BloomFilter布隆过滤器C，Python，Redis实现

最新推荐文章于 2024-07-24 14:07:28 发布

oio328Loio

最新推荐文章于 2024-07-24 14:07:28 发布

阅读量1.3k

点赞数

分类专栏： Python

本文链接：https://blog.csdn.net/hoho1151191150/article/details/85014644

版权

Python 专栏收录该内容

8 篇文章 0 订阅

订阅专栏

Python实现：https://github.com/chfguo/bloomfilter

基本原理：

在进行布隆过滤器的介绍前，先说一下位数组（bit array）。所谓的位数组，主要是为了有效地利用内存空间而设计的一种存储数据的方式。在这种结构中一个整数在内存中用一位（1 bit）表示。这里所谓的表示就是如果整数存在，相应的二进制位就为 1，否则为 0。

布隆过滤器便利用了位数组的特性，它通过 hash 函数（为了降低 hash 函数的冲突效应，一般会选择多个随机的 hash 函数）将一个元素映射成一个位数组（Bit array）中的某些点上。在检索的时候，通过判断这些点是不是 1 来判读集合中有没有某个特定的元素。这就是布隆过滤器的基本思想。

举个例子，假设我们有 4 个元素 ‘cat’，‘dog’，‘pig’，‘bee’，选择 3 个 hash 函数，位数组长度为 10。为了方便说明，我们依次修改位数组的值。当插入第一个元素时 ‘cat’ 后，位数组变为：
在这里插入图片描述
当插入 ‘dog’ 和 ‘pig’ 后，位数组变为：

当我们查询 ‘bee’ 的时候，如果，‘bee’ 有一位或两位映射在 9，10 位上，则可以正确判断出元素 ‘bee’ 不在集合中，但是如果 ‘bee’ 被映射在 1-8 位上则会出现误判，并且随着元素增加，误判率会逐渐增加。
布隆过滤器的判断有以下特点：

如果判断一个元素在集合中，那么这个元素有一定概率不在集合中（会出现误判）
如果判断一个元素不在集合中，那么这个元素一定不在集合中（不会出现误判）

上面的例子说明了布隆过滤器的插入过程和误判率的问题，在这个例子中涉及三个重要数值：

需要存放的集合中元素的个数 $n$
位数组的长度 $m$
hash 函数的个数 $k$

通过一定的计算(参考这里)，可以计算出最优的 $m$ 和 $k$ :
$m=-\frac{n\ln\epsilon}{(\ln2)^2}, k=\ln2\frac{m}{n}$

C语言实现

位数组的实现

我们可以利用 char 数组实现位数组 char *bit_arr，对于一个数字，比如 26，它应该存放在这个 char 数组的第 4 个 char 中，即 bit_arr[3] 中，如果按照高位在前，低位在后的顺序，它应该在 (26 & 0x7 + 1) 的位置， & 0x7 可以取得一个数字的二进制的最后三位，相当于取除 8 的余数，最后利用 1<< 将该位设置为 1。这样的获得的位数组是：7 6 5 4 3 2 1 0 – 15 14 13 12 11 10 9 8 – 23 22 21 20 19 18 17 16 – 31 30 29 28 27 26 25 24–…，如果要改正这个顺序，将 26 & 0x7 改为 7 - （26 & 0x7）
具体实现：

//插入函数
void add_to_bitarray(char *bitarr, uint64_t num){   /* num代表要插进数组中的数 */
	// SHIFT = 3， num >> SHIFT 相当于 num/8
	// MASK = 0x7， num & MASK 相当于取余数
    bitarr[num >> SHIFT] |= (1 << (num & MASK)); 
}
//查询函数
int is_in_bitarray(char *bitarr, int num){
    return bitarr[num >> SHIFT] & (1 << (num & MASK));
}

Hash 函数

Hash 函数选用 MurmurHash。MurmurHash 是一种非加密型哈希函数，适用于一般的哈希检索操作。已经被应用到很多开源项目如Redis，Memcached，Cassandra，HBase，Lucene等。与其它流行的哈希函数相比，对于规律性较强的key，MurmurHash的随机分布特征表现更良好。
具体实现：

uint64_t MurmurHash64A (const void * key, uint32_t len, uint64_t seed ){
    const uint64_t m = 0xc6a4a7935bd1e995;
    const int r = 47;
    uint64_t h = seed ^ (len * m);
    const uint64_t * data = (const uint64_t *)key;
    const uint64_t * end = data + (len/8);
    while(data != end)
    {
        uint64_t k = *data++;
        k *= m;
        k ^= k >> r;
        k *= m;

        h ^= k;
        h *= m;
    }
    const unsigned char * data2 = (const unsigned char*)data;
    switch(len & 7){
    case 7: h ^= (uint64_t)(data2[6]) << 48;
    case 6: h ^= (uint64_t)(data2[5]) << 40;
    case 5: h ^= (uint64_t)(data2[4]) << 32;
    case 4: h ^= (uint64_t)(data2[3]) << 24;
    case 3: h ^= (uint64_t)(data2[2]) << 16;
    case 2: h ^= (uint64_t)(data2[1]) << 8;
    case 1: h ^= (uint64_t)(data2[0]);
            h *= m;
    };

    h ^= h >> r;
    h *= m;
    h ^= h >> r;
    
    return h;
}

包装下 MurmurHash64A，使获得的散列值在指定的长度内：

uint64_t hash(const char* data, uint32_t len, uint64_t seed, uint64_t bits) {
    return MurmurHash64A(data, len, seed) % bits;
}

BloomFilter

利用一个结构体存放布隆过滤器的一些设置参数：

typedef struct {
	uint32_t        capacity;     //需要存放的元素个数
    uint32_t        hashes;       //hash 函数的个数
	uint64_t        bits;         //位数组的长度
	float           error;        //误报率
	uint64_t       *seeds;        //hash 函数的seed
} bloomfilterctxt;

bloomfilterctxt 的初始化和释放内存：

void init_bloomfilter(bloomfilterctxt * ctxt, uint32_t capacity, float error, int prime_length) { //prime_length是否将 bits 设置为素数长度
    uint32_t i;

    ctxt->capacity = capacity;
    ctxt->bits     = (uint64_t)(-(log(error) * capacity) / (log(2) * log(2)));
    if (prime_length)
        ctxt->bits = next_prime_number(ctxt->bits);

    ctxt->hashes   = (uint32_t)(ceil(log(2) * ctxt->bits / capacity));
    ctxt->error    = error;
    ctxt->seeds    = (uint64_t *)(malloc(ctxt->hashes * sizeof(uint64_t)));

    uint32_t a = 1664525;
    uint32_t c = 1013904223;
    uint32_t x = 314159265;
    for (i = 0; i < ctxt->hashes; ++i) {
        ctxt->seeds[i] = x;
        x = a * x + c;
    }
}

void free_bloomfilter(bloomfilterctxt * ctxt) {
    if (ctxt->seeds) {
        free(ctxt->seeds);
    }
}
int is_prime_number(uint64_t num){
    if (num == 2) return 1;
    if (num%2 == 0) return 0;
    uint32_t i;
    uint32_t len = (uint32_t)(sqrt((double)num)) + 1;
    for (i = 3; i < len ; i+=2)
        if (num%i == 0)
            return 0;
    return 1;
}

uint64_t next_prime_number(uint64_t num){
    uint64_t i;
    for (i = num; i < 2*num; i++)
        if (is_prime_number(i))
            return i;
    return num;

}

实现插入和查询函数：

void add(char *bitmap, const char *data, uint32_t len, uint64_t *seeds, uint32_t hashes, uint64_t bits){
    uint32_t i;
    uint64_t position;
    for(i=0; i<hashes; i++){
        position = hash(data,len,seeds[i],bits);
        bitmap[position >> SHIFT] |= (1 << (position & MASK));
    }
}

int is_contain(char *bitmap, const char *data, uint32_t len, uint64_t *seeds, uint32_t hashes, uint64_t bits){
    uint32_t i;
    uint64_t position = hash(data,len,seeds[0],bits);
    int result = bitmap[position >> SHIFT] & (1 << (position & MASK));
    for(i=1; i<hashes; i++){
        position = hash(data,len,seeds[i],bits);
        result = result && (bitmap[position >> SHIFT] & (1 << (position & MASK)));
        if(result == 0)
            break;
    }
    return result;
}

//包装一下方便调用
void bf_add(bloomfilterctxt* ctxt, char *bitmap, const char *data, uint32_t len){
    add(bitmap,data, len, ctxt->seeds, ctxt->hashes, ctxt->bits);
}
int bf_is_contain(bloomfilterctxt* ctxt,char *bitmap, const char *data, uint32_t len){
    return is_contain(bitmap,data,len,ctxt->seeds, ctxt->hashes, ctxt->bits);
}

测试一下

main.c函数

bloomfilterctxt ctxt;

    int i;
    //假设每个人推送1000个
    uint32_t capacity = 1000;
    float error = 0.05;
    init_bloomfilter(&ctxt,capacity,error,1);

    char *bitmap = (char*)calloc(ctxt.bits/8+1,sizeof(char));

    char *data1 = "apple";
    bf_add(&ctxt,bitmap,data1,5);

    if(bf_is_contain(&ctxt,bitmap,data1,5))
        printf("%s in bitmap\n",data1);
    else
        printf("%s not in bitmap\n",data1);

    char *data2 = "banana";
    bf_add(&ctxt,bitmap,data1,6);
    if(bf_is_contain(&ctxt,bitmap,data2,6))
        printf("%s in bitmap\n",data2);
    else
        printf("%s not in bitmap\n",data2);

结果：

apple in bitmap
banana not in bitmap

Python包装

首先编辑一个 bloom.pyx 文件, 该文件中有个BloomFilter类，该类实现对相关C函数的调用。bitmap数组由 bytes 函数获的。

cdef extern from "bloomfilter.h":
    ctypedef unsigned long int   uint64_t
    ctypedef unsigned int   uint32_t

    ctypedef struct bloomfilterctxt:
        uint32_t        capacity;
        uint32_t        hashes;
        uint64_t        bits;
        float           error;
        uint64_t       *seeds;

    void clean_bitmap(char *bitmap, uint32_t len)
    void free_bloomfilter(bloomfilterctxt * ctxt)
    void init_bloomfilter(bloomfilterctxt * ctxt, uint32_t capacity, float error,bint prime_length)
    void bf_add(bloomfilterctxt* ctxt,char *bitmap, const char *data, uint32_t len);
    bint bf_is_contain(bloomfilterctxt* ctxt,char *bitmap, const char *data, uint32_t len);
    uint64_t hash(const char* data, uint32_t len, uint64_t seed, uint64_t bits);

cdef class BloomFilter(object):
    cdef bloomfilterctxt context

    property bits:
        def __get__(self):
            return self.context.bits

    property hashes:
        def __get__(self):
            return self.context.hashes
    def __cinit__(self, capacity, error, prime_length = True):
        init_bloomfilter(&self.context,capacity,error,prime_length)

    def __dealloc__(self):
        free_bloomfilter(&self.context)

    def add(self,bitmap,data):
        key = data.encode()
        bf_add(&self.context, bitmap,key,len(key))

    def is_contain(self,bitmap,data):
        key = data.encode()
        return bf_is_contain(&self.context, bitmap,key,len(key))

    def clean_bitmap(self,bitmap):
        clean_bitmap(bitmap, len(bitmap))

    def hash(self,data):
        key = data.encode()
        offset = []
        for i in range(self.hashes):
            seed = self.context.seeds[i]
            offset.append(hash(key,len(key),seed,self.context.bits))
        return offset

包装一个 bloomfilter.py 文件，方便调用。

from BloomFilter import BloomFilter

class LocalBloomFilter():

    def __init__(self,capacity,error,prime_length = True):
        self.bf = BloomFilter(capacity,error,prime_length)
        self.bitmap = bytes(int(self.bf.bits/8)+1)

    def add(self,data):
        if isinstance(data,(list,tuple)):
            for v in data:
                assert isinstance(v,str),'add() arg must be a str or list/tuple of strings'
                self.bf.add(self.bitmap, v)
        else:
            assert isinstance(data, str), 'add() arg must be a str or list/tuple of strings'
            self.bf.add(self.bitmap,data)

    def is_contain(self,data):
        if isinstance(data,(list,tuple)):
            for v in data:
                assert isinstance(v,str),'is_contain() arg must be a str or list/tuple of strings'
            return [self.bf.is_contain(self.bitmap, v) for v in data]
        else:
            assert isinstance(data, str), 'is_contain() arg must be a str or list/tuple of strings'
            return self.bf.is_contain(self.bitmap, data)

    def clean(self):
        self.bf.clean_bitmap(self.bitmap)


class RedisBloomFilter():
    def __init__(self, capacity, error, redis_conn, prime_length=True):
        self.bf = BloomFilter(capacity, error, prime_length)
        self.redis_conn = redis_conn

    def add(self, key, data):
        if isinstance(data, (list, tuple)):
            offset = []
            for v in data:
                assert isinstance(v, str), 'add() arg must be a str or list/tuple of strings'
                offset += self.bf.hash(v)
            with self.redis_conn.pipeline() as pipe:
                for o in offset:
                    pipe.setbit(key,o,1)
                pipe.execute()
        else:
            assert isinstance(data, str), 'add() arg must be a str or list/tuple of strings'
            offset = self.bf.hash(data)
            with self.redis_conn.pipeline() as pipe:
                for o in offset:
                    pipe.setbit(key,o,1)
                pipe.execute()


    def is_contain(self, key, data):
        if isinstance(data, (list, tuple)):
            offset = []
            for v in data:
                assert isinstance(v, str), 'is_contain() arg must be a str or list/tuple of strings'
                offset += self.bf.hash(v)

            with self.redis_conn.pipeline() as pipe:
                for o in offset:
                    pipe.getbit(key, o)
                result_bits = pipe.execute()
                result = []
                for i in range(len(data)):
                    result_bit = result_bits[i*self.bf.hashes:(i+1)*self.bf.hashes]
                    if sum(result_bit) == self.bf.hashes:
                        result.append(True)
                    else:
                        result.append(False)
                return result
        else:
            assert isinstance(data, str), 'is_contain() arg must be a str or list/tuple of strings'
            offset = self.bf.hash(data)
            with self.redis_conn.pipeline() as pipe:
                for o in offset:
                    pipe.getbit(key, o)
                results = pipe.execute()
                if sum(results) == self.bf.hashes:
                    return True
                return False

    def clean(self,key):
        self.redis_conn.delete(key)

setup文件

创建 setup.py 文件安装：

from distutils.core import setup

ext_files = ['bloomfilter.c']

kwargs = {}

from Cython.Distutils import build_ext
from Cython.Distutils import Extension
print('Building from Cython')
ext_files.append('bloom.pyx')
kwargs['cmdclass'] = {'build_ext': build_ext}


ext_modules = [Extension("BloomFilter",ext_files)]

setup(
    name = 'bloomfilter',
    version = '0.0.1',
    author = '*********',
    author_email = '***********',
    license = 'MIT License',
    ext_modules = ext_modules,
    py_modules = ['bloomfilter'],
    classifiers = [
        'Intended Audience :: Developers',
        'License :: OSI Approved :: MIT License',
        'Programming Language :: C',
        'Programming Language :: Cython',
        'Topic :: Software Development :: Libraries :: Python Modules',
        ],
  **kwargs
)

测试

BloomFilter测试

import random
import string
from bloomfilter import BloomFilter

items = []
for i in range(20000):
    random_string = ''.join(random.sample(string.ascii_letters + string.digits, 5))
    items.append(random_string)

bf = BloomFilter(10000,0.05,True)
bitmap = bytes(int(bf.bits/8)+1)

for i in range(10000):
    item = items[i]
    bf.add(bitmap,item)

error = 0
for i in range(10000,20000):
    item = items[i]
    if bf.is_contain(bitmap,item):
        error += 1

print('%s errors in 10000 samples'%error)

LocalBloomFilter测试

from bloomfilter import LocalBloomFilter
lbf = LocalBloomFilter(1000,0.05)
lbf.add(['apple','banana','C','China','china'])
lbf.is_contain(['apple','Python','Cython','China','china'])
lbf.clean()   # set bit array to zero

RedisBloomFilter测试

from bloomfilter import RedisBloomFilter
from redis import StrictRedis
redis_conn = StrictRedis(host = 'localhost',port = 6379, db = 0)
rbf = RedisBloomFilter(1000,0.05,redis_conn)
rbf.add('bloom','Apple')  # arg 1 is key, arg 2 is item
rbf.is_contain('bloom','Apple')

rbf.add('bloom',['apple','China'])
rbf.is_contain('bloom',['apple','china'])