参考网址:http://developer.android.com/reference/android/hardware/Camera.html
android.hardware.Camera
The Camera class is used to set image capture settings, start/stop preview, snap pictures, and retrieve frames for encoding for video. This class is a client for the Camera service, which manages the actual camera hardware.
权限AndroidManifest.xml:
<uses-sdk ………… />
下面写上:
<uses-permission android:name="android.permission.CAMERA" /> <uses-feature android:name="android.hardware.camera" /> <uses-feature android:name="android.hardware.camera.autofocus" />
如果涉及到存储,则还应当添加:
<uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE"/>
To take pictures with this class, use the following steps:
- 获取个Camera实例
open(int)
. - 获取已经存在(默认)的设置
getParameters()
. - 如果必要,可以修改返回的
Camera.Parameters
对象 and 调用setParameters(Camera.Parameters)
. - 如果需要,也可以调用
setDisplayOrientation(int)
. - 重要: 传递一个完全初始化后的
SurfaceHolder
到setPreviewDisplay(SurfaceHolder)
. Without a surface, the camera will be unable to start the preview. - 重要:
调用startPreview()
更新预览界面,预览必须在你拍照之前启动。 -
当你想要的时候,调用
takePicture(Camera.ShutterCallback, Camera.PictureCallback, Camera.PictureCallback, Camera.PictureCallback)
来捕获一张照片.等待 回调函数提供实际的图像数据。 - 照完之后,预览显示将会停止。如果想照更多的照片,请再次调用
startPreview()
. - 调用
stopPreview()
来通知更新预览界面。 - 重要:
调用release()
来释放相机,让其他应用程序使用. 应用程序应该用onPause()
(and re-open()
it inonResume()
)来立即释放相机.
To quickly switch to video recording mode, use these steps:
- Obtain and initialize a Camera and start preview as described above.
- Call
unlock()
to allow the media process to access the camera. - Pass the camera to
setCamera(Camera)
. SeeMediaRecorder
information about video recording. - When finished recording, call
reconnect()
to re-acquire and re-lock the camera. - If desired, restart preview and take more photos or videos.
- Call
stopPreview()
andrelease()
as described above.
This class is not thread-safe, and is meant for use from one event thread. Most long-running operations (preview, focus, photo capture, etc) happen asynchronously and invoke callbacks as necessary. Callbacks will be invoked on the event thread open(int)
was called from. This class's methods must never be called from multiple threads at once.
这个类不是线程安全的,并且是供一个事件线程使用。最长时间运行的操作(预览,对焦,照片拍摄等)发生 异步调用的回调是必要的。回调将在事件线程open(int)
被调用后被调用。这个类的方法,绝不能从多个线程立即调用。
Caution: Different Android-powered devices may have different hardware specifications, such as megapixel ratings and auto-focus capabilities. In order for your application to be compatible with more devices, you should not make assumptions about the device camera specifications.
注意:不同版本的Android手机可能有不同的硬件规格,如像素的分级和自动对焦功能。为了让您的应用程序能与更多的设备兼容,你不应该做出有关该设备的摄像头规格的假设。
Public Methods公共 | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
final void |
addCallbackBuffer(byte[] callbackBuffer)
Adds a pre-allocated buffer to the preview callback buffer queue.
| ||||||||||
final void |
autoFocus(
Camera.AutoFocusCallback cb)
Starts camera auto-focus and registers a callback function to run when the camera is focused.
| ||||||||||
final void |
cancelAutoFocus()
Cancels any auto-focus function in progress.
| ||||||||||
final boolean |
enableShutterSound(boolean enabled)
Enable or disable the default shutter sound when taking a picture.拍摄时启用或禁用默认的快门声。 | ||||||||||
static void |
getCameraInfo(int cameraId,
Camera.CameraInfo cameraInfo)
Returns the information about a particular camera.
| ||||||||||
static int |
getNumberOfCameras()
Returns the number of physical cameras available on this device.返回物理相机在此设备上可用的数目
| ||||||||||
Camera.Parameters |
getParameters()
Returns the current settings for this Camera service.
| ||||||||||
final void |
lock()
Re-locks the camera to prevent other processes from accessing it.
重新锁定摄像头,以防止其他进程访问它。
| ||||||||||
static Camera |
open(int cameraId)
Creates a new Camera object to access a particular hardware camera.
创建一个新的Camera对象来访问一个特定的硬件摄像头。
| ||||||||||
static Camera |
open()
Creates a new Camera object to access the first back-facing camera on the device.
创建一个新的Camera对象访问设备上的第一个背置摄像头。
| ||||||||||
final void |
reconnect()
Reconnects to the camera service after another process used it.
在另一个进程使用它后重新连接到相机服务
| ||||||||||
final void |
release()
Disconnects and releases the Camera object resources.
| ||||||||||
void |
setAutoFocusMoveCallback(
Camera.AutoFocusMoveCallback cb)
Sets camera auto-focus move callback.
| ||||||||||
final void |
setDisplayOrientation(int degrees)
Set the clockwise rotation of preview display in degrees.使用度数顺时针旋转预览显示
| ||||||||||
final void |
setErrorCallback(
Camera.ErrorCallback cb)
Registers a callback to be invoked when an error occurs.
| ||||||||||
final void |
setFaceDetectionListener(
Camera.FaceDetectionListener listener)
Registers a listener to be notified about the faces detected in the preview frame.
| ||||||||||
final void |
setOneShotPreviewCallback(
Camera.PreviewCallback cb)
Installs a callback to be invoked for the next preview frame in addition to displaying it on the screen. | ||||||||||
void |
setParameters(
Camera.Parameters params)
Changes the settings for this Camera service.
| ||||||||||
final void |
setPreviewCallback(
Camera.PreviewCallback cb)
Installs a callback to be invoked for every preview frame in addition to displaying them on the screen. | ||||||||||
final void |
setPreviewCallbackWithBuffer(
Camera.PreviewCallback cb)
Installs a callback to be invoked for every preview frame, using buffers supplied with | ||||||||||
final void |
setPreviewDisplay(
SurfaceHolder holder)
Sets the
Surface to be used for live preview.
| ||||||||||
final void |
setPreviewTexture(
SurfaceTexture surfaceTexture)
Sets the
SurfaceTexture to be used for live preview.
| ||||||||||
final void |
setZoomChangeListener(
Camera.OnZoomChangeListener listener)
Registers a listener to be notified when the zoom value is updated by the camera driver during smooth zoom.
| ||||||||||
final void |
startFaceDetection()
Starts the face detection.
启动人脸检测。 照相时显示的那个小框框
| ||||||||||
final void |
startPreview()
Starts capturing and drawing preview frames to the screen.
| ||||||||||
final void |
startSmoothZoom(int value)
Zooms to the requested value smoothly.
| ||||||||||
final void |
stopFaceDetection()
Stops the face detection.
| ||||||||||
final void |
stopPreview()
Stops capturing and drawing preview frames to the surface, and resets the camera for a future call to
startPreview() .
| ||||||||||
final void |
stopSmoothZoom()
Stops the smooth zoom.
| ||||||||||
final void |
takePicture(
Camera.ShutterCallback shutter,
Camera.PictureCallback raw,
Camera.PictureCallback jpeg)
Equivalent to takePicture(shutter, raw, null, jpeg). 相当于
| ||||||||||
final void |
takePicture(
Camera.ShutterCallback shutter,
Camera.PictureCallback raw,
Camera.PictureCallback postview,
Camera.PictureCallback jpeg)
Equivalent to takePicture(shutter, raw, null, jpeg).
| ||||||||||
final void |
unlock()
Unlocks the camera to allow another process to access it.
解锁摄像头,让另一个进程访问它。
|
Constants
public static final String ACTION_NEW_PICTURE
Broadcast Action: A new picture is taken by the camera, and the entry of the picture has been added to the media store. getData()
is URI of the picture.
public static final String ACTION_NEW_VIDEO
Broadcast Action: A new video is recorded by the camera, and the entry of the video has been added to the media store. getData()
is URI of the video.
public static final int CAMERA_ERROR_SERVER_DIED
Media server died. In this case, the application must release the Camera object and instantiate a new one.
See Also
public static final int CAMERA_ERROR_UNKNOWN
Public Methods
public final void addCallbackBuffer (byte[] callbackBuffer)
Adds a pre-allocated buffer to the preview callback buffer queue. Applications can add one or more buffers to the queue. When a preview frame arrives and there is still at least one available buffer, the buffer will be used and removed from the queue. Then preview callback is invoked with the buffer. If a frame arrives and there is no buffer left, the frame is discarded. Applications should add buffers back when they finish processing the data in them.
For formats besides YV12, the size of the buffer is determined by multiplying the preview image width, height, and bytes per pixel. The width and height can be read from getPreviewSize()
. Bytes per pixel can be computed from getBitsPerPixel(int)
/ 8, using the image format from getPreviewFormat()
.
If using the YV12
format, the size can be calculated using the equations listed in setPreviewFormat(int)
.
This method is only necessary when setPreviewCallbackWithBuffer(PreviewCallback)
is used. When setPreviewCallback(PreviewCallback)
or setOneShotPreviewCallback(PreviewCallback)
are used, buffers are automatically allocated. When a supplied buffer is too small to hold the preview frame data, preview callback will return null and the buffer will be removed from the buffer queue.
Parameters
callbackBuffer | the buffer to add to the queue. The size of the buffer must match the values described above. |
---|
public final void autoFocus (Camera.AutoFocusCallback cb)
Starts camera auto-focus and registers a callback function to run when the camera is focused. This method is only valid when preview is active (between startPreview()
and before stopPreview()
).
Callers should check getFocusMode()
to determine if this method should be called. If the camera does not support auto-focus, it is a no-op and onAutoFocus(boolean, Camera)
callback will be called immediately.
If your application should not be installed on devices without auto-focus, you must declare that your application uses auto-focus with the <uses-feature> manifest element.
If the current flash mode is not FLASH_MODE_OFF
, flash may be fired during auto-focus, depending on the driver and camera hardware.
Auto-exposure lock getAutoExposureLock()
and auto-white balance locks getAutoWhiteBalanceLock()
do not change during and after autofocus. But auto-focus routine may stop auto-exposure and auto-white balance transiently during focusing.
Stopping preview with stopPreview()
, or triggering still image capture with takePicture(Camera.ShutterCallback, Camera.PictureCallback, Camera.PictureCallback)
, will not change the the focus position. Applications must call cancelAutoFocus to reset the focus.
If autofocus is successful, consider using MediaActionSound
to properly play back an autofocus success sound to the user.
Parameters
cb | the callback to run |
---|
public final void cancelAutoFocus ()
Cancels any auto-focus function in progress. Whether or not auto-focus is currently in progress, this function will return the focus position to the default. If the camera does not support auto-focus, this is a no-op.
See Also
public final boolean enableShutterSound (boolean enabled)
Enable or disable the default shutter sound when taking a picture.
By default, the camera plays the system-defined camera shutter sound when takePicture(Camera.ShutterCallback, Camera.PictureCallback, Camera.PictureCallback)
is called. Using this method, the shutter sound can be disabled. It is strongly recommended that an alternative shutter sound is played in the Camera.ShutterCallback
when the system shutter sound is disabled.
Note that devices may not always allow disabling the camera shutter sound. If the shutter sound state cannot be set to the desired value, this method will return false. canDisableShutterSound
can be used to determine whether the device will allow the shutter sound to be disabled.
Parameters
enabled | whether the camera should play the system shutter sound when takePicture is called. |
---|
Returns
true
if the shutter sound state was successfully changed.false
if the shutter sound state could not be changed.true
is also returned if shutter sound playback is already set to the requested state.
public static void getCameraInfo (int cameraId, Camera.CameraInfo cameraInfo)
Returns the information about a particular camera. If getNumberOfCameras()
returns N, the valid id is 0 to N-1.
public static int getNumberOfCameras ()
Returns the number of physical cameras available on this device.
public Camera.Parameters getParameters ()
Returns the current settings for this Camera service. If modifications are made to the returned Parameters, they must be passed to setParameters(Camera.Parameters)
to take effect.
See Also
public final void lock ()
Re-locks the camera to prevent other processes from accessing it. Camera objects are locked by default unless unlock()
is called. Normally reconnect()
is used instead.
Since API level 14, camera is automatically locked for applications in start()
. Applications can use the camera (ex: zoom) after recording starts. There is no need to call this after recording starts or stops.
If you are not recording video, you probably do not need this method.
Throws
RuntimeException | if the camera cannot be re-locked (for example, if the camera is still in use by another process). |
---|
public static Camera open (int cameraId)
Creates a new Camera object to access a particular hardware camera. If the same camera is opened by other applications, this will throw a RuntimeException.
You must call release()
when you are done using the camera, otherwise it will remain locked and be unavailable to other applications.
Your application should only have one Camera object active at a time for a particular hardware camera.
Callbacks from other methods are delivered to the event loop of the thread which called open(). If this thread has no event loop, then callbacks are delivered to the main application event loop. If there is no main application event loop, callbacks are not delivered.
Caution: On some devices, this method may take a long time to complete. It is best to call this method from a worker thread (possibly using AsyncTask
) to avoid blocking the main application UI thread.
Parameters
cameraId | the hardware camera to access, between 0 and getNumberOfCameras() -1. |
---|
Returns
- a new Camera object, connected, locked and ready for use.
Throws
RuntimeException | if opening the camera fails (for example, if the camera is in use by another process or device policy manager has disabled the camera). |
---|
public static Camera open ()
Creates a new Camera object to access the first back-facing camera on the device. If the device does not have a back-facing camera, this returns null.
See Also
public final void reconnect ()
Reconnects to the camera service after another process used it. After unlock()
is called, another process may use the camera; when the process is done, you must reconnect to the camera, which will re-acquire the lock and allow you to continue using the camera.
Since API level 14, camera is automatically locked for applications in start()
. Applications can use the camera (ex: zoom) after recording starts. There is no need to call this after recording starts or stops.
If you are not recording video, you probably do not need this method.
Throws
IOException | if a connection cannot be re-established (for example, if the camera is still in use by another process). |
---|
public final void release ()
Disconnects and releases the Camera object resources.
You must call this as soon as you're done with the Camera object.
public void setAutoFocusMoveCallback (Camera.AutoFocusMoveCallback cb)
Sets camera auto-focus move callback.
Parameters
cb | the callback to run |
---|
public final void setDisplayOrientation (int degrees)
Set the clockwise rotation of preview display in degrees. This affects the preview frames and the picture displayed after snapshot. This method is useful for portrait mode applications. Note that preview display of front-facing cameras is flipped horizontally before the rotation, that is, the image is reflected along the central vertical axis of the camera sensor. So the users can see themselves as looking into a mirror.
This does not affect the order of byte array passed in onPreviewFrame(byte[], Camera)
, JPEG pictures, or recorded videos. This method is not allowed to be called during preview.
If you want to make the camera image show in the same orientation as the display, you can use the following code.
public static void setCameraDisplayOrientation(Activity activity, int cameraId, android.hardware.Camera camera) { android.hardware.Camera.CameraInfo info = new android.hardware.Camera.CameraInfo(); android.hardware.Camera.getCameraInfo(cameraId, info); int rotation = activity.getWindowManager().getDefaultDisplay() .getRotation(); int degrees = 0; switch (rotation) { case Surface.ROTATION_0: degrees = 0; break; case Surface.ROTATION_90: degrees = 90; break; case Surface.ROTATION_180: degrees = 180; break; case Surface.ROTATION_270: degrees = 270; break; } int result; if (info.facing == Camera.CameraInfo.CAMERA_FACING_FRONT) { result = (info.orientation + degrees) % 360; result = (360 - result) % 360; // compensate the mirror } else { // back-facing result = (info.orientation - degrees + 360) % 360; } camera.setDisplayOrientation(result); }
Starting from API level 14, this method can be called when preview is active.
Parameters
degrees | the angle that the picture will be rotated clockwise. Valid values are 0, 90, 180, and 270. The starting position is 0 (landscape). |
---|
See Also
public final void setErrorCallback (Camera.ErrorCallback cb)
Registers a callback to be invoked when an error occurs.
Parameters
cb | The callback to run |
---|
public final void setFaceDetectionListener (Camera.FaceDetectionListener listener)
Registers a listener to be notified about the faces detected in the preview frame.
Parameters
listener | the listener to notify |
---|
See Also
public final void setOneShotPreviewCallback (Camera.PreviewCallback cb)
Installs a callback to be invoked for the next preview frame in addition to displaying it on the screen. After one invocation, the callback is cleared. This method can be called any time, even when preview is live. Any other preview callbacks are overridden.
If you are using the preview data to create video or still images, strongly consider using MediaActionSound
to properly indicate image capture or recording start/stop to the user.
Parameters
cb | a callback object that receives a copy of the next preview frame, or null to stop receiving callbacks. |
---|
See Also
public void setParameters (Camera.Parameters params)
Changes the settings for this Camera service.
Parameters
params | the Parameters to use for this Camera service |
---|
Throws
RuntimeException | if any parameter is invalid or not supported. |
---|
See Also
public final void setPreviewCallback (Camera.PreviewCallback cb)
Installs a callback to be invoked for every preview frame in addition to displaying them on the screen. The callback will be repeatedly called for as long as preview is active. This method can be called at any time, even while preview is live. Any other preview callbacks are overridden.
If you are using the preview data to create video or still images, strongly consider using MediaActionSound
to properly indicate image capture or recording start/stop to the user.
Parameters
cb | a callback object that receives a copy of each preview frame, or null to stop receiving callbacks. |
---|
See Also
public final void setPreviewCallbackWithBuffer (Camera.PreviewCallback cb)
Installs a callback to be invoked for every preview frame, using buffers supplied with addCallbackBuffer(byte[])
, in addition to displaying them on the screen. The callback will be repeatedly called for as long as preview is active and buffers are available. Any other preview callbacks are overridden.
The purpose of this method is to improve preview efficiency and frame rate by allowing preview frame memory reuse. You must call addCallbackBuffer(byte[])
at some point -- before or after calling this method -- or no callbacks will received.
The buffer queue will be cleared if this method is called with a null callback, setPreviewCallback(Camera.PreviewCallback)
is called, or setOneShotPreviewCallback(Camera.PreviewCallback)
is called.
If you are using the preview data to create video or still images, strongly consider using MediaActionSound
to properly indicate image capture or recording start/stop to the user.
Parameters
cb | a callback object that receives a copy of the preview frame, or null to stop receiving callbacks and clear the buffer queue. |
---|
public final void setPreviewDisplay (SurfaceHolder holder)
Sets the Surface
to be used for live preview. Either a surface or surface texture is necessary for preview, and preview is necessary to take pictures. The same surface can be re-set without harm. Setting a preview surface will un-set any preview surface texture that was set via setPreviewTexture(SurfaceTexture)
.
The SurfaceHolder
must already contain a surface when this method is called. If you are using SurfaceView
, you will need to register a SurfaceHolder.Callback
with addCallback(SurfaceHolder.Callback)
and wait for surfaceCreated(SurfaceHolder)
before calling setPreviewDisplay() or starting preview.
This method must be called before startPreview()
. The one exception is that if the preview surface is not set (or set to null) before startPreview() is called, then this method may be called once with a non-null parameter to set the preview surface. (This allows camera setup and surface creation to happen in parallel, saving time.) The preview surface may not otherwise change while preview is running.
Parameters
holder | containing the Surface on which to place the preview, or null to remove the preview surface |
---|
Throws
IOException | if the method fails (for example, if the surface is unavailable or unsuitable). |
---|
public final void setPreviewTexture (SurfaceTexture surfaceTexture)
Sets the SurfaceTexture
to be used for live preview. Either a surface or surface texture is necessary for preview, and preview is necessary to take pictures. The same surface texture can be re-set without harm. Setting a preview surface texture will un-set any preview surface that was set via setPreviewDisplay(SurfaceHolder)
.
This method must be called before startPreview()
. The one exception is that if the preview surface texture is not set (or set to null) before startPreview() is called, then this method may be called once with a non-null parameter to set the preview surface. (This allows camera setup and surface creation to happen in parallel, saving time.) The preview surface texture may not otherwise change while preview is running.
The timestamps provided by getTimestamp()
for a SurfaceTexture set as the preview texture have an unspecified zero point, and cannot be directly compared between different cameras or different instances of the same camera, or across multiple runs of the same program.
If you are using the preview data to create video or still images, strongly consider using MediaActionSound
to properly indicate image capture or recording start/stop to the user.
Parameters
surfaceTexture | the SurfaceTexture to which the preview images are to be sent or null to remove the current preview surface texture |
---|
Throws
IOException | if the method fails (for example, if the surface texture is unavailable or unsuitable). |
---|
public final void setZoomChangeListener (Camera.OnZoomChangeListener listener)
Registers a listener to be notified when the zoom value is updated by the camera driver during smooth zoom.
Parameters
listener | the listener to notify |
---|
See Also
public final void startFaceDetection ()
Starts the face detection. This should be called after preview is started. The camera will notify Camera.FaceDetectionListener
of the detected faces in the preview frame. The detected faces may be the same as the previous ones. Applications should call stopFaceDetection()
to stop the face detection. This method is supported if getMaxNumDetectedFaces()
returns a number larger than 0. If the face detection has started, apps should not call this again.
When the face detection is running, setWhiteBalance(String)
, setFocusAreas(List)
, and setMeteringAreas(List)
have no effect. The camera uses the detected faces to do auto-white balance, auto exposure, and autofocus.
If the apps call autoFocus(AutoFocusCallback)
, the camera will stop sending face callbacks. The last face callback indicates the areas used to do autofocus. After focus completes, face detection will resume sending face callbacks. If the apps call cancelAutoFocus()
, the face callbacks will also resume.
After calling takePicture(Camera.ShutterCallback, Camera.PictureCallback, Camera.PictureCallback)
or stopPreview()
, and then resuming preview with startPreview()
, the apps should call this method again to resume face detection.
Throws
IllegalArgumentException | if the face detection is unsupported. |
---|---|
RuntimeException | if the method fails or the face detection is already running. |
public final void startPreview ()
Starts capturing and drawing preview frames to the screen. Preview will not actually start until a surface is supplied with setPreviewDisplay(SurfaceHolder)
or setPreviewTexture(SurfaceTexture)
.
If setPreviewCallback(Camera.PreviewCallback)
, setOneShotPreviewCallback(Camera.PreviewCallback)
, or setPreviewCallbackWithBuffer(Camera.PreviewCallback)
were called, onPreviewFrame(byte[], Camera)
will be called when preview data becomes available.
public final void startSmoothZoom (int value)
Zooms to the requested value smoothly. The driver will notify Camera.OnZoomChangeListener
of the zoom value and whether zoom is stopped at the time. For example, suppose the current zoom is 0 and startSmoothZoom is called with value 3. The onZoomChange(int, boolean, Camera)
method will be called three times with zoom values 1, 2, and 3. Applications can call stopSmoothZoom()
to stop the zoom earlier. Applications should not call startSmoothZoom again or change the zoom value before zoom stops. If the supplied zoom value equals to the current zoom value, no zoom callback will be generated. This method is supported if isSmoothZoomSupported()
returns true.
Parameters
value | zoom value. The valid range is 0 to getMaxZoom() . |
---|
Throws
IllegalArgumentException | if the zoom value is invalid. |
---|---|
RuntimeException | if the method fails. |
public final void stopPreview ()
Stops capturing and drawing preview frames to the surface, and resets the camera for a future call to startPreview()
.
public final void stopSmoothZoom ()
Stops the smooth zoom. Applications should wait for the Camera.OnZoomChangeListener
to know when the zoom is actually stopped. This method is supported if isSmoothZoomSupported()
is true.
Throws
RuntimeException | if the method fails. |
---|
public final void takePicture (Camera.ShutterCallback shutter, Camera.PictureCallback raw, Camera.PictureCallback jpeg)
Equivalent to takePicture(shutter, raw, null, jpeg).
public final void takePicture (Camera.ShutterCallback shutter, Camera.PictureCallback raw, Camera.PictureCallback postview, Camera.PictureCallback jpeg)
Triggers an asynchronous image capture. The camera service will initiate a series of callbacks to the application as the image capture progresses. The shutter callback occurs after the image is captured. This can be used to trigger a sound to let the user know that image has been captured. The raw callback occurs when the raw image data is available (NOTE: the data will be null if there is no raw image callback buffer available or the raw image callback buffer is not large enough to hold the raw image). The postview callback occurs when a scaled, fully processed postview image is available (NOTE: not all hardware supports this). The jpeg callback occurs when the compressed image is available. If the application does not need a particular callback, a null can be passed instead of a callback method.
This method is only valid when preview is active (after startPreview()
). Preview will be stopped after the image is taken; callers must call startPreview()
again if they want to re-start preview or take more pictures. This should not be called between start()
and stop()
.
After calling this method, you must not call startPreview()
or take another picture until the JPEG callback has returned.
Parameters
shutter | the callback for image capture moment, or null |
---|---|
raw | the callback for raw (uncompressed) image data, or null |
postview | callback with postview image data, may be null |
jpeg | the callback for JPEG image data, or null |
public final void unlock ()
Unlocks the camera to allow another process to access it. Normally, the camera is locked to the process with an active Camera object until release()
is called. To allow rapid handoff between processes, you can call this method to release the camera temporarily for another process to use; once the other process is done you can call reconnect()
to reclaim the camera.
This must be done before calling setCamera(Camera)
. This cannot be called after recording starts.
If you are not recording video, you probably do not need this method.
Throws
RuntimeException | if the camera cannot be unlocked. |
---|
Protected Methods
protected void finalize ()
Invoked when the garbage collector has detected that this instance is no longer reachable. The default implementation does nothing, but this method can be overridden to free resources.
Note that objects that override finalize
are significantly more expensive than objects that don't. Finalizers may be run a long time after the object is no longer reachable, depending on memory pressure, so it's a bad idea to rely on them for cleanup. Note also that finalizers are run on a single VM-wide finalizer thread, so doing blocking work in a finalizer is a bad idea. A finalizer is usually only necessary for a class that has a native peer and needs to call a native method to destroy that peer. Even then, it's better to provide an explicit close
method (and implement Closeable
), and insist that callers manually dispose of instances. This works well for something like files, but less well for something like a BigInteger
where typical calling code would have to deal with lots of temporaries. Unfortunately, code that creates lots of temporaries is the worst kind of code from the point of view of the single finalizer thread.
If you must use finalizers, consider at least providing your own ReferenceQueue
and having your own thread process that queue.
Unlike constructors, finalizers are not automatically chained. You are responsible for calling super.finalize()
yourself.
Uncaught exceptions thrown by finalizers are ignored and do not terminate the finalizer thread. See Effective Java Item 7, "Avoid finalizers" for more.