Wince的调试串口修改

友坚6410其BSP的默认调试串口为com0（STEPLDR、EBOOT、Wince的都是），现在在wince中使用COM0想把调试口修改到wince的COM3，可以如下操作。

修改E:/WINCE600/PLATFORM/SMDK6410/SMDK6410.bat中的

set BSP_NOUART0=1
set BSP_NOUART1=
set BSP_NOUART2=
set BSP_NOUART3=

……

set BSP_DEBUGPORT=SERIAL_UART0
@REM set BSP_DEBUGPORT=SERIAL_UART1
@REM set BSP_DEBUGPORT=SERIAL_UART2
@REM set BSP_DEBUGPORT=SERIAL_UART3

 

修改为：

set BSP_NOUART0=
set BSP_NOUART1=
set BSP_NOUART2=
set BSP_NOUART3=1

……

@REM set BSP_DEBUGPORT=SERIAL_UART0
@REM set BSP_DEBUGPORT=SERIAL_UART1
@REM set BSP_DEBUGPORT=SERIAL_UART2
set BSP_DEBUGPORT=SERIAL_UART3

 

重新生成STEPLDR.bin、EBOOT.bin、nk.bin烧入核心板启动，Wince启动后在

DEBUG: CreateSerialObject 2

OALIntrRequestSysIntr(irq = 63, sysIntr = 30)

卡住

 

寻找资料后，需要修改E:/WINCE600/PLATFORM/SMDK6410/CESYSGEN/files/platform.reg，把

;IF BSP_NOUART2 !
;IF BSP_KITL != SERIAL_UART2
;IF BSP_NOIRDA2
;--------------- UART2 (Physical COM2 Port) ----------------------------------
;[HKEY_LOCAL_MACHINE/Drivers/BuiltIn/Serial2]
; "DeviceArrayIndex"=dword:2
; "Irq"=dword:3F    ; UART2 Virtual IRQ = 63 (0x3F), Physical IRQ = 39
; "MemBase"=dword:7F005800
; "MemLen"=dword:40
;;    "ISTTimeouts"=dword:200  ; every 512 ticks checking Modem status.
; "Prefix"="COM"
; "Index"=dword:3
; "Dll"="smdk6410_serial.dll"
; "Order"=dword:30
; "Port"="COM3:"
;   "DeviceType"=dword:0
;    "FriendlyName"=LOC_DISPLAYNAME_COM3
;    "Tsp"="unimodem.dll"
;    "IClass"="{CC5195AC-BA49-48a0-BE17-DF6D1B0173DD}"
;    "DevConfig"=hex: 10,00, 00,00, 05,00,00,00, 10,01,00,00, 00,4B,00,00, 00,00, 08, 00, 00, 00,00,00,00
;--------------------------------------------------------------------------
;ENDIF
;ENDIF
;ENDIF

;IF BSP_NOUART3 !
;IF BSP_KITL != SERIAL_UART3
;IF BSP_NOIRDA3
;--------------- UART3 (Physical COM2 Port) ----------------------------------
;[HKEY_LOCAL_MACHINE/Drivers/BuiltIn/Serial3]
; "DeviceArrayIndex"=dword:3
; "Irq"=dword:40    ; UART3 Virtual IRQ = 64 (0x40), Physical IRQ = 40
; "MemBase"=dword:7F005C00
; "MemLen"=dword:40
;; "ISTTimeouts"=dword:200  ; every 512 ticks checking Modem status.
; "Prefix"="COM"
; "Index"=dword:4
; "Dll"="smdk6410_serial.dll"
; "Order"=dword:30
; "Port"="COM4:"
; "DeviceType"=dword:0
; "FriendlyName"=LOC_DISPLAYNAME_COM4
; "Tsp"="unimodem.dll"
; "IClass"="{CC5195AC-BA49-48a0-BE17-DF6D1B0173DD}"
; "DevConfig"=hex: 10,00, 00,00, 05,00,00,00, 10,01,00,00, 00,4B,00,00, 00,00, 08, 00, 00, 00,00,00,00
;;--------------------------------------------------------------------------
;ENDIF
;ENDIF
;ENDIF

 

这部分全部注释即可解决以上问题。