InputStream中的三个read方法

/** Reads the next byte of data from the input stream. The value byte is
     * returned as an <code>int</code> in the range <code>0</code> to
     * <code>255</code>. If no byte is available because the end of the stream
     * has been reached, the value <code>-1</code> is returned. This method
     * blocks until input data is available, the end of the stream is detected,
     * or an exception is thrown.
     *
     * <p> A subclass must provide an implementation of this method.
     *
     * @return     the next byte of data, or <code>-1</code> if the end of the
     *             stream is reached.
     * @exception  IOException  if an I/O error occurs.
     */
    public abstract int read() throws IOException;

    /**
     * Reads some number of bytes from the input stream and stores them into
     * the buffer array <code>b</code>. The number of bytes actually read is
     * returned as an integer.  This method blocks until input data is
     * available, end of file is detected, or an exception is thrown.
     *
     * <p> If the length of <code>b</code> is zero, then no bytes are read and
     * <code>0</code> is returned; otherwise, there is an attempt to read at
     * least one byte. If no byte is available because the stream is at the
     * end of the file, the value <code>-1</code> is returned; otherwise, at
     * least one byte is read and stored into <code>b</code>.
     *
     * <p> The first byte read is stored into element <code>b[0]</code>, the
     * next one into <code>b[1]</code>, and so on. The number of bytes read is,
     * at most, equal to the length of <code>b</code>. Let <i>k</i> be the
     * number of bytes actually read; these bytes will be stored in elements
     * <code>b[0]</code> through <code>b[</code><i>k</i><code>-1]</code>,
     * leaving elements <code>b[</code><i>k</i><code>]</code> through
     * <code>b[b.length-1]</code> unaffected.
     *
     * <p> The <code>read(b)</code> method for class <code>InputStream</code>
     * has the same effect as: <pre><code> read(b, 0, b.length) </code></pre>
     *
     * @param      b   the buffer into which the data is read.
     * @return     the total number of bytes read into the buffer, or
     *             <code>-1</code> if there is no more data because the end of
     *             the stream has been reached.
     * @exception  IOException  If the first byte cannot be read for any reason
     * other than the end of the file, if the input stream has been closed, or
     * if some other I/O error occurs.
     * @exception  NullPointerException  if <code>b</code> is <code>null</code>.
     * @see        java.io.InputStream#read(byte[], int, int)
     */
    public int read(byte b[]) throws IOException {
        return read(b, 0, b.length);
    }

    /**
     * Reads up to <code>len</code> bytes of data from the input stream into
     * an array of bytes.  An attempt is made to read as many as
     * <code>len</code> bytes, but a smaller number may be read.
     * The number of bytes actually read is returned as an integer.
     *
     * <p> This method blocks until input data is available, end of file is
     * detected, or an exception is thrown.
     *
     * <p> If <code>len</code> is zero, then no bytes are read and
     * <code>0</code> is returned; otherwise, there is an attempt to read at
     * least one byte. If no byte is available because the stream is at end of
     * file, the value <code>-1</code> is returned; otherwise, at least one
     * byte is read and stored into <code>b</code>.
     *
     * <p> The first byte read is stored into element <code>b[off]</code>, the
     * next one into <code>b[off+1]</code>, and so on. The number of bytes read
     * is, at most, equal to <code>len</code>. Let <i>k</i> be the number of
     * bytes actually read; these bytes will be stored in elements
     * <code>b[off]</code> through <code>b[off+</code><i>k</i><code>-1]</code>,
     * leaving elements <code>b[off+</code><i>k</i><code>]</code> through
     * <code>b[off+len-1]</code> unaffected.
     *
     * <p> In every case, elements <code>b[0]</code> through
     * <code>b[off]</code> and elements <code>b[off+len]</code> through
     * <code>b[b.length-1]</code> are unaffected.
     *
     * <p> The <code>read(b,</code> <code>off,</code> <code>len)</code> method
     * for class <code>InputStream</code> simply calls the method
     * <code>read()</code> repeatedly. If the first such call results in an
     * <code>IOException</code>, that exception is returned from the call to
     * the <code>read(b,</code> <code>off,</code> <code>len)</code> method.  If
     * any subsequent call to <code>read()</code> results in a
     * <code>IOException</code>, the exception is caught and treated as if it
     * were end of file; the bytes read up to that point are stored into
     * <code>b</code> and the number of bytes read before the exception
     * occurred is returned. The default implementation of this method blocks
     * until the requested amount of input data <code>len</code> has been read,
     * end of file is detected, or an exception is thrown. Subclasses are encouraged
     * to provide a more efficient implementation of this method.
     *
     * @param      b     the buffer into which the data is read.
     * @param      off   the start offset in array <code>b</code>
     *                   at which the data is written.
     * @param      len   the maximum number of bytes to read.
     * @return     the total number of bytes read into the buffer, or
     *             <code>-1</code> if there is no more data because the end of
     *             the stream has been reached.
     * @exception  IOException If the first byte cannot be read for any reason
     * other than end of file, or if the input stream has been closed, or if
     * some other I/O error occurs.
     * @exception  NullPointerException If <code>b</code> is <code>null</code>.
     * @exception  IndexOutOfBoundsException If <code>off</code> is negative,
     * <code>len</code> is negative, or <code>len</code> is greater than
     * <code>b.length - off</code>
     * @see        java.io.InputStream#read()
     */
    public int read(byte b[], int off, int len) throws IOException {
        if (b == null) {
            throw new NullPointerException();
        } else if (off < 0 || len < 0 || len > b.length - off) {
            throw new IndexOutOfBoundsException();
        } else if (len == 0) {
            return 0;
        }

        int c = read();
        if (c == -1) {
            return -1;
        }
        b[off] = (byte)c;

        int i = 1;
        try {
            for (; i < len ; i++) {
                c = read();
                if (c == -1) {
                    break;
                }
                b[off + i] = (byte)c;
            }
        } catch (IOException ee) {
        }
        return i;
    }