刚开始接触iOS开发, 发现网上好多教程和资料都是3.x.x版本的, 跟我现在使用的4.3.3版本有很多区别.
运行的第一个程序是从网上抄来的, 想要的效果是,单击一个已有的按钮后自动创建一个新的按钮,并为新按钮添加事件,使得单击时弹出提示框。
1、运行Xcode,新建一个Single View Application工程,取名DynamicButton:
2、打开ViewController.xib,拖一个按钮到视图,按钮名设置为“添加一个按钮”。
3、选中这个按钮,按住Ctrl,把按钮拖到ViewController.h文件指定位置:
松开鼠标,在弹出的窗口键入以下信息:
即为这个按钮添加响应事件 addButton
4、打开ViewController.m,找到addButton函数,添加以下代码:
- (IBAction)addButton:(id)sender { //动态添加一个按钮 CGRect frame = CGRectMake(300, 300, 300, 50); UIButton *button = [UIButton buttonWithType:UIButtonTypeRoundedRect]; button.frame = frame; [button setTitle:@"新添加的动态按钮" forState: UIControlStateNormal]; button.backgroundColor = [UIColor clearColor]; button.tag = 2000; [button addTarget:self action:@selector(buttonClicked:) forControlEvents:UIControlEventTouchUpInside]; [self.view addSubview:button]; }
5、在addButton函数后边添加一个函数:
//这个是新按钮的响应函数 -(IBAction) buttonClicked:(id)sender { UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"提示" message:@"单击了动态按钮!" delegate:self cancelButtonTitle:@"确定" otherButtonTitles:nil]; [alert show]; [alert release]; }
6、编译并运行:
原来的程序是用在Pad上的, 所以
CGRectMake(300, 300, 300, 50);
这句的XY坐标不合适iPhone了, 需要改成CGRectMake(10, 300,300,50);(分别表示: x坐标,y坐标,宽度width,高度height, 参考点是左上角.)
过把瘾就好, 想学好iPhone开发, 还是先去学学Objective-C吧.