厂级MES

于 2021-07-24 13:24:52 发布
阅读量177 收藏
点赞数
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/huanglianggu/article/details/119056983
版权

厂级MES对接

1.涂胶

http://172.17.50.36:8088/mes-edi/packPackageService/packgluing/

{
	"cmd": "put",
	"data": {
		"tab": "packgluing",
		"tags": {
			"line": "ML1",
			"tsn": "task1",
			"psn": "none",
			"esn": "P000262",
			"usn": "rp888",
			"msn": "08IPBK6001BF6AA4M0100007"
		},
		"fields": {
			"gluedata": [{
				"times": "1",
				"volumeA": "90.11",
				"volumeB": "27.11",
				"volumeAB": "117.11"
			}, {
				"times": "2",
				"volumeA": "90.22",
				"volumeB": "27.22",
				"volumeAB": "117.22"
			}, {
				"times": "3",
				"volumeA": "90.33",
				"volumeB": "27.33",
				"volumeAB": "117.33"
			}],
			"starttime": "2020-04-23 00:25:08",
			"endtime": "2020-04-23 00:25:08",
			"proportion": "0.500",
			"totalvolume": "30.000",
			"uploadtime": "2020-04-23 00:25:08",
			"result": "OK"
		}
	}
}

2.绝缘耐压

http://172.17.50.36:8088/mes-edi/packPackageService/packinsulationvol

[{
"stationName": "P000295",
"testChannel": "通道A",
"testdataId": "688175081",
"moduleCode": "444",
"projectName": "总正耐压测试",
"testStandard": "step4:漏电流(mA) 值＞2 - NG;step4:HIPOT电压(V) 值＜3000 - NG;",
"testResult": "漏电流(mA) = 1.64;HIPOT电压(V) = 3150;",
"projectStatus": "OK",
"testSolutionName": "首件耐压测试方案",
"sumStatus": "OK",
"testUser": "123456",
"testTime": "2021-6-10 10:44:11",
"remark": " ",
"staticDP": "0",
"chargelastdynamicDP": "0",
"chargelaststewingDP": "0",
"dischargelastdynamicDP": "0",
"dischargelaststepAH": "0.000",
"dischargelaststepWH": "0.000",
"dischargestewingDP": "0",
"DODdynamicDP": "0",
"celltempDvalue": "0.000"
}, {
"stationName": "P000295",
"testChannel": "通道A",
"testdataId": "688175081",
"moduleCode": "444",
"projectName": "总负耐压测试",
"testStandard": "step4:漏电流(mA) 值＞2 - NG;step4:HIPOT电压(V) 值＜3000 - NG;",
"testResult": "漏电流(mA) = 1.63;HIPOT电压(V) = 3140;",
"projectStatus": "OK",
"testSolutionName": "首件耐压测试方案",
"sumStatus": "OK",
"testUser": "123456",
"testTime": "2021-6-10 10:44:11",
"remark": " ",
"staticDP": "未知",
"chargelastdynamicDP": "未知",
"chargelaststewingDP": "未知",
"dischargelastdynamicDP": "未知",
"dischargelaststepAH": null,
"dischargelaststepWH": null,
"dischargestewingDP": "未知",
"DODdynamicDP": "未知",
"celltempDvalue": "0.000"
}]

3.通信

http://172.17.50.36:8088/mes-edi/packPackageService/packcommunication/

{
	"cmd": "put",
	"data": {
		"tab": "communication",
		"tags": {
			"wsn": "IPC_OP150",
			"esn": "eol001",
			"psn": "08IP111111",
			"usn": "wangyong",
			"differentialPressure": "144",
			"temperatureDifference": "0",
			"time": "2021-08-6 15:13:58",
			"testResult": "NG"
		},
		"fields": {
			"voltages": {
				"V1": "3.149",
				"V2": "3.245",
				"V3": "3.293",
				"V4": "3.293",
				"V5": "3.293",
				"V6": "3.293",
				"V7": "3.292",
				"V8": "3.291",
				"V9": "3.287"
			},
			"temperatures": {
				"T1": "24",
				"T2": "24",
				"T3": "24"
			}
		}
	}
}

4.气密

http://172.17.50.36:8088/mes-edi/packPackageService/packleaktest

{
	"cmd": "put",
	"data": {
		"tab": "packleaktest",
		"tags": {
			"opcode": "IPC_OP020",
			"line": "line-three",
			"psn": "M001",
			"msn": "110214521802260001",
			"esn": "eol001",
			"usn": "rp888"
		},
		"fields": {
			"productmodel": "AAAAAA ",
			"testPressure": "1",
			"decayvalue": "1",
			"testresult": "1",
			"filltime": "1",
			"stabilizetime": "1",
			"testtime": "1",
			"minpressure": " 1",
			"targetpressure": " none ",
			"maxpressure": " none ",
			"lowlimitrate": " none ",
			"highlimitrate": " none ",
			"intime": " none ",
			"outtime": " none ",
			"sbeat": " none ",
			"uploadtime": "2021-07-24 08:57:03"
		}
	}
}

5.EOL

http://172.17.50.36:8088/mes-edi/packPackageService/packeoltest

{
	"BoxCode": "08IPBN80021E4AB5F0100003",
	"TestResult": "PASS",
	"StationID": "OP100",
	"StartDate": "20210602194655",
	"EndDate": "20210602195003",
	"Dlist": [{
		"Step": "004.BMS绝缘检测",
		"Instructions": "BMS绝缘阻值",
		"Value": "60.127",
		"Judgment": "(BMS绝缘阻值>=2)",
		"Ispass": "PASS",
		"Unit": "MΩ"
	}, {
		"Step": "004.BMS绝缘检测",
		"Instructions": "BMS绝缘阻值",
		"Value": "0.988",
		"Judgment": "(BMS绝缘阻值>=0.9 &&   BMS绝缘阻值<=1.1)",
		"Ispass": "PASS",
		"Unit": "MΩ"
	}, {
		"Step": "005.等电位测试",
		"Instructions": "R",
		"Value": "0.02",
		"Judgment": "(查询测试电阻结果<=0.1)",
		"Ispass": "PASS",
		"Unit": ""
	}, {
		"Step": "006.高压互锁检测",
		"Instructions": "MBCU_Err_HVIL_A",
		"Value": "1",
		"Judgment": "(MBCU_Err_HVIL_A=1)",
		"Ispass": "PASS",
		"Unit": ""
	}, {
		"Step": "006.高压互锁检测",
		"Instructions": "MBCU_Err_HVIL_A",
		"Value": "0",
		"Judgment": "(MBCU_Err_HVIL_A=0)",
		"Ispass": "PASS",
		"Unit": ""
	}, {
		"Step": "007.唤醒检测",
		"Instructions": "ON档唤醒MBCU_KeyFlag",
		"Value": "2",
		"Judgment": "(MBCU_KeyFlag=2)",
		"Ispass": "PASS",
		"Unit": ""
	}, {
		"Step": "007.唤醒检测",
		"Instructions": "快充唤醒MBCU_KeyFlag",
		"Value": "6",
		"Judgment": "(MBCU_KeyFlag>=4)",
		"Ispass": "PASS",
		"Unit": ""
	}, {
		"Step": "008.CC2通讯检测",
		"Instructions": "低压电U1",
		"Value": "11.5011713",
		"Judgment": "(U>=10.8 &&   U<=13.2)",
		"Ispass": "PASS",
		"Unit": "V"
	}, {
		"Step": "009.CAN通讯检测",
		"Instructions": "BMS_Voltage",
		"Value": "330",
		"Judgment": "(BMS_Voltage>280)",
		"Ispass": "PASS",
		"Unit": "V"
	}, {
		"Step": "009.CAN通讯检测",
		"Instructions": "MBCU_Bcu_Temper1",
		"Value": "25.0",
		"Judgment": "(MBCU_Bcu_Temper1>=24 &&   MBCU_Bcu_Temper1<=27)",
		"Ispass": "PASS",
		"Unit": ""
	}, {
		"Step": "009.CAN通讯检测",
		"Instructions": "cc2",
		"Value": "1",
		"Judgment": "(cc2>0)",
		"Ispass": "PASS",
		"Unit": ""
	}, {
		"Step": "010.继电器功能检测",
		"Instructions": "继电器U1",
		"Value": "0.11",
		"Judgment": "(U1<=1)",
		"Ispass": "PASS",
		"Unit": "V"
	}, {
		"Step": "010.继电器功能检测",
		"Instructions": "继电器U2",
		"Value": "329.95",
		"Judgment": "(U2>=320)",
		"Ispass": "PASS",
		"Unit": "V"
	}, {
		"Step": "010.继电器功能检测",
		"Instructions": "继电器U3",
		"Value": "329.97",
		"Judgment": "(U3>=320)",
		"Ispass": "PASS",
		"Unit": "V"
	}, {
		"Step": "011.快充继电器控制检测",
		"Instructions": "快充继电器U1",
		"Value": "-0.05",
		"Judgment": "(U1<=1 &&   U1>=-1)",
		"Ispass": "PASS",
		"Unit": "V"
	}, {
		"Step": "011.快充继电器控制检测",
		"Instructions": "快充继电器U2",
		"Value": "11.51",
		"Judgment": "(U2>=10.8 &&   U2<=13.2)",
		"Ispass": "PASS",
		"Unit": "V"
	}, {
		"Step": "012.碰撞信号检测",
		"Instructions": "MBCU_Ctr_DI3",
		"Value": "0",
		"Judgment": "(MBCU_Ctr_DI3=0)",
		"Ispass": "PASS",
		"Unit": ""
	}, {
		"Step": "012.碰撞信号检测",
		"Instructions": "MBCU_Ctr_DI3",
		"Value": "1",
		"Judgment": "(MBCU_Ctr_DI3=1)",
		"Ispass": "PASS",
		"Unit": ""
	}, {
		"Step": "013.电芯电压",
		"Instructions": "电芯数量",
		"Value": "100",
		"Judgment": "(电芯数量=100)",
		"Ispass": "PASS",
		"Unit": ""
	}, {
		"Step": "013.电芯电压",
		"Instructions": "MaxCellV",
		"Value": "3.301",
		"Judgment": "",
		"Ispass": "PASS",
		"Unit": "V"
	}, {
		"Step": "013.电芯电压",
		"Instructions": "MinCellV",
		"Value": "3.297",
		"Judgment": "",
		"Ispass": "PASS",
		"Unit": "V"
	}, {
		"Step": "013.电芯电压",
		"Instructions": "电芯压差",
		"Value": "4.0",
		"Judgment": "(电芯压差<=5)",
		"Ispass": "PASS",
		"Unit": "mv"
	}, {
		"Step": "014.电芯温度",
		"Instructions": "Tamb",
		"Value": "23.1",
		"Judgment": "(温度>=10 &&   温度<=35)",
		"Ispass": "PASS",
		"Unit": "℃"
	}, {
		"Step": "014.电芯温度",
		"Instructions": "温感数量",
		"Value": "40",
		"Judgment": "(温感数量=40)",
		"Ispass": "PASS",
		"Unit": ""
	}, {
		"Step": "014.电芯温度",
		"Instructions": "Tmax",
		"Value": "25.0",
		"Judgment": "(BMS_MaxBattTemp>=10 &&   BMS_MaxBattTemp<=35)",
		"Ispass": "PASS",
		"Unit": "℃"
	}, {
		"Step": "014.电芯温度",
		"Instructions": "Tmin",
		"Value": "25.0",
		"Judgment": "(BMS_MinBattTemp>=10 &&   BMS_MinBattTemp<=35)",
		"Ispass": "PASS",
		"Unit": "℃"
	}, {
		"Step": "014.电芯温度",
		"Instructions": "电芯温差",
		"Value": "0",
		"Judgment": "(电芯温差<=2)",
		"Ispass": "PASS",
		"Unit": "℃"
	}, {
		"Step": "014.电芯温度",
		"Instructions": "最高与环境温度差",
		"Value": "1.9",
		"Judgment": "(最高与环境温度差<=2)",
		"Ispass": "PASS",
		"Unit": "℃"
	}, {
		"Step": "014.电芯温度",
		"Instructions": "最低与环境温度差",
		"Value": "1.9",
		"Judgment": "(最低与环境温度差<=2)",
		"Ispass": "PASS",
		"Unit": "℃"
	}, {
		"Step": "015.充电座温度",
		"Instructions": "T1",
		"Value": "25",
		"Judgment": "(MBCU_Bcu_Temper1>=24 &&   MBCU_Bcu_Temper1<=26)",
		"Ispass": "PASS",
		"Unit": ""
	}, {
		"Step": "015.充电座温度",
		"Instructions": "T2",
		"Value": "25",
		"Judgment": "(MBCU_Bcu_Temper2>=24 &&   MBCU_Bcu_Temper2<=26)",
		"Ispass": "PASS",
		"Unit": ""
	}, {
		"Step": "015.充电座温度",
		"Instructions": "T3",
		"Value": "-40",
		"Judgment": "(MBCU_Bcu_Temper1=-40)",
		"Ispass": "PASS",
		"Unit": ""
	}, {
		"Step": "015.充电座温度",
		"Instructions": "T4",
		"Value": "-40",
		"Judgment": "(MBCU_Bcu_Temper2=-40)",
		"Ispass": "PASS",
		"Unit": ""
	}]
}

6.称重

http://172.17.50.36:8088/mes-edi/packPackageService/packweight

{
	"cmd": "put",
	"data": {
		"tab": "packweight",
		"tags": {
			"opcode": "IPC_OP220 ",
			"line": "line-one",
			"usn": "1001",
			"psn": "A11111111111111111111111",
			"esn": "packweight"
		},
		"fields": {
			"producerhythm": "121",
			"productweigh": "1",
			"lowweighset": "1",
			"upweighset": "1",
			"testresult": "1",
			"intime": "2018-7-16 9:36:15",
			"outtime": "2018-7-16 9:36:15",
			"uploadtime": "2018-7-16 9:41:15"
		}
	}
}

厂级拧紧数据接口测试_ok

http://172.17.50.36:8088/mes-edi/packPackageService/packtighten

{
	"cmd": "put",
	"data": {
		"tags": {
			"opcode": "IPC_OP020 ",
			"line": "line-1 ",
			"station": "A",
			"esn": "P000001",
			"psn": "MZ110214521802260005",
			"msn": "110214521802260001",
			"line": "line-three",
			"usn": "rp888"
		},
		"fields": {
			"tightencode": "c12",
			"tightprocedurecode": " ",
			"sleevenumber": "1232",
			"lasttorsion": "1232 ",
			"lastangle": "45",
			"minangle": "45",
			"workstepno": "45",
			"stepwisestate": "1",
			"steprhythm": "1",
			"stepstarttime": "1",
			"stependtime": "1",
			"uploadtime": "2019-08-05 12:57:03",
			"maxtorsion": "1",
			"maxangle": "1"
		}
	}
}

厂级扫描数据接口测试_ok

http://172.17.50.36:8088/mes-edi/packPackageService/packscanner

{
	"cmd": "put",
	"data": {
		"tags": {
			"opcode": "IPC_OP170 ",
			"line": "line-three",
			"psn": "MZ110214521802260001",
			"esn": "eol001",
			"usn": "rp888",
			"msn": "material"
		},
		"fields": {
			"workstepno": "1",
			"stepwisestate": "1",
			"steprhythm": "1",
			"intime": "2019-07-30 11:08:09",
			"outtime": "2019-07-30 11:08:09",
			"uploadtime": " 2019-07-30 11:08:09"
		}
	}
}

huanglianggu
关注
MES方案-电池包生产线
08-31
电池包生产线 MES解决方案，希望为入门的同行提供启迪
工厂自动化，信息化中常说的一级，二级，三级...
weixin_30708329的博客
03-11 6848
说来惭愧，在工厂中常听人说二级系统，三级系统，一直不太明确，现整理一下：传动层（L0）级 启停，传动的作用。实现机械设备的开关基础自动化（L1）级 主要是用PLC（可编程逻辑控制器）实现对机械设备的简单控制，但同样只是控制I/O信号的输入和输出，可用程序控制设备的开关启停。过程控制（L2）级 是整个自动化中最核心的控制层，包括跟踪逻辑控制和模型计算，对轧线进行物料跟踪以及实测数据采集和...
生产企业智能制造执行系统解决方案（MES）
找方案
08-17 7638
简介 整体解决方案 和利时经过22年的发展，已经形成的从控制层到制造执行层的整体解决方案。并能够最终与企业的ERP系统无缝集成，形成企业真正一体化的解决方案。 在控制层，我们可以提供先进、成熟的控制系统，提供操作员仿真培训系统和先进控制解决方案，帮助用户实现安全、稳定的生产，提高生产效益；培训熟练的操作人员，进行工艺优化；提供先进控制技术，解决复杂控制问题。 在生产执行层，我们可以提供久经行业考验的实时数据库和生产执行系统，为提高企业的管理效益，提升自动化水平和信息化水平，提供了有力的工具和..
解决方案和项目的关系_宇航大讲堂视频 | 新能源电池生产信息化MES解决方案
weixin_39576018的博客
11-29 273
课程视频：新能源电池生产信息化MES解决方案课程讲师：宇航项目经理/资深精益制造架构师新能源电池行业特点与面临的挑战新能源电池生产信息化建设三部曲新能源电池生产信息化MES解决方案电芯及PACK生产MES管理要点宇航大讲堂课程视频(试看版)观看完整视频了解更多数字化锦囊扫码前往直播间【宇航大讲堂】宇航大讲堂是宇航股份打造的客户培训共享平台，旨在为客户提供系统使用及各种实际应用...
鞍钢冷轧厂制造执行系统(MES)
07-03
3. **系统集成**：冷轧MES与上游厂、公司ERP（企业资源规划）、过程控制系统（PCS）以及厂级管理系统等紧密相连，实现协同工作。 #### 三、系统结构与功能模型 鞍钢新轧钢股份有限公司冷轧厂的MES系统采用了一种...
厂级监控系统SIS产品功能模块简介.docx
09-10
SIS与上层信息系统的连接是指SIS系统与企业的其他信息系统的连接，包括了ERP、MES、SCADA等系统的集成。 9. 实时数据库 实时数据库是指用于存储和管理实时数据的数据库，包括了数据采集、数据处理、数据分析等功能...
厂级数字孪生整体规划.docx
05-05
同时，通过与MES（制造执行系统）、ESB（企业服务总线）等系统的数据融合，构建一个全面的数据视图，推动信息化向数字化的深度转变。 其次，构建厂级数字孪生平台是实现这一目标的关键步骤。平台应涵盖生产、运营、...
Wonderware FactorySuite在昆明卷烟厂生产二部MES系统的应用
10-23
- 原辅料领料申请：根据生产计划自动生成领料申请，与厂级供应部门联动，加速物料流转。 - 生产计划跟踪：实时监控计划执行，便于及时调整。 - 产量统计查询和分析：提供丰富的报表和图表，便于对制丝线和卷包线...
基于粗糙集的数据挖掘算法在MES系统的研究与应用.pdf
07-14
这对于现代制造企业来说，意味着可以通过更为精准的数据分析来指导生产活动，对发生的活动进行快速响应和汇报，形成对变化条件的迅速响应，减少无价值的活动，驱动有效的厂级操作和过程。这有助于企业从数据中获取更...
基于ssm的二手车交易网站设计与实现.docx
09-17
基于ssm的二手车交易网站设计与实现.docx
zotero 6 插件,包含茉莉花、DOI、绿青蛙、sci-hub等11个常用插件
09-17
zotero 6 插件，茉莉花、DOI、绿青蛙、sci-hub、Better notes、GPT、IF、PDF翻译、Style、TAG、影响因子
linux_命令_tail_的升级版，可使用_tails_同时跟踪多个文件并格式化输出成更方便查看的_tails.zip
最新发布
09-17
linux_命令_tail_的升级版，可使用_tails_同时跟踪多个文件并格式化输出成更方便查看的_tails
基于ssm的房屋出租出售系统设计与实现.docx
09-17
基于ssm的房屋出租出售系统设计与实现.docx
jdk9 免安装包，配置环境变量即可
09-17
jdk9 免安装包，配置环境变量即可
吉他谱_Sonne - Rammstein.pdf
09-17
初级入门吉他谱 guitar tab
思科合作伙伴工程师技术参考手册_V2_20080228.pdf
09-17
cisco设备配置指导
Java项目-基于SSM+Jsp的彩妆小样售卖商城的设计与实现（源码+数据库脚本+部署视频+代码讲解视频+全套软件）
09-17
【基于SSM+Jsp的彩妆小样售卖商城的设计与实现】高分通过项目，已获导师指导。 本项目是一套基于SSM+Jsp的彩妆小样售卖商城，主要针对计算机相关专业的正在做毕设的学生和需要项目实战练习的Java学习者。也可作为课程设计、期末大作业 包含：项目源码、数据库脚本、开发说明文档、部署视频、代码讲解视频、全套软件等，该项目可以直接作为毕设使用。 项目都经过严格调试，确保可以运行！
一个自用的中秋数据集，拿来玩的，没啥用
09-17
数据集
工业4.0下的智慧工厂：MES与自动化控制系统
在工业4.0背景下，智慧工厂的网络架构分为厂级、车间级和控制层以太网，以及PLC（Programmable Logic Controller，可编程逻辑控制器）和各类设备的连接，包括安全产品、工业机器人、驱动系统、人机界面等。...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值