ETSI TS 131 101 V8.2.0 UICC-terminal interface - 1

>>> Scope

The present document specifies the interface between the UICC and the Terminal for 3G telecom network operation.
The present document specifies:
- the requirements for the physical characteristics of the UICC;
- the electrical interface between the UICC and the Terminal;
- the initial communication establishment and the transport protocols;
- the model which serves as a basis for the logical structure of the UICC;
- the communication commands and the procedures;
- the application independent files and protocols.

 

>>> General 3GPP platform requirements

GSM/USIM application interaction and restrictions

Activation of a USIM session excludes the activation of a GSM session. In particular, this implies that once a USIM
application session has been activated, commands sent to the UICC with CLAss byte set to 'A0' shall return SW1SW2
'6E 00' (class not supported) to the terminal.
Similarly, activation of a GSM session excludes the activation of a USIM session.
At most one USIM session can be active at the same time.

 

3GPP platform overview

The UICC/terminal interface shall support the interface specified in ETSI TS 102 221. In addition, the
UICC/terminal interface may support the Inter-Chip USB interface defined in ETSI TS 102 600.

 

ISIM - IP 多媒体服务识别模块（IP Multimedia Services Identity Module） IP 多媒体服务识别模块（ISIM） 是一个运行在一个IP 多媒体子系统的3G 移动电话中全球集成电路卡（UICC）智能卡中的一个应用程序。它包括识别和鉴别到IMS 的用户的参数。ISIM 应用程序能够与SIM 和USIM 共存在相同的UICC 中，使它可能来使用相同的智能卡在GSM 网络和更早发布的UMTS 两者中。

---

In addition, cards and terminals supporting an application based on the present specification shall support the
transmission factor (F,D)=(512,32).
It is recommended that terminals and cards supporting Multimedia Message storage functionality (see TS 31.102 [2])
support the transmission factor (F,D)=(512,64) in addition to those specified in the present document.