MDI-II(Medium Dependent Interface- II mode),平行模式介质相关接口
MDI-X(Media Dependent Interface–x mode)交叉模式介质相关接口。X代表交错配置 (crossover),也就是一端的传输脚位连接到另外一端的接收脚位,因为脚位1、2定义为传送,脚位3、6定义为接收,所以在连接时,缆线一端脚位1连接到另外一端脚位3,缆线一端脚位2连接到另外一端的脚位6。形成1-3、2-6、3-1、6-2的连接,其余脚位则是一一相连。
同种设备用交叉线,异种设备用直连线。比方说,都是网卡或交换机,就用交叉线,如果是网卡连交换机,就用直连线。现在的交换机都有MDI / MDI-X 技术,就是自动识别技术,不管你是直连线还是交叉线,交换机就自动切换了。
RJ45 接线标准 586B 橙白 橙 绿白 蓝 蓝白 绿 棕白 棕
586A 绿白 绿 橙白 蓝 蓝白 橙 棕白 棕
Ports 1-11 (3C16464B) or 1-23 (3C16465B) are MDIX ports. Each can be connected to a device with an MDI port (such as a workstation) using a normal `straight through' TP (twisted pair) cable. Alternatively, you can connect to a device with MDIX ports using `cross-over' TP cable.
从中可以理解端口mdi-mdi,mdix-mdix之间连接需要用`cross-over' TP cable.,mdi-mdix之间连接需要用`straight through' TP cable.