全志R16平台的tinav2.0系统下调通HM1375
2017/8/24 14:04
开发板：SC3817R
OS：tina V2.0
1、最新的驱动程序请直接联系HiMax原厂/代理商！
R:\wyb\thl_r16_tinav2.0_hm1375\lichee\linux-3.4\drivers\media\video\sunxi-vfe\device\hm1375.c
2、
R:\wyb\thl_r16_tinav2.0_hm1375\lichee\linux-3.4\drivers\media\video\sunxi-vfe\device\Makefile
EXTRA_LDFLAGS += --strip-debug
ifneq ($(strip $(CONFIG_ARCH_SUN8IW8)),)
obj-$(CONFIG_OV2710_MIPI)+= ov2710_mipi.o
obj-$(CONFIG_OV4689)+= ov4689.o
obj-$(CONFIG_OV4689_60FPS)+= ov4689_60fps.o
obj-$(CONFIG_AR0330_MIPI)+= ar0330_mipi.o
obj-$(CONFIG_OV4689_SDV)+= ov4689_sdv.o
obj-$(CONFIG_GC1004_MIPI)+= gc1004_mipi.o
obj-$(CONFIG_H22_MIPI)+= h22_mipi.o
obj-$(CONFIG_NT99231_MIPI)+= nt99231_mipi.o
else
obj-m+= hm1375.o
#obj-m+= ov5640.o
#obj-m+= ov2640.o
#obj-m+= ov7736.o
#obj-m+= s5k4ec.o
#obj-m+= s5k4ec_mipi.o
#obj-m+= gc2035.o
#obj-m+= gt2005.o
#obj-m+= gc0307.o
#obj-m+= gc0308.o
#obj-m+= gc0328.o
#obj-m+= gc0328c.o
#obj-m+= gc0329.o
#obj-m+= gc0311.o
#obj-m+= hi253.o
#obj-m+= sp2518.o
#obj-m+= sp2519.o
#obj-m+= sp0718.o
#obj-m+= sp0838.o
#obj-m+= ov16825.o
#obj-m+= ov5650.o
#obj-m+= ov5647.o
#obj-m+= ov5647_mipi.o
#obj-m+= t8et5.o
#obj-m+= s5k4e1.o
#obj-m+= s5k4e1_mipi.o
#obj-m+= sp2518.o
#obj-m+= sp0718.o
#obj-m+= gc5004.o
#obj-m+= gc5004_mipi.o
#obj-m+= ov5648.o
#obj-m+= ar0330.o
#obj-m+= ov5648.o
#obj-m+= sp5408.o
#obj-m+= ov12830.o
#obj-m+= ov8825.o
#obj-m+= ov8850.o
#obj-m+= gc2155.o
#obj-m+= gc2145.o
#obj-m+= gc2145d.o
#obj-m+= ov8858.o
#obj-m+= ov13850.o
#obj-m+= imx214.o
#obj-m+= ov8858_4lane.o
#obj-m+= sp5409.o
#obj-m+= s5k5e2yx.o
#obj-m+= ov2710_mipi.o
#obj-m+= siv121d.o
#obj-m+= ov2710_mipi.o
#obj-m+= bg0703.o
#obj-m+= gc1014_mipi.o
#obj-m+= imx219.o
#obj-m+= imx224.o
#obj-m+= imx322.o
#obj-m+= ov8858_r2a_4lane.o
#obj-m+= ov8865_4lane.o
#obj-m+= ps1210.o
#obj-m+= imx291.o
endif
3、让tinav2.0启动之后不让摄像头camera休眠：
R:\wyb\thl_r16_tinav2.0_hm1375\lichee\linux-3.4\drivers\media\video\sunxi-vfe\vfe.c
static void probe_work_handle(struct work_struct *work)
{
struct vfe_dev *dev= container_of(work, struct vfe_dev, probe_work.work);
int ret = 0;
int input_num;
int device_valid_count = 0;
struct video_device *vfd;
char vfe_name[16] = {0};
mutex_lock(&probe_hdl_lock);
vfe_print("probe_work_handle start!\n");
vfe_dbg(0,"v4l2_device_register\n");
#ifdef USE_SPECIFIC_CCI
vfe_clk_open(dev);
#endif
/* v4l2 device register */
ret = v4l2_device_register(&dev->pdev->dev, &dev->v4l2_dev);
if (ret) {
vfe_err("Error registering v4l2 device\n");
goto probe_hdl_free_dev;
}
dev_set_drvdata(&dev->pdev->dev, (dev));
vfe_dbg(0,"v4l2 subdev register\n");
/* v4l2 subdev register */
dev->is_same_module = 0;
for(input_num=0; input_num<dev->dev_qty; input_num++)
{
vfe_print("v4l2 subdev register input_num = %d\n",input_num);
if(!strcmp(dev->ccm_cfg[input_num]->ccm,""))
{
vfe_err("Sensor name is NULL!\n");
goto snesor_register_end;
}
if(dev->is_same_module)
{
dev->ccm_cfg[input_num]->sd = dev->ccm_cfg[input_num-1]->sd;
vfe_dbg(0,"num = %d , sd_0 = %p,sd_1 = %p\n",input_num,dev->ccm_cfg[input_num]->sd,dev->ccm_cfg[input_num-1]->sd);
goto snesor_register_end;
}
if((dev->dev_qty > 1) && (input_num+1<dev->dev_qty))
{
if((!strcmp(dev->ccm_cfg[input_num]->ccm,dev->ccm_cfg[input_num+1]->ccm)))
dev->is_same_module = 1;
}
if(dev->vip_define_sensor_list == 1)
{
if(dev->ccm_cfg[input_num]->sensor_cfg_ini->power_settings_enable == 1)
{
cpy_ccm_power_settings(dev->ccm_cfg[input_num]);
}
}
#ifdef _REGULATOR_CHANGE_
#else
if(vfe_device_regulator_get(dev->ccm_cfg[input_num]))
{
vfe_err("vfe_device_regulator_get error at input_num = %d\n",input_num);
goto snesor_register_end;
}
#endif
vfe_print("vfe sensor detect start! input_num = %d\n",input_num);
dev->input = input_num;
if(vfe_sensor_register_check(dev,&dev->v4l2_dev,dev->ccm_cfg[input_num],&dev->dev_sensor[input_num],input_num) == NULL)
{
vfe_err("vfe sensor register check error at input_num = %d\n",input_num);
dev->device_valid_flag[input_num] = 0;
//goto snesor_register_end;
}
else{
dev->device_valid_flag[input_num] = 1;
device_valid_count ++;
}
if(dev->ccm_cfg[input_num]->is_isp_used && dev->ccm_cfg[input_num]->is_bayer_raw)
{
if(read_ini_info(dev,input_num, "/system/etc/hawkview/"))
{
vfe_warn("read ini info fail\n");
}
}
if(dev->ccm_cfg[input_num]->act_used == 1)
{
dev->dev_act[input_num].addr = (unsigned short)(dev->ccm_cfg[input_num]->act_slave>>1);
strcpy(dev->dev_act[input_num].type,dev->ccm_cfg[input_num]->act_name);
if(vfe_actuator_subdev_register(dev,dev->ccm_cfg[input_num], &dev->dev_act[input_num]) != 0)
;//goto probe_hdl_free_dev;
}
snesor_register_end:
vfe_dbg(0,"dev->ccm_cfg[%d] = %p\n",input_num,dev->ccm_cfg[input_num]);
vfe_dbg(0,"dev->ccm_cfg[%d]->sd = %p\n",input_num,dev->ccm_cfg[input_num]->sd);
vfe_dbg(0,"dev->ccm_cfg[%d]->power.iovdd = %p\n",input_num,dev->ccm_cfg[input_num]->power.iovdd);
vfe_dbg(0,"dev->ccm_cfg[%d]->power.avdd = %p\n",input_num,dev->ccm_cfg[input_num]->power.avdd);
vfe_dbg(0,"dev->ccm_cfg[%d]->power.dvdd = %p\n",input_num,dev->ccm_cfg[input_num]->power.dvdd);
vfe_dbg(0,"dev->ccm_cfg[%d]->power.afvdd = %p\n",input_num,dev->ccm_cfg[input_num]->power.afvdd);
}
dev->input = -1;
/*video device register */
ret = -ENOMEM;
vfd = video_device_alloc();
if (!vfd)
{
goto probe_hdl_unreg_dev;
}
*vfd = vfe_template[dev->id];
vfd->v4l2_dev = &dev->v4l2_dev;
sprintf(vfe_name,"vfe-%d",dev->id);
dev_set_name(&vfd->dev, vfe_name);
if (0 != device_valid_count)
{
ret = video_register_device(vfd, VFL_TYPE_GRABBER, dev->id);
if (ret < 0)
{
goto probe_hdl_rel_vdev;
}
}
video_set_drvdata(vfd, dev);
/*add device list*/
/* Now that everything is fine, let's add it to device list */
list_add_tail(&dev->devlist, &devlist);
dev->vfd = vfd;
vfe_print("V4L2 device registered as %s\n",video_device_node_name(vfd));
/*initial video buffer queue*/
videobuf_queue_dma_contig_init(&dev->vb_vidq, &vfe_video_qops, NULL, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_NONE,//default format, can be changed by s_fmt
sizeof(struct vfe_buffer), dev,NULL);
ret = sysfs_create_group(&dev->pdev->dev.kobj, &vfe_attribute_group);
#ifdef CONFIG_ES
dev->early_suspend.level = EARLY_SUSPEND_LEVEL_DISABLE_FB + 1;
dev->early_suspend.suspend = vfe_early_suspend;
dev->early_suspend.resume = vfe_late_resume;
// [hawkview_err]xxxxcan't open /dev/video0(Resource temporarily unavailable)
// 2016/10/25 14:33 wenyuanbo cloase suspend.
// register_early_suspend(&dev->early_suspend);
vfe_print("register_early_suspend @ probe handle!\n");
#endif
#ifdef USE_SPECIFIC_CCI
vfe_clk_close(dev);
#endif
vfe_print("probe_work_handle end!\n");
mutex_unlock(&probe_hdl_lock);
return ;
probe_hdl_rel_vdev:
video_device_release(vfd);
vfe_print("video_device_release @ probe_hdl!\n");
probe_hdl_unreg_dev:
vfe_print("v4l2_device_unregister @ probe_hdl!\n");
v4l2_device_unregister(&dev->v4l2_dev);
probe_hdl_free_dev:
vfe_print("vfe_resource_release @ probe_hdl!\n");
#ifdef USE_SPECIFIC_CCI
csi_cci_exit_helper(dev->cci_sel);
vfe_clk_close(dev);
#endif
//vfe_resource_release(dev);
vfe_err("Failed to install at probe handle\n");
mutex_unlock(&probe_hdl_lock);
return ;
}
4、
R:\wyb\thl_r16_tinav2.0_hm1375\package\allwinner\cameratest\src\common\hawkview.c
int fetch_sub_cmd(const char* buf,int buf_len,char** cmd,int* cmd_num,int lenght)
{
int i = 0,j = 0,n = 0;
while(buf[i] != '#'){ //the sub cmd end by '#'
while(buf[i] != 'x' && buf[i] != ':' && buf[i] != '#') {
if((i+1) > buf_len) return 0;
修改为：
if(i++ > buf_len) return 0;
*((char*)cmd + n*lenght + j++) = buf[i++];
if(j > lenght) {
hv_err("sub cmd over long\n");
*cmd_num = n + 1;
return -1;
}
}
*((char*)cmd + n*lenght + j++) = '\0';
n++;
j = 0;
if(buf[i] != '#'){
i++;
}
if(n > *cmd_num){
hv_err("the max cmd num is %d\n",*cmd_num);
return -1;
}
}
*cmd_num = n;
return 0;
}
R:\wyb\thl_r16_tinav2.0_hm1375\package\allwinner\cameratest\src\common\video.c
static int capture_frame(void* capture,int (*set_disp_addr)(int,int,unsigned int*),pthread_mutex_t* mutex)
{
capture_handle* cap = (capture_handle*)capture;
int ret;
int i;
struct v4l2_buffer buf;
enum v4l2_buf_type type;
fd_set fds;
struct timeval tv;
pthread_mutex_lock(mutex);
//used for cammand and status debug
if (old_vi_cmd != cap->cmd){
hv_dbg("capture frame command %d --> %d\n",old_vi_cmd,cap->cmd);
old_vi_cmd = (int)cap->cmd;
}
if(old_status != cap->status){
hv_dbg("capture frame status %d --> %d\n",old_status,cap->status);
old_status = cap->status;
}
if(cap->status == OFF && cap->cmd == START_STREAMMING){
hv_dbg("capture start streaming\n");
type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
if (ioctl(videofh, VIDIOC_STREAMON, &type) == -1) {
hv_err("VIDIOC_STREAMON error! %s\n",strerror(errno));
goto quit;
}
cap->status = ON;
cap->cmd = COMMAND_UNUSED;
pthread_mutex_unlock(mutex);
return 0;
}
if(cap->status == ON && cap->cmd == STOP_STREAMMING){
hv_dbg("capture stop streaming\n");
type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
if(-1 == ioctl(videofh, VIDIOC_STREAMOFF, &type)){
hv_err("VIDIOC_STREAMOFF error! %s\n",strerror(errno));
goto quit;
}
cap->status = OFF;
cap->cmd = COMMAND_UNUSED;
capture_quit(capture);
pthread_mutex_unlock(mutex);
return 2;
}
if(cap->status == OFF) {
pthread_mutex_unlock(mutex);
return 0;
}
FD_ZERO(&fds);
FD_SET(videofh, &fds);
tv.tv_sec = 2;
tv.tv_usec = 0;
pthread_mutex_unlock(mutex);
ret = select(videofh + 1, &fds, NULL, NULL, &tv);
pthread_mutex_lock(mutex);
//hv_dbg("select video ret: %d\n",ret);
if (ret == -1) {
if (errno == EINTR) {
return 0;
}
hv_err("select error\n");
goto stream_off;
}
else if (ret == 0) {
hv_err("select timeout\n");
pthread_mutex_unlock(mutex);
return 0;
}
memset(&buf, 0, sizeof(struct v4l2_buffer));
buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
buf.memory = V4L2_MEMORY_MMAP;
ret = ioctl(videofh, VIDIOC_DQBUF, &buf);
if (ret == -1) {
hv_err("VIDIOC_DQBUF failed!\n");
goto stream_off;
}
float framerate;
framerate = get_framerate((long long)(buf.timestamp.tv_sec),(long long)(buf.timestamp.tv_usec));
if(framerate > 1.0){
cap->cap_fps = framerate;
//hv_dbg("framerate: %0.2ffps\n",cap->cap_fps);
}
//sync capture info perp x second
#define M_SECOND 200
if(is_x_msec(M_SECOND,(long long)(buf.timestamp.tv_sec),(long long)(buf.timestamp.tv_usec))){
getExifInfo(&(cap->frame.exif));
set_cap_info((void*)cap);
修改为：
// set_cap_info((void*)cap);
}
if(cap->cmd == STOP_SAVE_FRAME && cap->save_status == ON)
cap->save_status = OFF;
//save frame , the frame will be get by PC Tool to preview on PC screen
//frame format: /dev/frame_x (x:0~21)
if(cap->cmd == SAVE_FRAME || cap->save_status == ON ) {
if(cap->cmd == SAVE_FRAME){
cap->save_status = ON;
cap->cmd = COMMAND_UNUSED;
}
ret = do_save_frame(capture,buf.index);
}
//take yuv image,it will save the target frame exif info in the same time
//image name: xxxx (set by usered through command)
//exif info name: xxxx.exif
if(cap->cmd == SAVE_IMAGE ) {
ret = 0;//getExifInfo(&(cap->picture.exif));
//get target frame exif info successfully then save the target image
//if get the exif info fail,it will try next frame
if(ret == 0){
buffers[buf.index].phy_addr = buf.m.offset - 0x20000000;
hv_dbg("index: %d buffers[buf.index].start = %p\n",buf.index,buffers[buf.index].start);
//do_save_image(capture,buf.index);
do_save_sub_image(capture,buf.index);
cap->cmd = COMMAND_UNUSED;
}
}
//get display addr
int w,h;
unsigned int addr;
get_disp_addr(capture, buf.m.offset,&addr,&w,&h);
// set disp buffer
if (set_disp_addr){
set_disp_addr(w,h,&addr);
}
ret = ioctl(videofh, VIDIOC_QBUF, &buf);
if (ret == -1) {
hv_err("VIDIOC_DQBUF failed!\n");
goto stream_off;
}
pthread_mutex_unlock(mutex);
return 0;
stream_off:
hv_err("err stream off\n");
ioctl(videofh, VIDIOC_STREAMOFF, &type);
quit:
capture_quit(capture);
pthread_mutex_unlock(mutex);
return -1;
}
R:\wyb\thl_r16_tinav2.0_hm1375\package\allwinner\cameratest\src\common\video_helper.c
int set_cap_info(void* capture)
{
char info[500];
char exif[500];
char file_path[20];
capture_handle* cap = (capture_handle*)capture;
memset(info,0,sizeof(info));
strcpy(file_path,"dev/info");
修改为：
//strcpy(file_path, "dev/info");
sprintf(file_path, "%s/%s.info", PATH, cap->picture.path_name);
//sync string: sensor_type:save_status:framrate:capture_w:capture_h,sub_w,sub_h#
sprintf(info, \
"sensor_type = %s\n" \
"status = %d\n" \
"framerate = %0.2f\n" \
"subchanel_width = %d\n" \
"subchanel_height = %d\n" \
"rotation = %d\n\n", \
(cap->sensor_type == 1)?"raw":"yuv", \
cap->save_status, \
cap->cap_fps, \
cap->sub_w, \
cap->sub_h, \
cap->sub_rot);
make_exif_info(exif,"none",&(cap->frame.exif),cap->cap_w,cap->cap_h);
strcat(info,exif);
//hv_dbg("info str:\n%s\n",info);
return write_file(file_path,info,sizeof(info));
}
int do_save_sub_image(void* capture,int buf_index)
{
int ret;
char image_name[30];
capture_handle* cap = (capture_handle*)capture;
memset(image_name,0,sizeof(image_name));
sprintf(image_name,"%s/%s", PATH,cap->picture.path_name);
hv_dbg("image_name: %s\n",image_name);
（建议增加这里）
set_cap_info(capture);
set_exif_info(capture);
hv_dbg("--------set_exif_info end\n");
void* vir_sub_start = NULL;
unsigned int phy_sub_start = 0;
int w,h;
if(cap->sensor_type == V4L2_SENSOR_TYPE_RAW){
vir_sub_start = (unsigned int)(buffers[buf_index].start) + ALIGN_4K(ALIGN_16B(cap->cap_w) * cap->cap_h * 3 >> 1);
phy_sub_start = buffers[buf_index].phy_addr + ALIGN_4K(ALIGN_16B(cap->cap_w) * cap->cap_h * 3 >> 1);
w = cap->sub_w;
h = cap->sub_h;
}
else {
vir_sub_start = buffers[buf_index].start;
phy_sub_start = buffers[buf_index].phy_addr;
w = cap->cap_w;
h = cap->cap_h;
}
#ifdef ANDROID_ENV
ret = save_jpeg_frame(image_name,phy_sub_start,w,h);
//sprintf(image_name,"/data/camera/yuv%s", cap->picture.path_name);
//ret = save_jpeg_frame_by_viraddr(image_name,(void*)vir_sub_start,cap->sub_w,cap->sub_h);
#else
sprintf(image_name,"%s/yuv%s", PATH,cap->picture.path_name);
ret = save_frame_to_file(image_name, \
(void*)(vir_sub_start), \
w,h,cap->cap_fmt, \
1);
#endif
if(ret == -1)
hv_err("save image failed!\n");
return 0;
}
5、可选增加fpscamera：
R:\wyb\thl_r16_tinav2.0_hm1375\package\allwinner\fpscamera
6、
define KernelPackage/sunxi-vfe
SUBMENU:=$(VIDEO_MENU)
TITLE:=sunxi-vfe support
FILES:=$(LINUX_DIR)/drivers/media/video/videobuf-core.ko
FILES+=$(LINUX_DIR)/drivers/media/video/videobuf-dma-contig.ko
FILES+=$(LINUX_DIR)/drivers/media/video/sunxi-vfe/csi_cci/cci.ko
FILES+=$(LINUX_DIR)/drivers/media/video/sunxi-vfe/vfe_os.ko
FILES+=$(LINUX_DIR)/drivers/media/video/sunxi-vfe/vfe_subdev.ko
FILES+=$(LINUX_DIR)/drivers/media/video/sunxi-vfe/device/gc0308.ko
FILES+=$(LINUX_DIR)/drivers/media/video/sunxi-vfe/vfe_v4l2.ko
AUTOLOAD:=$(call AutoLoad,90,videobuf-core videobuf-dma-contig cci vfe_os vfe_subdev gc0308 vfe_v4l2)
endef
修改为：
define KernelPackage/sunxi-vfe
SUBMENU:=$(VIDEO_MENU)
TITLE:=sunxi-vfe support
FILES:=$(LINUX_DIR)/drivers/media/video/videobuf-core.ko
FILES+=$(LINUX_DIR)/drivers/media/video/videobuf-dma-contig.ko
FILES+=$(LINUX_DIR)/drivers/media/video/sunxi-vfe/csi_cci/cci.ko
FILES+=$(LINUX_DIR)/drivers/media/video/sunxi-vfe/vfe_os.ko
FILES+=$(LINUX_DIR)/drivers/media/video/sunxi-vfe/vfe_subdev.ko
FILES+=$(LINUX_DIR)/drivers/media/video/sunxi-vfe/device/hm1375.ko
FILES+=$(LINUX_DIR)/drivers/media/video/sunxi-vfe/vfe_v4l2.ko
AUTOLOAD:=$(call AutoLoad,90,videobuf-core videobuf-dma-contig cci vfe_os vfe_subdev hm1375 vfe_v4l2)
endef
7、
R:\wyb\thl_r16_tinav2.0_hm1375\target\allwinner\astar-parrot\configs\sys_config.fex
;----------------------------------------------------------------------------------
;dcdc1_vol ---set dcdc1 voltage,mV,1600-3400,100mV/step
;dcdc2_vol ---set dcdc2 voltage,mV,600-1540,20mV/step
;dcdc3_vol ---set dcdc3 voltage,mV,600-1860,20mV/step
;dcdc4_vol ---set dcdc4 voltage,mV,600-1540,20mV/step
;dcdc5_vol ---set dcdc5 voltage,mV,1000-2550,50mV/step
;aldo2_vol ---set aldo2 voltage,mV,700-3300,100mV/step
;aldo3_vol ---set aldo3 voltage,mV,700-3300,100mV/step
;----------------------------------------------------------------------------------
[power_sply]
dcdc1_vol = 3000
dcdc2_vol = 1100
dcdc3_vol = 1200
dcdc4_vol = 0
dcdc5_vol = 1500
aldo2_vol = 2500
aldo3_vol = 3000
dldo3_vol = 2800
;gpio0_vol = 2800
ldoio0_vol = 2800
[twi2]
twi_used = 1
twi_scl = port:PE12<3><default><default><default>
twi_sda = port:PE13<3><default><default><default>
;--------------------------------------------------------------------------------
;vip (video input port) configuration
;vip_used: 0:disable 1:enable
;vip_mode: 0:sample one interface to one buffer 1:sample two interface to one buffer
;vip_dev_qty: The quantity of devices linked to capture bus
;
;vip_define_sensor_list: If you want use sensor detect function, please set vip_define_sensor_list = 1, and
; verify that file /system/etc/hawkview/sensor_list_cfg.ini is properly configured!
;
;vip_dev(x)_pos: sensor position, "rear" or "front", if vip_define_sensor_list = 1,vip_dev(x)_pos must be configured!
;
;vip_dev(x)_isp_used 0:not use isp 1:use isp
;vip_dev(x)_fmt: 0:yuv 1:bayer raw rgb
;vip_dev(x)_stby_mode: 0:not shut down power at standby 1:shut down power at standby
;vip_dev(x)_vflip: flip in vertical direction 0:disable 1:enable
;vip_dev(x)_hflip: flip in horizontal direction 0:disable 1:enable
;vip_dev(x)_iovdd: camera module io power handle string, pmu power supply
;vip_dev(x)_iovdd_vol: camera module io power voltage, pmu power supply
;vip_dev(x)_avdd: camera module analog power handle string, pmu power supply
;vip_dev(x)_avdd_vol: camera module analog power voltage, pmu power supply
;vip_dev(x)_dvdd: camera module core power handle string, pmu power supply
;vip_dev(x)_dvdd_vol: camera module core power voltage, pmu power supply
;vip_dev(x)_afvdd: camera module vcm power handle string, pmu power supply
;vip_dev(x)_afvdd_vol: camera module vcm power voltage, pmu power supply
;x indicates the index of the devices which are linked to the same capture bus
;fill voltage in uV, e.g. iovdd = 2.8V, vip_devx_iovdd_vol = 2800000
;fill handle string as below:
;axp22_eldo3
;axp22_dldo4
;axp22_eldo2
;fill handle string "" when not using any pmu power supply
;--------------------------------------------------------------------------------
[csi0]
vip_used = 1
vip_mode = 0
vip_dev_qty = 1
vip_define_sensor_list = 0
vip_csi_pck = port:PE00<2><default><default><default>
vip_csi_mck = port:PE01<2><default><default><default>
vip_csi_hsync = port:PE02<2><default><default><default>
vip_csi_vsync = port:PE03<2><default><default><default>
vip_csi_d0 = port:PE04<2><default><default><default>
vip_csi_d1 = port:PE05<2><default><default><default>
vip_csi_d2 = port:PE06<2><default><default><default>
vip_csi_d3 = port:PE07<2><default><default><default>
vip_csi_d4 = port:PE08<2><default><default><default>
vip_csi_d5 = port:PE09<2><default><default><default>
vip_csi_d6 = port:PE10<2><default><default><default>
vip_csi_d7 = port:PE11<2><default><default><default>
;vip_csi_sck = port:PE12<2><default><default><default>
;vip_csi_sda = port:PE13<2><default><default><default>
vip_dev0_mname = "hm1375"
vip_dev0_pos = "rear"
vip_dev0_lane = 1
vip_dev0_twi_id = 2
vip_dev0_twi_addr = 0x48
vip_dev0_isp_used = 0
vip_dev0_fmt = 0
（调试的时候推荐选0，给摄像头时钟供电，方便测量电压：）
vip_dev0_stby_mode = 0
vip_dev0_vflip = 0
vip_dev0_hflip = 0
vip_dev0_iovdd = ""
vip_dev0_iovdd_vol = 2800000
vip_dev0_avdd = "axp22_ldoio0"
vip_dev0_avdd_vol = 2800000
vip_dev0_dvdd = ""
vip_dev0_dvdd_vol = 1800000
vip_dev0_afvdd = ""
vip_dev0_afvdd_vol = 2800000
vip_dev0_power_en =
vip_dev0_reset = port:PE14<1><default><default><0>
vip_dev0_pwdn = port:PE15<1><default><default><1>
vip_dev0_flash_en =
vip_dev0_flash_mode =
vip_dev0_af_pwdn =
8、可选：
rootroot@rootroot-E400:~/wyb/thl_r16_tinav2.0_hm1375$ make menuconfig
内核的修改保存在这里：
R:\wyb\thl_r16_tinav2.0_hm1375\target\allwinner\astar-parrot\config-3.4
rootroot@rootroot-E400:~/wyb/thl_r16_tinav2.0_hm1375$ make menuconfig
系统的修改保存在这里：
R:\wyb\thl_r16_tinav2.0_hm1375\target\allwinner\astar-parrot\defconfig
9、为了调试方便，可选修改：
R:\wyb\thl_r16_tinav2.0_hm1375\target\allwinner\generic\configs\env.cfg
bootdelay=3
#default bootcmd, will change at runtime according to key press
bootcmd=run setargs_nand boot_normal#default nand boot
#kernel command arguments
console=ttyS0,115200
nor_root=/dev/mtdblock4
nand_root=/dev/nandd
mmc_root=/dev/mmcblk0p7
init=/sbin/init
loglevel=8
#set kernel cmdline if boot.img or recovery.img has no cmdline we will use this
setargs_nor=setenv bootargs console=${console} root=${nor_root} rootwait init=${init} ion_cma_list="8m,32m,64m,128m,256m"loglevel=${loglevel} partitions=${partitions}
setargs_nand=setenv bootargs console=${console} root=${nand_root} rootwait init=${init} ion_cma_list="8m,32m,64m,128m,256m" loglevel=${loglevel} partitions=${partitions}
setargs_mmc=setenv bootargs console=${console} root=${mmc_root} rootwait init=${init} ion_cma_list="8m,32m,64m,128m,256m" loglevel=${loglevel} partitions=${partitions}
#nand command syntax: sunxi_flash read address partition_name read_bytes
#0x40007800 = 0x40008000(kernel entry) - 0x800(boot.img header 2k)
boot_normal=fatload sunxi_flash boot 43800000 uImage;bootm 43800000
boot_recovery=fatload sunxi_flash extend 43800000 uImage;bootm 43800000
boot_fastboot=fastboot
#recovery key
recovery_key_value_max=0x13
recovery_key_value_min=0x10
#fastboot key
fastboot_key_value_max=0x8
fastboot_key_value_min=0x2
10、先编译一遍tianv2.0的系统，然后增加sunxi-vfe support支持：
rootroot@rootroot-E400:~$ cd wyb/thl_r16_tinav2.0_hm1375/
rootroot@rootroot-E400:~/wyb/thl_r16_tinav2.0_hm1375$
rootroot@rootroot-E400:~/wyb/thl_r16_tinav2.0_hm1375$ 7za x thl_r16_tinav2.0_hm1375等待最终验证_20170824_1141.7z -r -o./
rootroot@rootroot-E400:~/wyb/thl_r16_tinav2.0_hm1375$ source build/envsetup.sh
including target/allwinner/octopus-dev/vendorsetup.sh
including target/allwinner/astar-parrot/vendorsetup.sh
including target/allwinner/astar-evb/vendorsetup.sh
including target/allwinner/generic/vendorsetup.sh
including target/allwinner/tulip-d1/vendorsetup.sh
including target/allwinner/astar-spk/vendorsetup.sh
rootroot@rootroot-E400:~/wyb/thl_r16_tinav2.0_hm1375$ lunch
You're building on Linux
Lunch menu... pick a combo:
1. octopus_dev-tina
2. octopus_dev-dragonboard
3. astar_parrot-tina
4. astar_parrot-dragonboard
5. astar_evb-tina
6. tulip_d1-tina
7. tulip_d1-dragonboard
8. astar_spk-tina
9. astar_spk-dragonboard
Which would you like?3
============================================
PLATFORM_VERSION_CODENAME=Neptune
PLATFORM_VERSION=2.0.0
TARGET_PRODUCT=astar_parrot
TARGET_BUILD_VARIANT=tina
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm
TARGET_ARCH_VARIANT=armv7-a-neon
TARGET_CPU_VARIANT=cortex-a7
TARGET_2ND_ARCH=
TARGET_2ND_ARCH_VARIANT=
TARGET_2ND_CPU_VARIANT=
HOST_ARCH=x86_64
HOST_OS=linux
HOST_OS_EXTRA=Linux-3.13.0-24-generic-x86_64-with-Ubuntu-14.04-trusty
HOST_BUILD_TYPE=release
BUILD_ID=57513AA3
OUT_DIR=
============================================
rootroot@rootroot-E400:~/wyb/thl_r16_tinav2.0_hm1375$ make -j8
rootroot@rootroot-E400:~/wyb/thl_r16_tinav2.0_hm1375$ pack -d
rootroot@rootroot-E400:~/wyb/thl_r16_tinav2.0_hm1375$ make menuconfig
Allwinner --->
< > fpscamera................................. fpscamera just test the camera
修改为：
<*> fpscamera................................. fpscamera just test the camera
Kernel modules --->
Video Support --->
< > kmod-sunxi-vfe......................................... sunxi-vfe support
修改为：
<*> kmod-sunxi-vfe......................................... sunxi-vfe support
rootroot@rootroot-E400:~/wyb/thl_r16_tinav2.0_hm1375$ make -j12
rootroot@rootroot-E400:~/wyb/thl_r16_tinav2.0_hm1375$ pack -d
11、加载hm1375的驱动的时候查看I2C是否是通的：
R:\wyb\thl_r16_tinav2.0_hm1375\lichee\linux-3.4\drivers\media\video\sunxi-vfe\device\hm1375.c
static int sensor_detect(struct v4l2_subdev *sd)
{
int ret;
unsigned char rdval;
printk("****wyb %s:%d/%s()! verify HM1375\n", __FILE__, __LINE__, __func__);
LOG_ERR_RET(sensor_read(sd, 0x0001, &rdval))
ret = sensor_read(sd, 0x0001,&rdval);
printk("****wyb %s:%d/%s()! reg:0x0001=value:0xx right=0x03/0x13\n", __FILE__, __LINE__, __func__, rdval);
if (ret < 0) {
vfe_dev_err("sensor_read err at sensor_detect!\n");
return ret;
}
if((rdval != 0x03) && (rdval != 0x13))
{
vfe_dev_err("read high val: %d\n", rdval);
return -ENODEV;
}
LOG_ERR_RET(sensor_read(sd, 0x0002, &rdval))
printk("****wyb %s:%d/%s()! reg:0x0002=value:0xx right=0x75\n", __FILE__, __LINE__, __func__, rdval);
if(rdval != 0x75)
{
vfe_dev_err("read low val: %d\n", rdval);
return -ENODEV;
}
printk("HM1375 sensor_detect OK\r\n");
return 0;
}
（奇怪的时候HM1375的0x0001号寄存器，第一次读是0x03，以后都是0x13，好神奇！）
[ 16.030894] ****wyb drivers/media/video/sunxi-vfe/device/hm1375.c:2891/sensor_detect()! verify HM1375
[ 16.042100] ****wyb drivers/media/video/sunxi-vfe/device/hm1375.c:2895/sensor_detect()! reg:0x0001=value:0x03 right=0x03/0x13
[ 16.055259] ****wyb drivers/media/video/sunxi-vfe/device/hm1375.c:2909/sensor_detect()! reg:0x0002=value:0x75 right=0x75
[ 16.067560] HM1375 sensor_detect OK
[ 47.398156] ****wyb drivers/media/video/sunxi-vfe/device/hm1375.c:2891/sensor_detect()! verify HM1375
[ 47.409351] ****wyb drivers/media/video/sunxi-vfe/device/hm1375.c:2895/sensor_detect()! reg:0x0001=value:0x13 right=0x03/0x13
[ 47.422492] ****wyb drivers/media/video/sunxi-vfe/device/hm1375.c:2909/sensor_detect()! reg:0x0002=value:0x75 right=0x75
[ 47.434769] HM1375 sensor_detect OK
[ 88.217828] ****wyb drivers/media/video/sunxi-vfe/device/hm1375.c:2891/sensor_detect()! verify HM1375
[ 88.228920] ****wyb drivers/media/video/sunxi-vfe/device/hm1375.c:2895/sensor_detect()! reg:0x0001=value:0x13 right=0x03/0x13
[ 88.242056] ****wyb drivers/media/video/sunxi-vfe/device/hm1375.c:2909/sensor_detect()! reg:0x0002=value:0x75 right=0x75
[ 88.254325] HM1375 sensor_detect OK
1010
非常没帮助
没帮助
一般
有帮助
非常有帮助
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
