Solaris 10 x86系统上添加新硬盘

• 用format命令，看看系统是不是已经识别了该硬盘，如果识别了，可以继续；如果没有识别，先想办法。
• bash-3.00# format
  Searching for disks...done
  
  
  AVAILABLE DISK SELECTIONS:
         0. c0d0 <DEFAULT cyl 17750 alt 2 hd 15 sec 63>
            /pci@0,0/pci-ide@7,1/ide@0/cmdk@0,0
         1. c2t0d0 <DEFAULT cyl 508 alt 2 hd 128 sec 32>
            /pci@0,0/pci1000,30@10/sd@0,0
• 1号盘就是我新添加的硬盘，在Specify disk (enter its number):后面键入1，表示要对1号盘进行操作。
• 在format〉提示符下键入p
• Warning: Current Disk has mounted partitions.
  
  
  FORMAT MENU:
          disk       - select a disk
          type       - select (define) a disk type
          partition  - select (define) a partition table
          current    - describe the current disk
          format     - format and analyze the disk
          fdisk      - run the fdisk program
          repair     - repair a defective sector
          label      - write label to the disk
          analyze    - surface analysis
          defect     - defect list management
          backup     - search for backup labels
          verify     - read and display labels
          save       - save new disk/partition definitions
          inquiry    - show vendor, product and revision
          volname    - set 8-character volume name
          !<cmd>     - execute <cmd>, then return
          quit
  format> p
  
  
  PARTITION MENU:
          0      - change `0' partition
          1      - change `1' partition
          2      - change `2' partition
          3      - change `3' partition
          4      - change `4' partition
          5      - change `5' partition
          6      - change `6' partition
          7      - change `7' partition
          select - select a predefined table
          modify - modify a predefined partition table
          name   - name the current table
          print  - display the current table
          label  - write partition map and label to the disk
          !<cmd> - execute <cmd>, then return
          quit
• 在partition>提示符下输入m，进行分区
  partition> m
  Select partitioning base:
          0. Current partition table (d)
          1. All Free Hog
  Choose base (enter number) [0]?
  选择1，重新进行分区;选择0 就是用已经保存的配置。我是新的所以选择1
• 我们这里，把这块盘的所有空间都分配给7；
  Enter size of partition '0' [0b, 0c, 0.00mb, 0.00gb]:[在这里添加几都可以]
  Enter size of partition '1' [0b, 0c, 0.00mb, 0.00gb]:［靠，这个一样］
  Enter size of partition '3' [0b, 0c, 0.00mb, 0.00gb]:
  Enter size of partition '4' [0b, 0c, 0.00mb, 0.00gb]:
  Enter size of partition '5' [0b, 0c, 0.00mb, 0.00gb]:
  Enter size of partition '6' [0b, 0c, 0.00mb, 0.00gb]:
  Part      Tag    Flag     Cylinders         Size            Blocks
    0       root    wm       0                0         (0/0/0)            0
    1       swap    wu       0                0         (0/0/0)            0
    2     backup    wu       0 - 24619       33.92GB    (24620/0/0) 71127180
    3 unassigned    wm       0                0         (0/0/0)            0
    4 unassigned    wm       0                0         (0/0/0)            0
    5 unassigned    wm       0                0         (0/0/0)            0
    6        usr    wm       0                0         (0/0/0)            0
    7 unassigned    wm       0 - 24619       33.92GB    (24620/0/0) 71127180
  可以看出，分区7和硬盘的总大小（2）相等
  下面是给该分区设置table为disk1_7
  Okay to make this the current partition table[yes]? disk1_7
• save，然后退出format
• 至此格式化完毕！
• bash-3.00# newfs /dev/dsk/c2t0d0s7
  newfs: construct a new file system /dev/rdsk/c2t0d0s7: (y/n)? y
  /dev/rdsk/c2t0d0s7:     1912832 sectors in 467 cylinders of 128 tracks, 32 sectors
          934.0MB in 30 cyl groups (16 c/g, 32.00MB/g, 15360 i/g)
  super-block backups (for fsck -F ufs -o b=#) at:
   32, 65600, 131168, 196736, 262304, 327872, 393440, 459008, 524576, 590144,
   1311392, 1376960, 1442528, 1508096, 1573664, 1639232, 1704800, 1770368,
   1835936, 1901504,
• bash-3.00# mount /dev/dsk/c2t0d0s7 /newdisk/ 
• bash-3.00# df -h
  Filesystem             size   used  avail capacity  Mounted on
  /dev/dsk/c0d0s0        3.7G   2.5G   1.2G    68%    /
  /devices                 0K     0K     0K     0%    /devices
  ctfs                     0K     0K     0K     0%    /system/contract
  proc                     0K     0K     0K     0%    /proc
  mnttab                   0K     0K     0K     0%    /etc/mnttab
  swap                   867M   492K   867M     1%    /etc/svc/volatile
  objfs                    0K     0K     0K     0%    /system/object
  /usr/lib/libc/libc_hwcap1.so.1
                         3.7G   2.5G   1.2G    68%    /lib/libc.so.1
  fd                       0K     0K     0K     0%    /dev/fd
  swap                   867M     4K   867M     1%    /tmp
  swap ...