aruba控制器show ap后面的命令

命 令	说 明	中 文
active	Show APs currently registered or have some clients	显示当前注册的AP或具有某些客户端
	terminating (in cluster) on this switch	在此交换机上终止（在群集中）
allowed-channels	Show the set of allowed channels	显示允许的频道集
allowed-max-EIRP	Show max EIRP setting per country per AP type	显示每个国家/地区/AP类型的最大EIRP设置
amon	Show AMON message information	显示AMON消息信息
analytics	Recommendations from Analytics	分析的建议
antenna-status	Show operational status of AP antennas	显示AP天线的工作状态
ap-cert-mgr	Show contents of /tmp/ap_cert_mgr_debug_log for an AP	显示ap的/tmp/ap_cert_mgr_debug_log的内容
ap-group	Show contents of AP's group	显示AP组的内容
arm	Show ARM Information	显示ARM信息
	assoc-throttle-counters Show counters related to association request throttling.	assoc节流计数器显示与关联请求节流相关的计数器。
association	Show Association table for an AP	显示AP的关联表
authorization-profile	Show an AP Authorization profile	显示AP授权配置文件
band-steering-clients	Show Band Steering State	显示波段转向状态
denylist-clients	Show all clients being DoSed	显示所有被拒绝的客户端
denylist-protected	Show all clients that are currently protected against further traffic steering related DoS actions for a period of time	显示当前受保护的所有客户端的进一步流量导向相关DoS操作一段时间
denylist-time	Show the amount of time of the STA when it is added to	显示STA添加到的时间量
	the denylist in between disconnection and user-timeout	介于断开连接和用户超时之间的denylist
ble-database	Show BLE APB information collected by BLE relay	显示BLE继电器收集的BLE APB信息
ble-ibeacon-info	Show AP's BLE radio iBeacon parameters	显示AP的BLE收音机iBeacon参数
bss-table	Show bssids of all APs registered on this switch	显示在此交换机上注册的所有AP的bssid
bw-report	Show bandwidth allocation report for an AP	显示AP的带宽分配报告
cellular	Show cellular information	显示蜂窝信息
client	Show wireless client specific information	显示无线客户端特定信息
cluster-tech-support	Display cluster information for an AP	显示AP的群集信息
config	Show AP configuration parameters. Must specify ap-name	显示AP配置参数。必须指定ap名称
	and/or ap-group and optionally essid.	和/或ap组和任选的essid。
consolidated-provision	Show consolidated provision	显示合并准备金
convert-download-log	show conversion image downloading logs.	显示转换图像下载日志。
convert-image-list	list all available images for conversion.	列出所有可供转换的图像。
convert-setup-image-log	show conversion setup image logs.	显示转换设置图像日志。
convert-status	Show status of AP image conversion operation	显示AP图像转换操作的状态
convert-status-list	Show only the list of APs and their conversion statuses.	仅显示AP及其转换状态的列表。
convert-status-summary	Show summary of status of conversion operation (the	显示转换操作的状态摘要（
	list of APs is omitted)	省略了AP列表）
database	Show list of access points this switch knows about	显示此交换机知道的接入点列表
database-summary	Show summary of access points this switch knows about	显示此交换机了解的接入点摘要
debug	Show debugging information of an AP	显示AP的调试信息
deploy-profile	Show the ap deploy-profile	显示ap部署配置文件
details	Show details about an AP.	显示有关AP的详细信息。
enet-link-profile	Show an AP Ethernet Link profile	显示AP以太网链路配置文件
essid	Show ESSID Information	显示ESSID信息
est-status	Show contents of /tmp/est_status for an AP	显示AP的/tmp/est_status的内容
general-profile	Show the ap general-profile	显示ap常规配置文件
get-crash-dumps-status	Show get crash dumps status	显示获取崩溃转储状态
global	Show AP's central Database	显示AP的中央数据库
gps	GPS	全球定位系统
greenap	AP which supports green mode	支持绿色模式的AP
he-rates	Show high-efficiency rate information for a BSS	显示BSS的高效速率信息
ht-rates	Show high-throughput rate information for a BSS	显示BSS的高吞吐量信息
image	Displays Image version	显示图像版本
image-preload	Show status of AP image preload operation	显示AP图像预加载操作的状态
ip	health check ip probe mode	健康检查ip探测模式
license-usage	Show AP license usage information	显示AP许可证使用信息
lldp	Link-layer Discovery Protocol	链路层发现协议
load-balancing	Show All BSS where load balancing is enabled	显示启用负载平衡的所有BSS
mesh	Display all information for a Mesh AP	显示网格AP的所有信息
mesh-accesslist-profile	Show a Mesh Accesslist profile	显示网格访问列表配置文件
mesh-cluster-profile	Show a Mesh Cluster profile	显示网格簇轮廓
mesh-ht-ssid-profile	Show a Mesh High-throughput SSID profile	显示网格高吞吐量SSID配置文件
mesh-radio-profile	Show a Mesh Radio profile	显示网格无线电配置文件
mesh-recovery-profile	Show mesh recovery profile information	显示网格恢复配置文件信息
mfg-image-download-log	show manufacturing image downloading logs.	显示生产图像下载日志。
mfg-image-setup-image..	show manufacturing image upgrade setup image logs.	显示制造映像升级设置映像日志。
mfg-image-upgrade	Show status of AP manufacturing image upgrade operation	显示AP制造图像升级操作的状态
mfg-image-upgrade-list	list all available images for upgrade.	列出所有可升级的映像。
mfg-image-upgrade-sta..	Show only the list of APs and their upgrade statuses.	仅显示AP及其升级状态的列表。
mfg-image-upgrade-sta..	Show summary of status of image upgrade operation (the	显示映像升级操作的状态摘要（
	list of APs is omitted)	省略了AP列表）
modem-download-log	show modem image downloading logs.	显示调制解调器映像下载日志。
modem-upgrade-status	Show status of AP modem upgrade	显示AP调制解调器升级的状态
monitor	Show Air Monitor information	显示空气监测器信息
multizone-profile	Show an AP multizone profile	显示AP多区域配置文件
network-check	Network Check	网络检查
owe-tm-info	Information about OWE Transition VAPs generated	生成的OWE过渡VAP信息
packet-capture	Packet Capture commands	数据包捕获命令
papi-err	Show papi send error on current SAP of controller STM	在控制器STM的当前SAP上显示papi发送错误
port	Show AP wired port information	显示AP有线端口信息
power-mgmt-statistics	Show AP power status statistics	显示AP电源状态统计信息
profile-usage	Show configuration profiles in use by an AP or a	显示AP或
	specific BSSID.	特定BSSID。
provisioning	Show provisioning parameters an AP is currently using	显示AP当前正在使用的配置参数
provisioning-profile	Show a Provisioning profile	显示资源调配配置文件
provisioning-rule	Show an ap provisioning rule	显示ap设置规则
provisioning-rules	Show the ap provisioning rules	显示ap配置规则
radio-database	Show radio information for access points this switch	显示此交换机接入点的无线电信息
	knows about	知道的
radio-summary	Show AP radios currently registered on this switch	显示当前在此交换机上注册的AP无线电
ranging-results	show ranging results	显示测距结果
regulatory	Regulatory version used by APs	AP使用的监管版本
regulatory-domain-pro..	Show a Regulatory Domain profile	显示监管域配置文件
remote	Show information from AP	显示来自AP的信息
remote-packet-capture	Remote Packet Capture commands	远程数据包捕获命令
sapd-debug	Show contents of /tmp/sapd_debug for an AP	显示AP的/tmp/sapd_debug的内容
snmp	Display SNMP Tables	显示SNMP表
spectrum	Show Spectrum Monitor information	显示频谱监视器信息
spectrum-load-balancing	Show spectrum load balancing information	显示频谱负载平衡信息
standby	Show Standby APs currently registered on this switch	显示当前在此交换机上注册的备用AP
system-profile	Show an AP system profile	显示AP系统配置文件
tech-support	Display all information for an AP	显示AP的所有信息
thermal	AP which in overheat	AP过热
uac-database	Show UAC AP database for cluster	显示群集的UAC AP数据库
usb	Show usb information	显示usb信息
usb-acl-prof	Show an AP USB ACL profile	显示AP USB ACL配置文件
usb-device-mgmt	USB device management	USB设备管理
usb-profile	Show an AP USB profile	显示AP USB配置文件
vht-rates	Show very-high-throughput rate information for a BSS	显示BSS的极高吞吐率信息
virtual-beacon-report	Show Virtual Beacon report for client	显示客户端的虚拟信标报告
vlan-mcast	Show user count in each vlan and timestamps for tunnel	显示每个vlan中的用户计数和隧道的时间戳
	to join/leave vlan-mcast group	加入/离开vlan mcast组
vlan-usage	Show client VLAN usage	显示客户端VLAN使用情况
wifi-uplink	WiFi uplink commands	WiFi上行链路命令
wifi-uplink-profile	Show a WiFi uplink profile	显示WiFi上行链路配置文件
wired	Wired Info	有线信息
wired-ap-profile	Show a Wired AP profile	显示有线AP配置文件
wired-port-profile	Show an AP wired port profile	显示AP有线端口配置文件
wmm-flow	Show WMM Flows active on the AP	在AP上显示活动的WMM流
zigbee-client-database	Show all AP's Zigbee client information	显示所有AP的Zigbee客户端信息

本文来自：林松的个人博客网站！http://linsong.online