博科300光交配置/cisco mds9000系列交换机配置

1.博科交换机基本配置
第一台光交：
username:admin password:password
sw4100:admin>switchshow (确定背板号码：1)
alicreate "STOR_controlA0_1","1,0"
alicreate "STOR_controlB0_1","1,1"
alicreate "SERV1_Host1","1,2"
alicreate "SERV2_Host1","1,3"
zonecreate "Zone_SEVR1","STOR_controlA0_1;STOR_controlB_1; SERV1_Host1"
zonecreate "Zone_SEVR2","STOR_controlA0_1;STOR_controlB_1; SERV2_Host1"
cfgcreate "Cfg_IMS","Zone_SEVR1; Zone_SEVR2"
sw4100:admin>cfgenable "Cfg_IMS"
sw4100:admin>cfgsave


博科交换机web界面登录地址：http://10.77.77.77 用户名：admin  密码：password
（root/password）
参考：
 

2.cisco光交其他口用于另外一个存储及其机器
alicreate "STOR_control2A0_1","1,10"
alicreate "STOR_control2B0_1","1,11"
alicreate "SERV1_Host12","1,12"
alicreate "SERV2_Host13","1,13"
zonecreate "Zone_SEVR12","STOR_control2A0_1;STOR_control2B_1; SERV1_Host12"
zonecreate "Zone_SEVR13","STOR_control2A0_1;STOR_control2B_1; SERV2_Host13"
cfgadd "Cfg_IMS","Zone_SEVR12; Zone_SEVR13"
sw4100:admin>cfgenable "Cfg_IMS"

sw4100:admin>cfgsave

光交配置案例：
 
STOR_controlA0_1   STOR_controlBA0_1   SERV_Host1   SERV_Host2
配置VSAN:
vsan  database
vsan 100 name SAN01
vsan 100 interface fc1/0 - fc1/9
创建ZONE
zone name SERV_Host1 vsan 100
member interface fc1/2
zone name SERV_Host2 vsan 100
member interface fc1/3
zone name STOR_control vsan 100
member interface fc1/0
member interface fc1/1
配置zoneset：
zoneset name SERV_Host1 vsan 100
member SERV_Host1 
zoneset name SERV_Host2 vsan 100
member SERV_Host2
zoneset name STOR_control vsan 100
member STOR_control 
激活ZONE:
zoneset activate name SERV_Host1 vsan 100
zoneset activate name SERV_Host2 vsan 100
zoneset activate name STOR_control vsan 100


查看激活ZONE:
show zone active