redflag Dc5.0,Asianux2安装时无法创建文件系统，缺少scsi驱动解决办法

安装方法： 请将img文件制作成驱动软盘或驱动光盘，

在Linux下将img文件制作成驱动光盘的步骤：

1.将img文件保存到指定目录A中

2.在目录A中创建临时目录tmp

3.将img文件Mount到tmp目录中，命令为: mount megaraid_sas-v00.00.03.13-1-DC50-all.img tmp/ -o loop

4.将tmp目录中的所有文件刻录到光盘中即可

mkisofs -r -o cd.iso  tmp/

[root@localhost tmp]# cdrecord -scanbus
Cdrecord-Clone 2.01-dvd (--) Copyright (C) 1995-2004 J枚rg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to feedback@asianx.com
Note: The author of cdrecord should not be bothered with problems in this version.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c        1.83 04/05/20 Copyright 1997 J. Schilling').
scsibus0:
        0,0,0     0) 'hp      ' 'DVD A  DS8A5LH  ' '1HE4' Removable CD-ROM
        0,1,0     1) *
        0,2,0     2) *
        0,3,0     3) *
        0,4,0     4) *
        0,5,0     5) *
        0,6,0     6) *
        0,7,0     7) *

[root@localhost tmp]# cdrecord -scanbus
Cdrecord-Clone 2.01-dvd (--) Copyright (C) 1995-2004 J枚rg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to feedback@asianx.com
Note: The author of cdrecord should not be bothered with problems in this version.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c        1.83 04/05/20 Copyright 1997 J. Schilling').
scsibus0:
        0,0,0     0) 'hp      ' 'DVD A  DS8A5LH  ' '1HE4' Removable CD-ROM
        0,1,0     1) *
        0,2,0     2) *
        0,3,0     3) *
        0,4,0     4) *
        0,5,0     5) *
        0,6,0     6) *
        0,7,0     7) *

安装系统，请用安装光盘启动，在出现boot：时加入下列参数 linux dd 根据提示更换驱动盘，一般来说，系统会自动 加载驱动