【QT事件】贴代码跟踪QT5.6.3在Windows（VS）平台的事件流程

最新推荐文章于 2023-07-11 18:16:22 发布
最新推荐文章于 2023-07-11 18:16:22 发布
阅读量1.2k 收藏 2
点赞数
分类专栏： QT开发 编程经验 文章标签： QT事件 QEventLoop
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/houwenbin1986/article/details/79078446
版权

一直在使用QT编写程序，却没有对内部逻辑去了解，惭愧！！！

全部贴代码，不要喷我：

//调用QApplication::exec后
/*****************************************************************************
  Main event loop wrappers
 *****************************************************************************/

/*!
    Enters the main event loop and waits until exit() is called.  Returns
    the value that was passed to exit() (which is 0 if exit() is called via
    quit()).

    It is necessary to call this function to start event handling. The
    main event loop receives events from the window system and
    dispatches these to the application widgets.

    To make your application perform idle processing (by executing a
    special function whenever there are no pending events), use a
    QTimer with 0 timeout. More advanced idle processing schemes can
    be achieved using processEvents().

    We recommend that you connect clean-up code to the
    \l{QCoreApplication::}{aboutToQuit()} signal, instead of putting it in
    your application's \c{main()} function because on some platforms the
    exec() call may not return. For example, on Windows
    when the user logs off, the system terminates the process after Qt
    closes all top-level windows. Hence, there is no guarantee that the
    application will have time to exit its event loop and execute code at
    the end of the \c{main()} function after the exec()
    call.

    \sa quit(), exit(), processEvents(), QApplication::exec()
*/
int QCoreApplication::exec()
{
    if (!QCoreApplicationPrivate::checkInstance("exec"))
        return -1;

    QThreadData *threadData = self->d_func()->threadData;
    if (threadData != QThreadData::current()) {
        qWarning("%s::exec: Must be called from the main thread", self->metaObject()->className());
        return -1;
    }
    if (!threadData->eventLoops.isEmpty()) {
        qWarning("QCoreApplication::exec: The event loop is already running");
        return -1;
    }

    threadData->quitNow = false;
    QEventLoop eventLoop;//创建一个事件循环，分发事件
    self->d_func()->in_exec = true;
    self->d_func()->aboutToQuitEmitted = false;
    int returnCode = eventLoop.exec();//执行事件循环
    threadData->quitNow = false;
    if (self) {
        self->d_func()->in_exec = false;
        if (!self->d_func()->aboutToQuitEmitted)
            emit self->aboutToQuit(QPrivateSignal());
        self->d_func()->aboutToQuitEmitted = true;
        sendPostedEvents(0, QEvent::DeferredDelete);
    }

    return returnCode;
}

//QT中的事件循环
/*!
    Enters the main event loop and waits until exit() is called.
    Returns the value that was passed to exit().

    If \a flags are specified, only events of the types allowed by
    the \a flags will be processed.

    It is necessary to call this function to start event handling. The
    main event loop receives events from the window system and
    dispatches these to the application widgets.

    Generally speaking, no user interaction can take place before
    calling exec(). As a special case, modal widgets like QMessageBox
    can be used before calling exec(), because modal widgets
    use their own local event loop.

    To make your application perform idle processing (i.e. executing a
    special function whenever there are no pending events), use a
    QTimer with 0 timeout. More sophisticated idle processing schemes
    can be achieved using processEvents().

    \sa QCoreApplication::quit(), exit(), processEvents()
*/
int QEventLoop::exec(ProcessEventsFlags flags)
{
    Q_D(QEventLoop);
    //we need to protect from race condition with QThread::exit
    QMutexLocker locker(&static_cast<QThreadPrivate *>(QObjectPrivate::get(d->threadData->thread))->mutex);
    if (d->threadData->quitNow)
        return -1;

    if (d->inExec) {
        qWarning("QEventLoop::exec: instance %p has already called exec()", this);
        return -1;
    }

    struct LoopReference {
        QEventLoopPrivate *d;
        QMutexLocker &locker;

        bool exceptionCaught;
        LoopReference(QEventLoopPrivate *d, QMutexLocker &locker) : d(d), locker(locker), exceptionCaught(true)
        {
            d->inExec = true;
            d->exit.storeRelease(false);
            ++d->threadData->loopLevel;
            d->threadData->eventLoops.push(d->q_func());
            locker.unlock();
        }

        ~LoopReference()
        {
            if (exceptionCaught) {
                qWarning("Qt has caught an exception thrown from an event handler. Throwing\n"
                         "exceptions from an event handler is not supported in Qt.\n"
                         "You must not let any exception whatsoever propagate through Qt code.\n"
                         "If that is not possible, in Qt 5 you must at least reimplement\n"
                         "QCoreApplication::notify() and catch all exceptions there.\n");
            }
            locker.relock();
            QEventLoop *eventLoop = d->threadData->eventLoops.pop();
            Q_ASSERT_X(eventLoop == d->q_func(), "QEventLoop::exec()", "internal error");
            Q_UNUSED(eventLoop); // --release warning
            d->inExec = false;
            --d->threadData->loopLevel;
        }
    };
    LoopReference ref(d, locker);

    // remove posted quit events when entering a new event loop
    QCoreApplication *app = QCoreApplication::instance();
    if (app && app->thread() == thread())
        QCoreApplication::removePostedEvents(app, QEvent::Quit);

    while (!d->exit.loadAcquire())//这里死循环，不停的处理事件！！！
        processEvents(flags | WaitForMoreEvents | EventLoopExec);

    ref.exceptionCaught = false;
    return d->returnCode.load();
}

/*!
    Processes pending events that match \a flags until there are no
    more events to process. Returns \c true if pending events were handled;
    otherwise returns \c false.

    This function is especially useful if you have a long running
    operation and want to show its progress without allowing user
    input; i.e. by using the \l ExcludeUserInputEvents flag.

    This function is simply a wrapper for
    QAbstractEventDispatcher::processEvents(). See the documentation
    for that function for details.
*/
bool QEventLoop::processEvents(ProcessEventsFlags flags)//交由线程的分发器处理消息！！！
{
    Q_D(QEventLoop);
    if (!d->threadData->eventDispatcher.load())
        return false;
    return d->threadData->eventDispatcher.load()->processEvents(flags);//分发器处理
}

//消息分发器的实现
bool QWindowsGuiEventDispatcher::processEvents(QEventLoop::ProcessEventsFlags flags)
{
    const QEventLoop::ProcessEventsFlags oldFlags = m_flags;
    m_flags = flags;
    const bool rc = QEventDispatcherWin32::processEvents(flags);
    m_flags = oldFlags;
    return rc;
}

//Win32下消息的分发，可以看出完全就是Win32的PeekMessage和TranslateMessage以及DispatchMessage
bool QEventDispatcherWin32::processEvents(QEventLoop::ProcessEventsFlags flags)
{
    Q_D(QEventDispatcherWin32);

    if (!d->internalHwnd) {
        createInternalHwnd();
        wakeUp(); // trigger a call to sendPostedEvents()
    }

    d->interrupt = false;
    emit awake();

    bool canWait;
    bool retVal = false;
    bool seenWM_QT_SENDPOSTEDEVENTS = false;
    bool needWM_QT_SENDPOSTEDEVENTS = false;
    do {
        DWORD waitRet = 0;
        HANDLE pHandles[MAXIMUM_WAIT_OBJECTS - 1];
        QVarLengthArray<MSG> processedTimers;
        while (!d->interrupt) {
            DWORD nCount = d->winEventNotifierList.count();
            Q_ASSERT(nCount < MAXIMUM_WAIT_OBJECTS - 1);

            MSG msg;
            bool haveMessage;

            if (!(flags & QEventLoop::ExcludeUserInputEvents) && !d->queuedUserInputEvents.isEmpty()) {
                // process queued user input events
                haveMessage = true;
                msg = d->queuedUserInputEvents.takeFirst();
            } else if(!(flags & QEventLoop::ExcludeSocketNotifiers) && !d->queuedSocketEvents.isEmpty()) {
                // process queued socket events
                haveMessage = true;
                msg = d->queuedSocketEvents.takeFirst();
            } else {
                haveMessage = PeekMessage(&msg, 0, 0, 0, PM_REMOVE);
                if (haveMessage) {
                    if ((flags & QEventLoop::ExcludeUserInputEvents)
                        && ((msg.message >= WM_KEYFIRST
                             && msg.message <= WM_KEYLAST)
                            || (msg.message >= WM_MOUSEFIRST
                                && msg.message <= WM_MOUSELAST)
                            || msg.message == WM_MOUSEWHEEL
                            || msg.message == WM_MOUSEHWHEEL
                            || msg.message == WM_TOUCH
#ifndef QT_NO_GESTURES
                            || msg.message == WM_GESTURE
                            || msg.message == WM_GESTURENOTIFY
#endif
                            || msg.message == WM_CLOSE)) {
                        // queue user input events for later processing
                        d->queuedUserInputEvents.append(msg);
                        continue;
                    }
                    if ((flags & QEventLoop::ExcludeSocketNotifiers)
                        && (msg.message == WM_QT_SOCKETNOTIFIER && msg.hwnd == d->internalHwnd)) {
                        // queue socket events for later processing
                        d->queuedSocketEvents.append(msg);
                        continue;
                    }
                }
            }
            if (!haveMessage) {
                // no message - check for signalled objects
                for (int i=0; i<(int)nCount; i++)
                    pHandles[i] = d->winEventNotifierList.at(i)->handle();
                waitRet = MsgWaitForMultipleObjectsEx(nCount, pHandles, 0, QS_ALLINPUT, MWMO_ALERTABLE);
                if ((haveMessage = (waitRet == WAIT_OBJECT_0 + nCount))) {
                    // a new message has arrived, process it
                    continue;
                }
            }
            if (haveMessage) {
                // WinCE doesn't support hooks at all, so we have to call this by hand :(
                if (!d->getMessageHook)
                    (void) qt_GetMessageHook(0, PM_REMOVE, (LPARAM) &msg);

                if (d->internalHwnd == msg.hwnd && msg.message == WM_QT_SENDPOSTEDEVENTS) {
                    if (seenWM_QT_SENDPOSTEDEVENTS) {
                        // when calling processEvents() "manually", we only want to send posted
                        // events once
                        needWM_QT_SENDPOSTEDEVENTS = true;
                        continue;
                    }
                    seenWM_QT_SENDPOSTEDEVENTS = true;
                } else if (msg.message == WM_TIMER) {
                    // avoid live-lock by keeping track of the timers we've already sent
                    bool found = false;
                    for (int i = 0; !found && i < processedTimers.count(); ++i) {
                        const MSG processed = processedTimers.constData()[i];
                        found = (processed.wParam == msg.wParam && processed.hwnd == msg.hwnd && processed.lParam == msg.lParam);
                    }
                    if (found)
                        continue;
                    processedTimers.append(msg);
                } else if (msg.message == WM_QUIT) {
                    if (QCoreApplication::instance())
                        QCoreApplication::instance()->quit();
                    return false;
                }

                if (!filterNativeEvent(QByteArrayLiteral("windows_generic_MSG"), &msg, 0)) {
                    TranslateMessage(&msg);
                    DispatchMessage(&msg);
                }
            } else if (waitRet - WAIT_OBJECT_0 < nCount) {
                d->activateEventNotifier(d->winEventNotifierList.at(waitRet - WAIT_OBJECT_0));
            } else {
                // nothing todo so break
                break;
            }
            retVal = true;
        }

        // still nothing - wait for message or signalled objects
        canWait = (!retVal
                   && !d->interrupt
                   && (flags & QEventLoop::WaitForMoreEvents));
        if (canWait) {
            DWORD nCount = d->winEventNotifierList.count();
            Q_ASSERT(nCount < MAXIMUM_WAIT_OBJECTS - 1);
            for (int i=0; i<(int)nCount; i++)
                pHandles[i] = d->winEventNotifierList.at(i)->handle();

            emit aboutToBlock();
            waitRet = MsgWaitForMultipleObjectsEx(nCount, pHandles, INFINITE, QS_ALLINPUT, MWMO_ALERTABLE | MWMO_INPUTAVAILABLE);
            emit awake();
            if (waitRet - WAIT_OBJECT_0 < nCount) {
                d->activateEventNotifier(d->winEventNotifierList.at(waitRet - WAIT_OBJECT_0));
                retVal = true;
            }
        }
    } while (canWait);

    if (!seenWM_QT_SENDPOSTEDEVENTS && (flags & QEventLoop::EventLoopExec) == 0) {
        // when called "manually", always send posted events
        sendPostedEvents();
    }

    if (needWM_QT_SENDPOSTEDEVENTS)
        PostMessage(d->internalHwnd, WM_QT_SENDPOSTEDEVENTS, 0, 0);

    return retVal;
}

class QEventLoopPrivate : public QObjectPrivate
{
    Q_DECLARE_PUBLIC(QEventLoop)
public:
    inline QEventLoopPrivate()
        : inExec(false)
    {
        returnCode.store(-1);
        exit.store(true);
    }

    QAtomicInt quitLockRef;

    QBasicAtomicInt exit; // bool 原子变量退出消息线程loop
    QBasicAtomicInt returnCode;
    bool inExec;

    void ref()
    {
        quitLockRef.ref();
    }

    void deref()
    {
        if (!quitLockRef.deref() && inExec) {
            qApp->postEvent(q_ptr, new QEvent(QEvent::Quit));
        }
    }
};


typedef QBasicAtomicInteger<int> QBasicAtomicInt;


//以下是QT的原子变量实现方式
/****************************************************************************
**
** Copyright (C) 2011 Thiago Macieira <thiago@kde.org>
** Contact: http://www.qt.io/licensing/
**
** This file is part of the QtCore module of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:LGPL21$
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and The Qt Company. For licensing terms
** and conditions see http://www.qt.io/terms-conditions. For further
** information use the contact form at http://www.qt.io/contact-us.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 2.1 or version 3 as published by the Free
** Software Foundation and appearing in the file LICENSE.LGPLv21 and
** LICENSE.LGPLv3 included in the packaging of this file. Please review the
** following information to ensure the GNU Lesser General Public License
** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** As a special exception, The Qt Company gives you certain additional
** rights. These rights are described in The Qt Company LGPL Exception
** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
**
** $QT_END_LICENSE$
**
****************************************************************************/

#include <QtCore/qatomic.h>

#ifndef QBASICATOMIC_H
#define QBASICATOMIC_H

#if defined(QT_BOOTSTRAPPED)
#  include <QtCore/qatomic_bootstrap.h>

// If C++11 atomics are supported, use them!
#elif defined(Q_COMPILER_ATOMICS) && defined(Q_COMPILER_CONSTEXPR) && !defined(QT_ATOMIC_FORCE_NO_CXX11)
#  include <QtCore/qatomic_cxx11.h>

// The following is used for testing only.
// Note that we don't check the compiler support -- you had better
// know what you're doing if you set it
#elif defined(QT_ATOMIC_FORCE_GCC)
#  include <QtCore/qatomic_gcc.h>

// Compiler dependent implementation
#elif defined(Q_CC_MSVC)
#  include <QtCore/qatomic_msvc.h>

// Processor dependent implementation
#elif defined(Q_PROCESSOR_ARM_V7) && defined(Q_PROCESSOR_ARM_32)
# include "QtCore/qatomic_armv7.h"
#elif defined(Q_PROCESSOR_ARM_V6) && defined(Q_PROCESSOR_ARM_32)
# include "QtCore/qatomic_armv6.h"
#elif defined(Q_PROCESSOR_ARM_V5) && defined(Q_PROCESSOR_ARM_32)
# include "QtCore/qatomic_armv5.h"
#elif defined(Q_PROCESSOR_IA64)
#  include "QtCore/qatomic_ia64.h"
#elif defined(Q_PROCESSOR_X86)
#  include <QtCore/qatomic_x86.h>

// Fallback compiler dependent implementation
#elif defined(Q_CC_GNU)
#  include <QtCore/qatomic_gcc.h>

// Fallback operating system dependent implementation
#elif defined(Q_OS_UNIX)
#  include <QtCore/qatomic_unix.h>

// No fallback
#else
#  error "Qt has not been ported to this platform"
#endif

QT_WARNING_PUSH
QT_WARNING_DISABLE_MSVC(4522)

QT_BEGIN_NAMESPACE

#if 0
// silence syncqt warnings
QT_END_NAMESPACE
#pragma qt_no_master_include
#pragma qt_sync_stop_processing
#endif

// New atomics

#if defined(Q_COMPILER_CONSTEXPR) && defined(Q_COMPILER_DEFAULT_MEMBERS) && defined(Q_COMPILER_DELETE_MEMBERS)
# if defined(Q_CC_CLANG) && Q_CC_CLANG < 303
   /*
      Do not define QT_BASIC_ATOMIC_HAS_CONSTRUCTORS for Clang before version 3.3.
      For details about the bug: see http://llvm.org/bugs/show_bug.cgi?id=12670
    */
# else
#  define QT_BASIC_ATOMIC_HAS_CONSTRUCTORS
# endif
#endif

template <typename T>
class QBasicAtomicInteger
{
public:
    typedef QAtomicOps<T> Ops;
    // static check that this is a valid integer
    Q_STATIC_ASSERT_X(QTypeInfo<T>::isIntegral, "template parameter is not an integral type");
    Q_STATIC_ASSERT_X(QAtomicOpsSupport<sizeof(T)>::IsSupported, "template parameter is an integral of a size not supported on this platform");

    typename Ops::Type _q_value;

    // Everything below is either implemented in ../arch/qatomic_XXX.h or (as fallback) in qgenericatomic.h

    T load() const Q_DECL_NOTHROW { return Ops::load(_q_value); }
    void store(T newValue) Q_DECL_NOTHROW { Ops::store(_q_value, newValue); }

    T loadAcquire() const Q_DECL_NOTHROW { return Ops::loadAcquire(_q_value); }
    void storeRelease(T newValue) Q_DECL_NOTHROW { Ops::storeRelease(_q_value, newValue); }
    operator T() const Q_DECL_NOTHROW { return loadAcquire(); }
    T operator=(T newValue) Q_DECL_NOTHROW { storeRelease(newValue); return newValue; }

    static Q_DECL_CONSTEXPR bool isReferenceCountingNative() Q_DECL_NOTHROW { return Ops::isReferenceCountingNative(); }
    static Q_DECL_CONSTEXPR bool isReferenceCountingWaitFree() Q_DECL_NOTHROW { return Ops::isReferenceCountingWaitFree(); }

    bool ref() Q_DECL_NOTHROW { return Ops::ref(_q_value); }
    bool deref() Q_DECL_NOTHROW { return Ops::deref(_q_value); }

    static Q_DECL_CONSTEXPR bool isTestAndSetNative() Q_DECL_NOTHROW { return Ops::isTestAndSetNative(); }
    static Q_DECL_CONSTEXPR bool isTestAndSetWaitFree() Q_DECL_NOTHROW { return Ops::isTestAndSetWaitFree(); }

    bool testAndSetRelaxed(T expectedValue, T newValue) Q_DECL_NOTHROW
    { return Ops::testAndSetRelaxed(_q_value, expectedValue, newValue); }
    bool testAndSetAcquire(T expectedValue, T newValue) Q_DECL_NOTHROW
    { return Ops::testAndSetAcquire(_q_value, expectedValue, newValue); }
    bool testAndSetRelease(T expectedValue, T newValue) Q_DECL_NOTHROW
    { return Ops::testAndSetRelease(_q_value, expectedValue, newValue); }
    bool testAndSetOrdered(T expectedValue, T newValue) Q_DECL_NOTHROW
    { return Ops::testAndSetOrdered(_q_value, expectedValue, newValue); }

    bool testAndSetRelaxed(T expectedValue, T newValue, T ¤tValue) Q_DECL_NOTHROW
    { return Ops::testAndSetRelaxed(_q_value, expectedValue, newValue, ¤tValue); }
    bool testAndSetAcquire(T expectedValue, T newValue, T ¤tValue) Q_DECL_NOTHROW
    { return Ops::testAndSetAcquire(_q_value, expectedValue, newValue, ¤tValue); }
    bool testAndSetRelease(T expectedValue, T newValue, T ¤tValue) Q_DECL_NOTHROW
    { return Ops::testAndSetRelease(_q_value, expectedValue, newValue, ¤tValue); }
    bool testAndSetOrdered(T expectedValue, T newValue, T ¤tValue) Q_DECL_NOTHROW
    { return Ops::testAndSetOrdered(_q_value, expectedValue, newValue, ¤tValue); }

    static Q_DECL_CONSTEXPR bool isFetchAndStoreNative() Q_DECL_NOTHROW { return Ops::isFetchAndStoreNative(); }
    static Q_DECL_CONSTEXPR bool isFetchAndStoreWaitFree() Q_DECL_NOTHROW { return Ops::isFetchAndStoreWaitFree(); }

    T fetchAndStoreRelaxed(T newValue) Q_DECL_NOTHROW
    { return Ops::fetchAndStoreRelaxed(_q_value, newValue); }
    T fetchAndStoreAcquire(T newValue) Q_DECL_NOTHROW
    { return Ops::fetchAndStoreAcquire(_q_value, newValue); }
    T fetchAndStoreRelease(T newValue) Q_DECL_NOTHROW
    { return Ops::fetchAndStoreRelease(_q_value, newValue); }
    T fetchAndStoreOrdered(T newValue) Q_DECL_NOTHROW
    { return Ops::fetchAndStoreOrdered(_q_value, newValue); }

    static Q_DECL_CONSTEXPR bool isFetchAndAddNative() Q_DECL_NOTHROW { return Ops::isFetchAndAddNative(); }
    static Q_DECL_CONSTEXPR bool isFetchAndAddWaitFree() Q_DECL_NOTHROW { return Ops::isFetchAndAddWaitFree(); }

    T fetchAndAddRelaxed(T valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndAddRelaxed(_q_value, valueToAdd); }
    T fetchAndAddAcquire(T valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndAddAcquire(_q_value, valueToAdd); }
    T fetchAndAddRelease(T valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndAddRelease(_q_value, valueToAdd); }
    T fetchAndAddOrdered(T valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndAddOrdered(_q_value, valueToAdd); }

    T fetchAndSubRelaxed(T valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndSubRelaxed(_q_value, valueToAdd); }
    T fetchAndSubAcquire(T valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndSubAcquire(_q_value, valueToAdd); }
    T fetchAndSubRelease(T valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndSubRelease(_q_value, valueToAdd); }
    T fetchAndSubOrdered(T valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndSubOrdered(_q_value, valueToAdd); }

    T fetchAndAndRelaxed(T valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndAndRelaxed(_q_value, valueToAdd); }
    T fetchAndAndAcquire(T valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndAndAcquire(_q_value, valueToAdd); }
    T fetchAndAndRelease(T valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndAndRelease(_q_value, valueToAdd); }
    T fetchAndAndOrdered(T valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndAndOrdered(_q_value, valueToAdd); }

    T fetchAndOrRelaxed(T valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndOrRelaxed(_q_value, valueToAdd); }
    T fetchAndOrAcquire(T valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndOrAcquire(_q_value, valueToAdd); }
    T fetchAndOrRelease(T valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndOrRelease(_q_value, valueToAdd); }
    T fetchAndOrOrdered(T valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndOrOrdered(_q_value, valueToAdd); }

    T fetchAndXorRelaxed(T valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndXorRelaxed(_q_value, valueToAdd); }
    T fetchAndXorAcquire(T valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndXorAcquire(_q_value, valueToAdd); }
    T fetchAndXorRelease(T valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndXorRelease(_q_value, valueToAdd); }
    T fetchAndXorOrdered(T valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndXorOrdered(_q_value, valueToAdd); }

    T operator++() Q_DECL_NOTHROW
    { return fetchAndAddOrdered(1) + 1; }
    T operator++(int) Q_DECL_NOTHROW
    { return fetchAndAddOrdered(1); }
    T operator--() Q_DECL_NOTHROW
    { return fetchAndSubOrdered(1) - 1; }
    T operator--(int) Q_DECL_NOTHROW
    { return fetchAndSubOrdered(1); }

    T operator+=(T v) Q_DECL_NOTHROW
    { return fetchAndAddOrdered(v) + v; }
    T operator-=(T v) Q_DECL_NOTHROW
    { return fetchAndSubOrdered(v) - v; }
    T operator&=(T v) Q_DECL_NOTHROW
    { return fetchAndAndOrdered(v) & v; }
    T operator|=(T v) Q_DECL_NOTHROW
    { return fetchAndOrOrdered(v) | v; }
    T operator^=(T v) Q_DECL_NOTHROW
    { return fetchAndXorOrdered(v) ^ v; }


#ifdef QT_BASIC_ATOMIC_HAS_CONSTRUCTORS
    QBasicAtomicInteger() = default;
    constexpr QBasicAtomicInteger(T value) Q_DECL_NOTHROW : _q_value(value) {}
    QBasicAtomicInteger(const QBasicAtomicInteger &) = delete;
    QBasicAtomicInteger &operator=(const QBasicAtomicInteger &) = delete;
    QBasicAtomicInteger &operator=(const QBasicAtomicInteger &) volatile = delete;
#endif
};
typedef QBasicAtomicInteger<int> QBasicAtomicInt;

template <typename X>
class QBasicAtomicPointer
{
public:
    typedef X *Type;
    typedef QAtomicOps<Type> Ops;
    typedef typename Ops::Type AtomicType;

    AtomicType _q_value;

    Type load() const Q_DECL_NOTHROW { return Ops::load(_q_value); }
    void store(Type newValue) Q_DECL_NOTHROW { Ops::store(_q_value, newValue); }
    operator Type() const Q_DECL_NOTHROW { return loadAcquire(); }
    Type operator=(Type newValue) Q_DECL_NOTHROW { storeRelease(newValue); return newValue; }

    // Atomic API, implemented in qatomic_XXX.h
    Type loadAcquire() const Q_DECL_NOTHROW { return Ops::loadAcquire(_q_value); }
    void storeRelease(Type newValue) Q_DECL_NOTHROW { Ops::storeRelease(_q_value, newValue); }

    static Q_DECL_CONSTEXPR bool isTestAndSetNative() Q_DECL_NOTHROW { return Ops::isTestAndSetNative(); }
    static Q_DECL_CONSTEXPR bool isTestAndSetWaitFree() Q_DECL_NOTHROW { return Ops::isTestAndSetWaitFree(); }

    bool testAndSetRelaxed(Type expectedValue, Type newValue) Q_DECL_NOTHROW
    { return Ops::testAndSetRelaxed(_q_value, expectedValue, newValue); }
    bool testAndSetAcquire(Type expectedValue, Type newValue) Q_DECL_NOTHROW
    { return Ops::testAndSetAcquire(_q_value, expectedValue, newValue); }
    bool testAndSetRelease(Type expectedValue, Type newValue) Q_DECL_NOTHROW
    { return Ops::testAndSetRelease(_q_value, expectedValue, newValue); }
    bool testAndSetOrdered(Type expectedValue, Type newValue) Q_DECL_NOTHROW
    { return Ops::testAndSetOrdered(_q_value, expectedValue, newValue); }

    bool testAndSetRelaxed(Type expectedValue, Type newValue, Type ¤tValue) Q_DECL_NOTHROW
    { return Ops::testAndSetRelaxed(_q_value, expectedValue, newValue, ¤tValue); }
    bool testAndSetAcquire(Type expectedValue, Type newValue, Type ¤tValue) Q_DECL_NOTHROW
    { return Ops::testAndSetAcquire(_q_value, expectedValue, newValue, ¤tValue); }
    bool testAndSetRelease(Type expectedValue, Type newValue, Type ¤tValue) Q_DECL_NOTHROW
    { return Ops::testAndSetRelease(_q_value, expectedValue, newValue, ¤tValue); }
    bool testAndSetOrdered(Type expectedValue, Type newValue, Type ¤tValue) Q_DECL_NOTHROW
    { return Ops::testAndSetOrdered(_q_value, expectedValue, newValue, ¤tValue); }

    static Q_DECL_CONSTEXPR bool isFetchAndStoreNative() Q_DECL_NOTHROW { return Ops::isFetchAndStoreNative(); }
    static Q_DECL_CONSTEXPR bool isFetchAndStoreWaitFree() Q_DECL_NOTHROW { return Ops::isFetchAndStoreWaitFree(); }

    Type fetchAndStoreRelaxed(Type newValue) Q_DECL_NOTHROW
    { return Ops::fetchAndStoreRelaxed(_q_value, newValue); }
    Type fetchAndStoreAcquire(Type newValue) Q_DECL_NOTHROW
    { return Ops::fetchAndStoreAcquire(_q_value, newValue); }
    Type fetchAndStoreRelease(Type newValue) Q_DECL_NOTHROW
    { return Ops::fetchAndStoreRelease(_q_value, newValue); }
    Type fetchAndStoreOrdered(Type newValue) Q_DECL_NOTHROW
    { return Ops::fetchAndStoreOrdered(_q_value, newValue); }

    static Q_DECL_CONSTEXPR bool isFetchAndAddNative() Q_DECL_NOTHROW { return Ops::isFetchAndAddNative(); }
    static Q_DECL_CONSTEXPR bool isFetchAndAddWaitFree() Q_DECL_NOTHROW { return Ops::isFetchAndAddWaitFree(); }

    Type fetchAndAddRelaxed(qptrdiff valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndAddRelaxed(_q_value, valueToAdd); }
    Type fetchAndAddAcquire(qptrdiff valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndAddAcquire(_q_value, valueToAdd); }
    Type fetchAndAddRelease(qptrdiff valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndAddRelease(_q_value, valueToAdd); }
    Type fetchAndAddOrdered(qptrdiff valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndAddOrdered(_q_value, valueToAdd); }

    Type fetchAndSubRelaxed(qptrdiff valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndSubRelaxed(_q_value, valueToAdd); }
    Type fetchAndSubAcquire(qptrdiff valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndSubAcquire(_q_value, valueToAdd); }
    Type fetchAndSubRelease(qptrdiff valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndSubRelease(_q_value, valueToAdd); }
    Type fetchAndSubOrdered(qptrdiff valueToAdd) Q_DECL_NOTHROW
    { return Ops::fetchAndSubOrdered(_q_value, valueToAdd); }

    Type operator++() Q_DECL_NOTHROW
    { return fetchAndAddOrdered(1) + 1; }
    Type operator++(int) Q_DECL_NOTHROW
    { return fetchAndAddOrdered(1); }
    Type operator--() Q_DECL_NOTHROW
    { return fetchAndSubOrdered(1) - 1; }
    Type operator--(int) Q_DECL_NOTHROW
    { return fetchAndSubOrdered(1); }
    Type operator+=(qptrdiff valueToAdd) Q_DECL_NOTHROW
    { return fetchAndAddOrdered(valueToAdd) + valueToAdd; }
    Type operator-=(qptrdiff valueToSub) Q_DECL_NOTHROW
    { return fetchAndSubOrdered(valueToSub) - valueToSub; }

#ifdef QT_BASIC_ATOMIC_HAS_CONSTRUCTORS
    QBasicAtomicPointer() = default;
    constexpr QBasicAtomicPointer(Type value) Q_DECL_NOTHROW : _q_value(value) {}
    QBasicAtomicPointer(const QBasicAtomicPointer &) = delete;
    QBasicAtomicPointer &operator=(const QBasicAtomicPointer &) = delete;
    QBasicAtomicPointer &operator=(const QBasicAtomicPointer &) volatile = delete;
#endif
};

#ifndef Q_BASIC_ATOMIC_INITIALIZER
#  define Q_BASIC_ATOMIC_INITIALIZER(a) { (a) }
#endif

QT_END_NAMESPACE

QT_WARNING_POP

#endif // QBASICATOMIC_H


//以下是QT针对于MSVC实现的原子变量，位于qtbase\src\corelib\arch
/****************************************************************************
**
** Copyright (C) 2015 The Qt Company Ltd.
** Contact: http://www.qt.io/licensing/
**
** This file is part of the QtCore module of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:LGPL21$
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and The Qt Company. For licensing terms
** and conditions see http://www.qt.io/terms-conditions. For further
** information use the contact form at http://www.qt.io/contact-us.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 2.1 or version 3 as published by the Free
** Software Foundation and appearing in the file LICENSE.LGPLv21 and
** LICENSE.LGPLv3 included in the packaging of this file. Please review the
** following information to ensure the GNU Lesser General Public License
** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** As a special exception, The Qt Company gives you certain additional
** rights. These rights are described in The Qt Company LGPL Exception
** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
**
** $QT_END_LICENSE$
**
****************************************************************************/

#ifndef QATOMIC_MSVC_H
#define QATOMIC_MSVC_H

#include <QtCore/qgenericatomic.h>



#ifndef Q_OS_WINCE

// use compiler intrinsics for all atomic functions
# define QT_INTERLOCKED_PREFIX _
# define QT_INTERLOCKED_PROTOTYPE
# define QT_INTERLOCKED_DECLARE_PROTOTYPES
# define QT_INTERLOCKED_INTRINSIC
# define Q_ATOMIC_INT16_IS_SUPPORTED

# ifdef _WIN64
#  define Q_ATOMIC_INT64_IS_SUPPORTED
# endif

#else // Q_OS_WINCE

# if _WIN32_WCE < 0x600 && defined(_X86_)
// For X86 Windows CE, include winbase.h to catch inline functions which
// override the regular definitions inside of coredll.dll.
// Though one could use the original version of Increment/Decrement, others are
// not exported at all.
#  include <winbase.h>

// It's safer to remove the volatile and let the compiler add it as needed.
#  define QT_INTERLOCKED_VOLATILE

# else // _WIN32_WCE >= 0x600 || !_X86_

#  define QT_INTERLOCKED_PROTOTYPE __cdecl
#  define QT_INTERLOCKED_DECLARE_PROTOTYPES

#  if _WIN32_WCE >= 0x600
#   if defined(_X86_)
#    define QT_INTERLOCKED_PREFIX _
#    define QT_INTERLOCKED_INTRINSIC
#   endif
#  else
#   define QT_INTERLOCKED_VOLATILE
#  endif

# endif // _WIN32_WCE >= 0x600 || !_X86_

#endif // Q_OS_WINCE


// Prototype declaration

#define QT_INTERLOCKED_CONCAT_I(prefix, suffix) \
    prefix ## suffix
#define QT_INTERLOCKED_CONCAT(prefix, suffix) \
    QT_INTERLOCKED_CONCAT_I(prefix, suffix)

// MSVC intrinsics prefix function names with an underscore. Also, if platform
// SDK headers have been included, the Interlocked names may be defined as
// macros.
// To avoid double underscores, we paste the prefix with Interlocked first and
// then the remainder of the function name.
#define QT_INTERLOCKED_FUNCTION(name) \
    QT_INTERLOCKED_CONCAT( \
        QT_INTERLOCKED_CONCAT(QT_INTERLOCKED_PREFIX, Interlocked), name)

#ifndef QT_INTERLOCKED_VOLATILE
# define QT_INTERLOCKED_VOLATILE volatile
#endif

#ifndef QT_INTERLOCKED_PREFIX
#define QT_INTERLOCKED_PREFIX
#endif

#ifndef QT_INTERLOCKED_PROTOTYPE
#define QT_INTERLOCKED_PROTOTYPE
#endif

#ifdef QT_INTERLOCKED_DECLARE_PROTOTYPES
#undef QT_INTERLOCKED_DECLARE_PROTOTYPES

extern "C" {

    long QT_INTERLOCKED_PROTOTYPE QT_INTERLOCKED_FUNCTION( Increment )(long QT_INTERLOCKED_VOLATILE *);
    long QT_INTERLOCKED_PROTOTYPE QT_INTERLOCKED_FUNCTION( Decrement )(long QT_INTERLOCKED_VOLATILE *);
    long QT_INTERLOCKED_PROTOTYPE QT_INTERLOCKED_FUNCTION( CompareExchange )(long QT_INTERLOCKED_VOLATILE *, long, long);
    long QT_INTERLOCKED_PROTOTYPE QT_INTERLOCKED_FUNCTION( Exchange )(long QT_INTERLOCKED_VOLATILE *, long);
    long QT_INTERLOCKED_PROTOTYPE QT_INTERLOCKED_FUNCTION( ExchangeAdd )(long QT_INTERLOCKED_VOLATILE *, long);

# if !defined(Q_OS_WINCE) && !defined(__i386__) && !defined(_M_IX86)
    void * QT_INTERLOCKED_FUNCTION( CompareExchangePointer )(void * QT_INTERLOCKED_VOLATILE *, void *, void *);
    void * QT_INTERLOCKED_FUNCTION( ExchangePointer )(void * QT_INTERLOCKED_VOLATILE *, void *);
    __int64 QT_INTERLOCKED_FUNCTION( ExchangeAdd64 )(__int64 QT_INTERLOCKED_VOLATILE *, __int64);
# endif

# ifdef Q_ATOMIC_INT16_IS_SUPPORTED
    short QT_INTERLOCKED_PROTOTYPE QT_INTERLOCKED_FUNCTION( Increment16 )(short QT_INTERLOCKED_VOLATILE *);
    short QT_INTERLOCKED_PROTOTYPE QT_INTERLOCKED_FUNCTION( Decrement16 )(short QT_INTERLOCKED_VOLATILE *);
    short QT_INTERLOCKED_PROTOTYPE QT_INTERLOCKED_FUNCTION( CompareExchange16 )(short QT_INTERLOCKED_VOLATILE *, short, short);
    short QT_INTERLOCKED_PROTOTYPE QT_INTERLOCKED_FUNCTION( Exchange16 )(short QT_INTERLOCKED_VOLATILE *, short);
    short QT_INTERLOCKED_PROTOTYPE QT_INTERLOCKED_FUNCTION( ExchangeAdd16 )(short QT_INTERLOCKED_VOLATILE *, short);
# endif
# ifdef Q_ATOMIC_INT64_IS_SUPPORTED
    __int64 QT_INTERLOCKED_PROTOTYPE QT_INTERLOCKED_FUNCTION( Increment64 )(__int64 QT_INTERLOCKED_VOLATILE *);
    __int64 QT_INTERLOCKED_PROTOTYPE QT_INTERLOCKED_FUNCTION( Decrement64 )(__int64 QT_INTERLOCKED_VOLATILE *);
    __int64 QT_INTERLOCKED_PROTOTYPE QT_INTERLOCKED_FUNCTION( CompareExchange64 )(__int64 QT_INTERLOCKED_VOLATILE *, __int64, __int64);
    __int64 QT_INTERLOCKED_PROTOTYPE QT_INTERLOCKED_FUNCTION( Exchange64 )(__int64 QT_INTERLOCKED_VOLATILE *, __int64);
    //above already: qint64 QT_INTERLOCKED_PROTOTYPE QT_INTERLOCKED_FUNCTION( ExchangeAdd64 )(qint64 QT_INTERLOCKED_VOLATILE *, qint64);
# endif
}

#endif // QT_INTERLOCKED_DECLARE_PROTOTYPES

#undef QT_INTERLOCKED_PROTOTYPE



#ifdef QT_INTERLOCKED_INTRINSIC
#undef QT_INTERLOCKED_INTRINSIC

# pragma intrinsic (_InterlockedIncrement)
# pragma intrinsic (_InterlockedDecrement)
# pragma intrinsic (_InterlockedExchange)
# pragma intrinsic (_InterlockedCompareExchange)
# pragma intrinsic (_InterlockedExchangeAdd)

# if !defined(Q_OS_WINCE) && !defined(_M_IX86)
#  pragma intrinsic (_InterlockedCompareExchangePointer)
#  pragma intrinsic (_InterlockedExchangePointer)
#  pragma intrinsic (_InterlockedExchangeAdd64)
# endif

#endif // QT_INTERLOCKED_INTRINSIC


// Interlocked* replacement macros

#if defined(Q_OS_WINCE) || defined(__i386__) || defined(_M_IX86)

# define QT_INTERLOCKED_COMPARE_EXCHANGE_POINTER(value, newValue, expectedValue) \
    reinterpret_cast<void *>( \
        QT_INTERLOCKED_FUNCTION(CompareExchange)( \
                reinterpret_cast<long QT_INTERLOCKED_VOLATILE *>(value), \
                long(newValue), \
                long(expectedValue)))

# define QT_INTERLOCKED_EXCHANGE_POINTER(value, newValue) \
    QT_INTERLOCKED_FUNCTION(Exchange)( \
            reinterpret_cast<long QT_INTERLOCKED_VOLATILE *>(value), \
            long(newValue))

# define QT_INTERLOCKED_EXCHANGE_ADD_POINTER(value, valueToAdd) \
    QT_INTERLOCKED_FUNCTION(ExchangeAdd)( \
            reinterpret_cast<long QT_INTERLOCKED_VOLATILE *>(value), \
            (valueToAdd))

#else // !defined(Q_OS_WINCE) && !defined(__i386__) && !defined(_M_IX86)

# define QT_INTERLOCKED_COMPARE_EXCHANGE_POINTER(value, newValue, expectedValue) \
    QT_INTERLOCKED_FUNCTION(CompareExchangePointer)( \
            (void * QT_INTERLOCKED_VOLATILE *)(value), \
            (void *) (newValue), \
            (void *) (expectedValue))

# define QT_INTERLOCKED_EXCHANGE_POINTER(value, newValue) \
    QT_INTERLOCKED_FUNCTION(ExchangePointer)( \
            (void * QT_INTERLOCKED_VOLATILE *)(value), \
            (void *) (newValue))

# define QT_INTERLOCKED_EXCHANGE_ADD_POINTER(value, valueToAdd) \
    QT_INTERLOCKED_FUNCTION(ExchangeAdd64)( \
            reinterpret_cast<qint64 QT_INTERLOCKED_VOLATILE *>(value), \
            (valueToAdd))

#endif // !defined(Q_OS_WINCE) && !defined(__i386__) && !defined(_M_IX86)



QT_BEGIN_NAMESPACE

#if 0
// silence syncqt warnings
QT_END_NAMESPACE
#pragma qt_sync_skip_header_check
#pragma qt_sync_stop_processing
#endif

#define Q_ATOMIC_INT_REFERENCE_COUNTING_IS_ALWAYS_NATIVE
#define Q_ATOMIC_INT_REFERENCE_COUNTING_IS_WAIT_FREE

#define Q_ATOMIC_INT_TEST_AND_SET_IS_ALWAYS_NATIVE
#define Q_ATOMIC_INT_TEST_AND_SET_IS_WAIT_FREE

#define Q_ATOMIC_INT_FETCH_AND_STORE_IS_ALWAYS_NATIVE
#define Q_ATOMIC_INT_FETCH_AND_STORE_IS_WAIT_FREE

#define Q_ATOMIC_INT_FETCH_AND_ADD_IS_ALWAYS_NATIVE
#define Q_ATOMIC_INT_FETCH_AND_ADD_IS_WAIT_FREE

#define Q_ATOMIC_INT32_IS_SUPPORTED

#define Q_ATOMIC_INT32_REFERENCE_COUNTING_IS_ALWAYS_NATIVE
#define Q_ATOMIC_INT32_REFERENCE_COUNTING_IS_WAIT_FREE

#define Q_ATOMIC_INT32_TEST_AND_SET_IS_ALWAYS_NATIVE
#define Q_ATOMIC_INT32_TEST_AND_SET_IS_WAIT_FREE

#define Q_ATOMIC_INT32_FETCH_AND_STORE_IS_ALWAYS_NATIVE
#define Q_ATOMIC_INT32_FETCH_AND_STORE_IS_WAIT_FREE

#define Q_ATOMIC_INT32_FETCH_AND_ADD_IS_ALWAYS_NATIVE
#define Q_ATOMIC_INT32_FETCH_AND_ADD_IS_WAIT_FREE

#define Q_ATOMIC_POINTER_TEST_AND_SET_IS_ALWAYS_NATIVE
#define Q_ATOMIC_POINTER_TEST_AND_SET_IS_WAIT_FREE

#define Q_ATOMIC_POINTER_FETCH_AND_STORE_IS_ALWAYS_NATIVE
#define Q_ATOMIC_POINTER_FETCH_AND_STORE_IS_WAIT_FREE

#define Q_ATOMIC_POINTER_FETCH_AND_ADD_IS_ALWAYS_NATIVE
#define Q_ATOMIC_POINTER_FETCH_AND_ADD_IS_WAIT_FREE

#ifdef Q_ATOMIC_INT16_IS_SUPPORTED
# define Q_ATOMIC_INT16_REFERENCE_COUNTING_IS_ALWAYS_NATIVE
# define Q_ATOMIC_INT16_REFERENCE_COUNTING_IS_WAIT_FREE

# define Q_ATOMIC_INT16_TEST_AND_SET_IS_ALWAYS_NATIVE
# define Q_ATOMIC_INT16_TEST_AND_SET_IS_WAIT_FREE

# define Q_ATOMIC_INT16_FETCH_AND_STORE_IS_ALWAYS_NATIVE
# define Q_ATOMIC_INT16_FETCH_AND_STORE_IS_WAIT_FREE

# define Q_ATOMIC_INT16_FETCH_AND_ADD_IS_ALWAYS_NATIVE
# define Q_ATOMIC_INT16_FETCH_AND_ADD_IS_WAIT_FREE

template<> struct QAtomicOpsSupport<2> { enum { IsSupported = 1 }; };
#endif

#ifdef Q_ATOMIC_INT64_IS_SUPPORTED
# define Q_ATOMIC_INT64_REFERENCE_COUNTING_IS_ALWAYS_NATIVE
# define Q_ATOMIC_INT64_REFERENCE_COUNTING_IS_WAIT_FREE

# define Q_ATOMIC_INT64_TEST_AND_SET_IS_ALWAYS_NATIVE
# define Q_ATOMIC_INT64_TEST_AND_SET_IS_WAIT_FREE

# define Q_ATOMIC_INT64_FETCH_AND_STORE_IS_ALWAYS_NATIVE
# define Q_ATOMIC_INT64_FETCH_AND_STORE_IS_WAIT_FREE

# define Q_ATOMIC_INT64_FETCH_AND_ADD_IS_ALWAYS_NATIVE
# define Q_ATOMIC_INT64_FETCH_AND_ADD_IS_WAIT_FREE

template<> struct QAtomicOpsSupport<8> { enum { IsSupported = 1 }; };
#endif



template <int N> struct QAtomicWindowsType { typedef typename QIntegerForSize<N>::Signed Type; };
template <> struct QAtomicWindowsType<4> { typedef long Type; };


template <int N> struct QAtomicOpsBySize : QGenericAtomicOps<QAtomicOpsBySize<N> >
{
    static inline Q_DECL_CONSTEXPR bool isReferenceCountingNative() Q_DECL_NOTHROW { return true; }
    static inline Q_DECL_CONSTEXPR bool isReferenceCountingWaitFree() Q_DECL_NOTHROW { return true; }
    template <typename T> static bool ref(T &_q_value) Q_DECL_NOTHROW;
    template <typename T> static bool deref(T &_q_value) Q_DECL_NOTHROW;

    static inline Q_DECL_CONSTEXPR bool isTestAndSetNative() Q_DECL_NOTHROW { return true; }
    static inline Q_DECL_CONSTEXPR bool isTestAndSetWaitFree() Q_DECL_NOTHROW { return true; }
    template <typename T> static bool testAndSetRelaxed(T &_q_value, T expectedValue, T newValue) Q_DECL_NOTHROW;
    template <typename T>
    static bool testAndSetRelaxed(T &_q_value, T expectedValue, T newValue, T *currentValue) Q_DECL_NOTHROW;

    static inline Q_DECL_CONSTEXPR bool isFetchAndStoreNative() Q_DECL_NOTHROW { return true; }
    static inline Q_DECL_CONSTEXPR bool isFetchAndStoreWaitFree() Q_DECL_NOTHROW { return true; }
    template <typename T> static T fetchAndStoreRelaxed(T &_q_value, T newValue) Q_DECL_NOTHROW;

    static inline Q_DECL_CONSTEXPR bool isFetchAndAddNative() Q_DECL_NOTHROW { return true; }
    static inline Q_DECL_CONSTEXPR bool isFetchAndAddWaitFree() Q_DECL_NOTHROW { return true; }
    template <typename T> static T fetchAndAddRelaxed(T &_q_value, typename QAtomicAdditiveType<T>::AdditiveT valueToAdd) Q_DECL_NOTHROW;

private:
    typedef typename QAtomicWindowsType<N>::Type Type;
    template <typename T> static inline Type *atomic(T *t)
    { Q_STATIC_ASSERT(sizeof(T) == sizeof(Type)); return reinterpret_cast<Type *>(t); }
    template <typename T> static inline Type value(T t)
    { Q_STATIC_ASSERT(sizeof(T) == sizeof(Type)); return Type(t); }
};

template <typename T>
struct QAtomicOps : QAtomicOpsBySize<sizeof(T)>
{
    typedef T Type;
};

template<> template<typename T>
inline bool QAtomicOpsBySize<4>::ref(T &_q_value) Q_DECL_NOTHROW
{
    return QT_INTERLOCKED_FUNCTION(Increment)(atomic(&_q_value)) != 0;
}

template<> template<typename T>
inline bool QAtomicOpsBySize<4>::deref(T &_q_value) Q_DECL_NOTHROW
{
    return QT_INTERLOCKED_FUNCTION(Decrement)(atomic(&_q_value)) != 0;
}

template<> template<typename T>
inline bool QAtomicOpsBySize<4>::testAndSetRelaxed(T &_q_value, T expectedValue, T newValue) Q_DECL_NOTHROW
{
    return QT_INTERLOCKED_FUNCTION(CompareExchange)(atomic(&_q_value), value(newValue), value(expectedValue)) == value(expectedValue);
}

template<> template <typename T>
inline bool QAtomicOpsBySize<4>::testAndSetRelaxed(T &_q_value, T expectedValue, T newValue, T *currentValue) Q_DECL_NOTHROW
{
    *currentValue = T(QT_INTERLOCKED_FUNCTION(CompareExchange)(atomic(&_q_value), newValue, expectedValue));
    return *currentValue == expectedValue;
}

template<> template<typename T>
inline T QAtomicOpsBySize<4>::fetchAndStoreRelaxed(T &_q_value, T newValue) Q_DECL_NOTHROW
{
    return QT_INTERLOCKED_FUNCTION(Exchange)(atomic(&_q_value), value(newValue));
}

template<> template<typename T>
inline T QAtomicOpsBySize<4>::fetchAndAddRelaxed(T &_q_value, typename QAtomicAdditiveType<T>::AdditiveT valueToAdd) Q_DECL_NOTHROW
{
    return QT_INTERLOCKED_FUNCTION(ExchangeAdd)(atomic(&_q_value), value<T>(valueToAdd * QAtomicAdditiveType<T>::AddScale));
}

#ifdef Q_ATOMIC_INT16_IS_SUPPORTED
template<> template<typename T>
inline bool QAtomicOpsBySize<2>::ref(T &_q_value) Q_DECL_NOTHROW
{
    return QT_INTERLOCKED_FUNCTION(Increment16)(atomic(&_q_value)) != 0;
}

template<> template<typename T>
inline bool QAtomicOpsBySize<2>::deref(T &_q_value) Q_DECL_NOTHROW
{
    return QT_INTERLOCKED_FUNCTION(Decrement16)(atomic(&_q_value)) != 0;
}

template<> template<typename T>
inline bool QAtomicOpsBySize<2>::testAndSetRelaxed(T &_q_value, T expectedValue, T newValue) Q_DECL_NOTHROW
{
    return QT_INTERLOCKED_FUNCTION(CompareExchange16)(atomic(&_q_value), value(newValue), value(expectedValue)) == value(expectedValue);
}

template<> template <typename T>
inline bool QAtomicOpsBySize<2>::testAndSetRelaxed(T &_q_value, T expectedValue, T newValue, T *currentValue) Q_DECL_NOTHROW
{
    *currentValue = T(QT_INTERLOCKED_FUNCTION(CompareExchange16)(atomic(&_q_value), newValue, expectedValue));
    return *currentValue == expectedValue;
}

template<> template<typename T>
inline T QAtomicOpsBySize<2>::fetchAndStoreRelaxed(T &_q_value, T newValue) Q_DECL_NOTHROW
{
    return QT_INTERLOCKED_FUNCTION(Exchange16)(atomic(&_q_value), value(newValue));
}

template<> template<typename T>
inline T QAtomicOpsBySize<2>::fetchAndAddRelaxed(T &_q_value, typename QAtomicAdditiveType<T>::AdditiveT valueToAdd) Q_DECL_NOTHROW
{
    return QT_INTERLOCKED_FUNCTION(ExchangeAdd16)(atomic(&_q_value), value<T>(valueToAdd * QAtomicAdditiveType<T>::AddScale));
}
#endif

#ifdef Q_ATOMIC_INT64_IS_SUPPORTED
template<> template<typename T>
inline bool QAtomicOpsBySize<8>::ref(T &_q_value) Q_DECL_NOTHROW
{
    return QT_INTERLOCKED_FUNCTION(Increment64)(atomic(&_q_value)) != 0;
}

template<> template<typename T>
inline bool QAtomicOpsBySize<8>::deref(T &_q_value) Q_DECL_NOTHROW
{
    return QT_INTERLOCKED_FUNCTION(Decrement64)(atomic(&_q_value)) != 0;
}

template<> template<typename T>
inline bool QAtomicOpsBySize<8>::testAndSetRelaxed(T &_q_value, T expectedValue, T newValue) Q_DECL_NOTHROW
{
    return QT_INTERLOCKED_FUNCTION(CompareExchange64)(atomic(&_q_value), value(newValue), value(expectedValue)) == value(expectedValue);
}

template<> template <typename T>
inline bool QAtomicOpsBySize<8>::testAndSetRelaxed(T &_q_value, T expectedValue, T newValue, T *currentValue) Q_DECL_NOTHROW
{
    *currentValue = T(QT_INTERLOCKED_FUNCTION(CompareExchange64)(atomic(&_q_value), newValue, expectedValue));
    return *currentValue == expectedValue;
}

template<> template<typename T>
inline T QAtomicOpsBySize<8>::fetchAndStoreRelaxed(T &_q_value, T newValue) Q_DECL_NOTHROW
{
    return QT_INTERLOCKED_FUNCTION(Exchange64)(atomic(&_q_value), value(newValue));
}

template<> template<typename T>
inline T QAtomicOpsBySize<8>::fetchAndAddRelaxed(T &_q_value, typename QAtomicAdditiveType<T>::AdditiveT valueToAdd) Q_DECL_NOTHROW
{
    return QT_INTERLOCKED_FUNCTION(ExchangeAdd64)(atomic(&_q_value), value<T>(valueToAdd * QAtomicAdditiveType<T>::AddScale));
}
#endif

// Specialization for pointer types, since we have Interlocked*Pointer() variants in some configurations
template <typename T>
struct QAtomicOps<T *> : QGenericAtomicOps<QAtomicOps<T *> >
{
    typedef T *Type;

    static inline Q_DECL_CONSTEXPR bool isTestAndSetNative() Q_DECL_NOTHROW { return true; }
    static inline Q_DECL_CONSTEXPR bool isTestAndSetWaitFree() Q_DECL_NOTHROW { return true; }
    static bool testAndSetRelaxed(T *&_q_value, T *expectedValue, T *newValue) Q_DECL_NOTHROW;
    static bool testAndSetRelaxed(T *&_q_value, T *expectedValue, T *newValue, T **currentValue) Q_DECL_NOTHROW;

    static inline Q_DECL_CONSTEXPR bool isFetchAndStoreNative() Q_DECL_NOTHROW { return true; }
    static inline Q_DECL_CONSTEXPR bool isFetchAndStoreWaitFree() Q_DECL_NOTHROW { return true; }
    static T *fetchAndStoreRelaxed(T *&_q_value, T *newValue) Q_DECL_NOTHROW;

    static inline Q_DECL_CONSTEXPR bool isFetchAndAddNative() Q_DECL_NOTHROW { return true; }
    static inline Q_DECL_CONSTEXPR bool isFetchAndAddWaitFree() Q_DECL_NOTHROW { return true; }
    static T *fetchAndAddRelaxed(T *&_q_value, qptrdiff valueToAdd) Q_DECL_NOTHROW;
};

template <typename T>
inline bool QAtomicOps<T *>::testAndSetRelaxed(T *&_q_value, T *expectedValue, T *newValue) Q_DECL_NOTHROW
{
    return QT_INTERLOCKED_COMPARE_EXCHANGE_POINTER(&_q_value, newValue, expectedValue) == expectedValue;
}

template <typename T>
inline bool QAtomicOps<T *>::testAndSetRelaxed(T *&_q_value, T *expectedValue, T *newValue, T **currentValue) Q_DECL_NOTHROW
{
    *currentValue = reinterpret_cast<T *>(QT_INTERLOCKED_COMPARE_EXCHANGE_POINTER(&_q_value, newValue, expectedValue));
    return *currentValue == expectedValue;
}

template <typename T>
inline T *QAtomicOps<T *>::fetchAndStoreRelaxed(T *&_q_value, T *newValue) Q_DECL_NOTHROW
{
    return reinterpret_cast<T *>(QT_INTERLOCKED_EXCHANGE_POINTER(&_q_value, newValue));
}

template <typename T>
inline T *QAtomicOps<T *>::fetchAndAddRelaxed(T *&_q_value, qptrdiff valueToAdd) Q_DECL_NOTHROW
{
    return reinterpret_cast<T *>(QT_INTERLOCKED_EXCHANGE_ADD_POINTER(&_q_value, valueToAdd * sizeof(T)));
}


// Cleanup

#undef QT_INTERLOCKED_CONCAT_I
#undef QT_INTERLOCKED_CONCAT
#undef QT_INTERLOCKED_FUNCTION
#undef QT_INTERLOCKED_PREFIX

#undef QT_INTERLOCKED_VOLATILE

#undef QT_INTERLOCKED_INCREMENT
#undef QT_INTERLOCKED_DECREMENT
#undef QT_INTERLOCKED_COMPARE_EXCHANGE
#undef QT_INTERLOCKED_EXCHANGE
#undef QT_INTERLOCKED_EXCHANGE_ADD
#undef QT_INTERLOCKED_COMPARE_EXCHANGE_POINTER
#undef QT_INTERLOCKED_EXCHANGE_POINTER
#undef QT_INTERLOCKED_EXCHANGE_ADD_POINTER

QT_END_NAMESPACE
#endif // QATOMIC_MSVC_H

一代程序码农
关注
  • 0
    点赞
  • 踩
  • 2
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
专栏目录
ubuntu qt提示QMYSQL driver not loaded 的解决方法不用重新编译
09-20
qt编译连接MYSQL出现QMYSQL driver not loaded 基本成为普遍现象，网络上大多数解决方案是重新编译驱动，亲身证实是可行方案之一。这里给出更简单的办法，适用于ubuntu，直接安装该deb包，就可以了。ubuntu16.04和ubuntu18.04下亲测通过。其余环境未试，请先执行ldd libqsqlmysql.so命令查看是否是libmysqlclient_r.so.18 => not found，是则可以用本安装包，不是的话就不一定适用。
【QT】编译安装Qt5.15.6 过程中遇到的问题处理集
Adimecoin的博客
10-28 5021
硬件：Jetson Xavier NX 套件 系统：Ubuntu 20.4 软件 ：QT5.15.6 问题0：configure 提示 QtWebEngine will not be built（不编译） 0.0、完全信息 0.1、分析 查看配置输出信息发现必要的 “qpa-xcb” 库未发现，而前面提示要求的“xkbfile ”库的状态是“no” 问题1：编译qtlocation时make 被中断，提示/usr/bin/ld: cannot find -lqt_clip2tri、-lqt_poly2t
编译中遇到的include一个问题
m0_37707891的博客
05-31 386
编译文件a.c时，提示：      undefined reference to `xxx-func`xxx-func 定义在b.c中，且在b.h中extern声明了。且a.c中也include了b.h.最后是怎么解决的呢：调整了下a.c中include们的位置，把include "b.h"向上调了几行越过了几个其他的include。然后就顺利编译通过了。...
【Qt】VS2013+QT5.6.3环境搭建
sunriver2000的专栏
07-11 1572
略。
vs2013 qt5.6.3安装
qq_15585645的博客
04-11 2503
一、工具资料： 1.vs2013专业版地址：http://download.csdn.net/download/u010368556/10238145 2.qt各版本地址：http://download.qt.io/archive/qt/ 3.qt-vs插件地址：http://download.qt.io/archive/vsaddin/ 二、环境搭建过程： 1.先安装vs2013专业版（安装过程...
Qt5.6.3的windows minGW版本静态编译的方法
08-08
Qt官方开发工具只提供了动态编译版本，生成的dll文件比较多，程序占用空间也比较大，而利用静态库进行编译就可以编译出...所以我在此分享一下Qt5.6.3在windows下编译静态库的方法，并介绍了静态库在Qt中的使用方法。
Qt5.6.3源代码 qt-everywhere-opensource-src-5.6.3
06-27
qt-everywhere-opensource-src-5.6.3 用于手工编绎用的。
Qt5.6.3+VS2013环境搭建教程（最后支持XP系统的Qt版本）
04-07
Qt5.6.3+VS2013+扩展
qtwebkit-opensource-src-5.6.3源码，可以在windows、linnux用qt编译安装
最新发布
11-17
qtwebkit-opensource-src-5.6.3源码，可以在windows、linnux用qt编译安装
qt-opensource-windows-x86-msvc2010-5.6.3.exe
06-27
qt-opensource-windows-x86-msvc2010-5.6.3.exe
VS2015+qt5.6.3-webkit
07-05
使用的编译环境MSVC-2015+perl+ruby+python，编译了整整一天才编译出来的5.6.3版本的qtwebkit,由于qt5.6以上的版本不在支持webkit，但是webengin在windowsxp上面不再支持，编译选型特地的选可以支持windowsxp。...
Qt 5.6.3 for vs2012 动态库
06-29
Qt 5.6.3 for vs2012 动态库 在vc2012中使用的动态库，完整文件包。 编绎时用到的命令行： configure -prefix d:\win32-msvc2012 -platform win32-msvc2012 -opensource -confirm-license -nomake tests -nomake ...
Qt5.6.3 C++静态编译 vs2015
03-01
由于受上传文件大小的限制，里面只包含所需的头文件和lib文件，有问题可留言，亲测可用
qt-opensource-windows-x86-msvc2013-5.6.3
01-18
qt5.6.3 相关资源包适用于 vs2013
Qt5.6.3 for vs2017 动态编绎版本
11-12
Qt5.6.3 for vs2017 动态编绎版本 这个用于vc2017中的调用。 我的备忘说明： https://blog.csdn.net/aasmfox/article/details/125140167
vs2013+qt5.6.3+openGl.zip
01-19
在vs2013中使用QT中自带的OpenGL绘制一个简单的图形
qt-opensource-windows-x86-msvc2012-5.6.3.exe
06-29
qt-opensource-windows-x86-msvc2012-5.6.3 这个是在vs2012中的使用的qt 编绎时使用的命令: configure -prefix d:\win32-msvc2012 -platform win32-msvc2012 -opensource -confirm-license -nomake tests -nomake ...
中标麒麟Linux64平台上可以安装的Qt5.6.3包
09-28
中标麒麟Linux64平台上可以安装的Qt5.6.3包
qt5.6.3windows
07-09
Qt 5.6.3是一种跨平台的应用程序开发框架，可在Windows操作系统上使用。它提供了丰富的工具和库，以帮助开发者快速创建高质量的应用程序。 Qt 5.6.3具有许多令人激动的功能和改进，使得在Windows上开发应用程序更加...

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值