vmware和vmware tools install doc(记录)

Install VMware Tools in a Linux Guest 

Before you begin, make sure the virtual machine is powered on and the guest operating system is running.

To install VMware Tools in a Linux guest

1	On the host, select VM > Install VMware Tools.

If an earlier version of VMware Tools is installed, the menu item is Update VMware Tools. If the current version is installed, the menu item is Reinstall VMware Tools.

2	On the guest, log in as root.

3	If your Linux distribution does not automatically mount CD-ROMs, mount the VMware Tools virtual CD-ROM image.

a	If necessary, create the /mnt/cdrom directory:

mkdir /mnt/cdrom

b	Mount the CD-ROM drive.

Some Linux distributions use different device names or organize the /dev directory differently. If your CD-ROM drive is not /dev/cdrom or if the mount point for a CD-ROM is not /mnt/cdrom, modify the command to reflect the conventions used by your distribution.

mount /dev/cdrom /mnt/cdrom

4	Change to a working directory (for example, /tmp):

cd /tmp

5	If a previous installation exists, delete the previous vmware-tools-distrib directory.

The location of this directory depends on where you placed it during the previous installation. Often it is placed in /tmp/vmware-tools-distrib.

6	Uncompress the installer:

tar zxpf /mnt/cdrom/VMwareTools-<x.x.x>-<yyyy>.tar.gz

The value <x.x.x> is the product version number and <yyyy> is the build number of the product release.

7	If necessary, unmount the CD-ROM image.

If your Linux distribution automatically mounted the CD-ROM, you do not need to unmount the image.

umount /dev/cdrom

8	Run the VMware Tools installer.

cd vmware-tools-distrib

./vmware-install.pl

Respond to the questions the command-line wizard displays on the screen. Press Enter to accept the default value. The configuration file, vmware-config-tools.pl, runs after the installer file finishes running.

9	If you are updating VMware Tools, reboot the virtual machine or manually reload the pvscsi, vmxnet, and vmxnet3 Linux kernel modules.

If you reload the modules, networking on the virtual machine is interrupted.

10	Enter the following commands to restore the network:

/etc/init.d/network stop

rmmod vmxnet

modprobe vmxnet

/etc/init.d/network start

11	Log out of the root account.

exit

12	(Optional) Start your graphical environment.

13	In an X terminal, to start the VMware User process, enter the following command:

vmware-user

To change the default VMware Tools configuration options, see Open the VMware Tools Control Panel.

有时候安装会跑到没有权限，而且这个Vmware workstation的安装文件还一定要放到登录用户同名的目录下或子文件夹里面，如root登录，就在root下

sudo chmod +x VMware-Workstation-Full-9.0.0-812388.x86_64.bundle

sudo ./VMware-Workstation-Full-9.0.0-812388.x86_64.bundle