Nginx的配置文件 nginx.conf
include modules-enabled/*.conf; # 引入其他子配置文件
user nginx nginx ; # Nginx用户及组。默认: nobody nobody。window下不指定
worker_processes auto; # 工作进程数目。根据硬件调整,通常等于CPU数量或者2倍于CPU。默认为1。理论上nginx最大连接数 = worker_processes * worker_connections
error_log logs/error.log; # 错误日志存放路径 默认 logs/error.log error
error_log logs/error.log notice;
error_log logs/error.log info;
pid logs/nginx.pid; # pid(进程标识符)文件存放路径。
worker_rlimit_nofile 204800; # 一个nginx进程打开的最多文件描述符数目,理论值应该是最多打开文件数(ulimit -n)与nginx进程数相除,但是nginx调度时分配请求到进程并不是那么的均衡,假如填写10240,总并发量达到3-4万时就有进程可能超过10240了,所以最好与ulimit -n 的值保持一致。应该大于worker_connections。默认没限制。
events {
use epoll; # 使用epoll的I/O 模型。linux建议epoll,FreeBSD建议采用kqueue,window下不指定。后有补充说明。
worker_connections 204800; # 每个工作进程的最大连接数量。根据硬件调整,和前面工作进程配合起来用,尽量大,但是别把cpu跑到100%就行。小于worker_rlimit_nofile
keepalive_timeout 60; # keepalive超时时间。
client_header_buffer_size 4k; #客户端请求头部的缓冲区大小。这个可以根据你的系统分页大小来设置,一般一个请求头的大小不会超过1k,不过由于一般系统分页都要大于1k,所以这里设置为分页大小。分页大小可以用命令 getconf PAGESIZE 取得。但也有client_header_buffer_size超过4k的情况,但是client_header_buffer_size该值必须设置为“系统分页大小”的整倍数。
open_file_cache max=65535 inactive=60s; # 这个将为打开文件指定缓存,默认是没有启用的,max指定缓存数量,建议和打开文件数一致,inactive是指经过多长时间文件没被请求后删除缓存。
open_file_cache_valid 80s; #这个是指多长时间检查一次缓存的有效信息。
open_file_cache_min_uses 1; #open_file_cache指令中的inactive参数时间内文件的最少使用次数,如果超过这个数字,文件描述符一直是在缓存中打开的,如上例,如果有一个文件在inactive时间内一次没被使用,它将被移除。
}
## 设定http服务器,利用它的反向代理功能提供负载均衡支持
http {
include mime.types; # 设定mime类型,类型由mime.type文件定义。默认值 application/octet-stream;
#日志格式设置。
log_format main '$remote_addr - $remote_user [$time_local] "$request" '
'$status $body_bytes_sent "$http_referer" '
'"$http_user_agent" "$http_x_forwarded_for"';
access_log logs/host.access.log main; # 指定日志文件的存放路径;
access_log logs/host.access.404.log log404;
server_names_hash_bucket_size 128; # 保存服务器名字的hash表是由指令server_names_hash_max_size 和server_names_hash_bucket_size所控制的。参数hash bucket size总是等于hash表的大小,并且是一路处理器缓存大小的倍数。在减少了在内存中的存取次数后,使在处理器中加速查找hash表键值成为可能。如果hash bucket size等于一路处理器缓存的大小,那么在查找键的时候,最坏的情况下在内存中查找的次数为2。第一次是确定存储单元的地址,第二次是在存储单元中查找键 值。因此,如果Nginx给出需要增大hash max size 或 hash bucket size的提示,那么首要的是增大前一个参数的大小. ?
client_header_buffer_size 4k; #客户端请求头部的缓冲区大小。这个可以根据你的系统分页大小来设置,一般一个请求的头部大小不会超过1k,不过由于一般系统分页都要大于1k,所以这里设置为分页大小。分页大小可以用命令getconf PAGESIZE取得。
large_client_header_buffers 8 128k; # 客户请求头缓冲大小。nginx默认会用client_header_buffer_size这个buffer来读取header值,如果header过大,它会使用large_client_header_buffers来读取。
open_file_cache max=102400 inactive=20s; # 指定缓存是否启用。
open_file_cache_errors on; # 指定是否在搜索一个文件时记录cache错误。语法:open_file_cache_errors on | off 默认值:off。 使用字段:http, server, location
open_file_cache_min_uses 2; # 指定在open_file_cache指令无效的参数中一定的时间范围内可以使用的最小文件数,如果使用更大的值,文件描述符在cache中总是打开状态. 默认值1。 使用字段:http, server, location
open_file_cache_valid 30s; # 指定何时需要检查open_file_cache中缓存项目的有效信息. 默认值60。 使用字段:http, server, location
client_max_body_size 300m; # 设定通过nginx上传文件的大小
sendfile on; # 指定 nginx 是否调用sendfile 函数(zero copy 方式)来输出文件,对于普通应用,必须设为on。如果用来进行下载等应用磁盘IO重负载应用,可设置为off,以平衡磁盘与网络IO处理速度,降低系统uptime。
tcp_nopush on; # 允许或禁止使用socke的TCP_CORK的选项,此选项仅在使用sendfile的时候使用
proxy_connect_timeout 90; # 后端服务器连接的超时时间_发起握手等候响应超时时间
proxy_read_timeout 180; #连接成功后_等候后端服务器响应时间_其实已经进入后端的排队之中等候处理(也可以说是后端服务器处理请求的时间)
proxy_send_timeout 180; # 后端服务器数据回传时间_就是在规定时间之内后端服务器必须传完所有的数据
proxy_buffer_size 256k; # 设置从被代理服务器读取的第一部分应答的缓冲区大小,通常情况下这部分应答中包含一个小的应答头,默认情况下这个值的大小为指令proxy_buffers中指定的一个缓冲区的大小,不过可以将其设置为更小
proxy_buffers 4 256k; # 设置用于读取应答(来自被代理服务器)的缓冲区数目和大小,默认情况也为分页大小,根据操作系统的不同可能是4k或者8k
proxy_busy_buffers_size 256k;
proxy_temp_file_write_size 256k; # 设置在写入proxy_temp_path时数据的大小,预防一个工作进程在传递文件时阻塞太长
proxy_temp_path /data0/proxy_temp_dir; # proxy_temp_path和proxy_cache_path指定的路径必须在同一分区
proxy_cache_path /data0/proxy_cache_dir levels=1:2 keys_zone=cache_one:200m inactive=1d max_size=30g; # 设置内存缓存空间大小为200MB,1天没有被访问的内容自动清除,硬盘缓存空间大小为30GB。
keepalive_timeout 120; # keepalive超时时间。
tcp_nodelay on;
client_body_buffer_size 512k; # 如果把它设置为比较大的数值,例如256k,那么,无论使用firefox还是IE浏览器,来提交任意小于256k的图片,都很正常。如果注释该指令,使用默认的client_body_buffer_size设置,也就是操作系统页面大小的两倍,8k或者16k,问题就出现了。
无论使用firefox4.0还是IE8.0,提交一个比较大,200k左右的图片,都返回500 Internal Server Error错误
proxy_intercept_errors on;# 表示使nginx阻止HTTP应答代码为400或者更高的应答。
upstream bakend { # 定义负载均衡设备的Ip及设备状态,详见下
server 127.0.0.1:8027;
server 127.0.0.1:8028;
server 127.0.0.1:8029;
hash $request_uri;
}
server{ # 配置虚拟机
listen 80; # 配置监听端口
server_name image.***.com; #配置访问域名
# location 对URL进行匹配.可以进行重定向或者进行新的代理 负载均衡
location ~* \.(mp3|exe)$ { # 对以“mp3或exe”结尾的地址进行负载均衡
proxy_pass http://img_relay$request_uri; # 设置被代理服务器的端口或套接字,以及URL
proxy_set_header Host $host; # 一下三行的目的是将代理服务器收到的用户的信息传到真实服务器上
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
}
location /face {
if ($http_user_agent ~* "xnp") {
rewrite ^(.*)$ http://211.151.188.190:8080/face.jpg redirect;
}
proxy_pass http://img_relay$request_uri;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
error_page 404 502 = @fetch;
}
location @fetch {
access_log /data/logs/face.log log404;
rewrite ^(.*)$ http://211.151.188.190:8080/face.jpg redirect;
}
location /image {
if ($http_user_agent ~* "xnp") {
rewrite ^(.*)$ http://211.151.188.190:8080/face.jpg redirect;
}
proxy_pass http://img_relay$request_uri;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
error_page 404 502 = @fetch;
}
location @fetch {
access_log /data/logs/image.log log404;
rewrite ^(.*)$ http://211.151.188.190:8080/face.jpg redirect;
}
}
}
补充说明:
event 事件模型
与apache相类,nginx针对不同的操作系统,有不同的事件模型
- 标准事件模型
select、poll属于标准事件模型,如果当前系统不存在更有效的方法,nginx会选择select或poll - 高效事件模型
kqueue:使用于FreeBSD 4.1+, OpenBSD 2.9+, NetBSD 2.0 和 MacOS X.使用双处理器的MacOS X系统使用kqueue可能会造成内核崩溃。
epoll:使用于Linux内核2.6版本及以后的系统。
/dev/poll:使用于Solaris 7 11/99+,HP/UX 11.22+ (eventport),IRIX 6.5.15+ 和 Tru64 UNIX 5.1A+。
eventport:使用于Solaris 10。 为了防止出现内核崩溃的问题, 有必要安装安全补丁
日志格式
log_format main '$remote_addr - $remote_user [$time_local] "$request" '
'$status $body_bytes_sent "$http_referer" '
'"$http_user_agent" "$http_x_forwarded_for"';
$remote_addr与$http_x_forwarded_for用以记录客户端的ip地址;
$remote_user:用来记录客户端用户名称;
$time_local: 用来记录访问时间与时区;
$request: 用来记录请求的url与http协议;
$status: 用来记录请求状态;成功是200,
$body_bytes_sent :记录发送给客户端文件主体内容大小;
$http_referer:用来记录从那个页面链接访问过来的;
$http_user_agent:记录客户浏览器的相关信息;
通常web服务器放在反向代理的后面,这样就不能获取到客户的IP地址了,通过$remote_addr拿到的IP地址是反向代理服务器的iP地址。反向代理服务器在转发请求的http头信息中,可以增加http_x_forwarded_for信息,用以记录原有客户端的IP地址和原来客户端的请求的服务器地址。
upstream
upstream bakend{
ip_hash;
server 127.0.0.1:9090 down; # down表示当前的server暂时不参与负载
server 127.0.0.1:8080 weight=2; # weight越大,负载的权重就越大
server 127.0.0.1:6060;
server 127.0.0.1:7070 backup; # 其它所有的非backup机器down或者忙的时候,请求backup机器。所以这台机器压力会最轻
}
目前支持5种方式的分配
- 轮询(默认): 每个请求按时间顺序逐一分配到不同的后端服务器,如果后端服务器down掉,能自动剔除。
- weight: 指定轮询几率,weight和访问比率成正比,用于后端服务器性能不均的情况。
upstream bakend {
server 192.168.0.14 weight=10;
server 192.168.0.15 weight=10;
}
- ip_hash: 每个请求按访问ip的hash结果分配,这样每个访客固定访问一个后端服务器,可以解决session的问题。
upstream bakend {
ip_hash;
server 192.168.0.14:88;
server 192.168.0.15:80;
}
- fair(第三方): 按后端服务器的响应时间来分配请求,响应时间短的优先分配。
upstream backend {
server server1;
server server2;
fair;
}
- url_hash(第三方): 按访问url的hash结果来分配请求,使每个url定向到同一个后端服务器,后端服务器为缓存时比较有效。
upstream backend {
server squid1:3128;
server squid2:3128;
hash $request_uri; # 在upstream中加入hash语句,server语句中不能写入weight等其他的参数,
hash_method crc32; # 使用的hash算法
}
nginx支持同时设置多组的负载均衡,用来给不同的server来使用。
server举例
server {
listen 80;
server_name *.***.com *.***.cn;
location ~* \.(mp3|exe)$ {
proxy_pass http://img_relay$request_uri;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
}
location / {
if ($http_user_agent ~* "xnp") {
rewrite ^(.*)$ http://i1.***img.com/help/noimg.gif redirect;
}
proxy_pass http://img_relay$request_uri;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
#error_page 404 http://i1.***img.com/help/noimg.gif;
error_page 404 502 = @fetch;
}
location @fetch {
access_log /data/logs/baijiaqi.log log404;
rewrite ^(.*)$ http://i1.***img.com/help/noimg.gif redirect;
}
}
server {
listen 80;
server_name *.***img.com;
location ~* \.(mp3|exe)$ {
proxy_pass http://img_relay$request_uri;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
}
location / {
if ($http_user_agent ~* "xnp") {
rewrite ^(.*)$ http://i1.***img.com/help/noimg.gif;
}
proxy_pass http://img_relay$request_uri;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
#error_page 404 http://i1.***img.com/help/noimg.gif;
error_page 404 = @fetch;
}
#access_log off;
location @fetch {
access_log /data/logs/baijiaqi.log log404;
rewrite ^(.*)$ http://i1.***img.com/help/noimg.gif redirect;
}
}
server {
listen 8080;
server_name ngx-ha.***img.com;
location / {
stub_status on;
access_log off;
}
}
server {
listen 80;
server_name imgsrc1.***.net;
root html;
}
server {
listen 80;
server_name ***.com w.***.com;
# access_log /usr/local/nginx/logs/access_log main;
location / {
rewrite ^(.*)$ http://www.***.com/ ;
}
}
server {
listen 80;
server_name *******.com w.*******.com;
# access_log /usr/local/nginx/logs/access_log main;
location / {
rewrite ^(.*)$ http://www.*******.com/;
}
}
server {
listen 80;
server_name ******.com;
# access_log /usr/local/nginx/logs/access_log main;
location / {
rewrite ^(.*)$ http://www.******.com/;
}
}
location /NginxStatus {
stub_status on;
access_log on;
auth_basic "NginxStatus";
auth_basic_user_file conf/htpasswd;
}
#设定查看Nginx状态的地址
location ~ /\.tb {
deny all;
}
}
变量
ngx_http_core_module模块支持内置变量,他们的名字和apache的内置变量是一致的。
首先是说明客户请求title中的行,例如 $http_user_agent , $http_cookie等等。
此外还有其它的一些变量
$args 此变量与请求行中的参数相等
$content_length 等于请求行的“Content_Length”的值。
$content_type 等同与请求头部的”Content_Type”的值
$document_root 等同于当前请求的root指令指定的值
$document_uri与$uri一样
$host 与请求头部中“Host”行指定的值或是request到达的server的名字(没有Host行)一样
$limit_rate 允许限制的连接速率
$request_method 等同于request的method,通常是“GET”或“POST”
$remote_addr 客户端ip
$remote_port 客户端port
$remote_use r等同于用户名,由ngx_http_auth_basic_module认证
$request_filename 当前请求的文件的路径名,由root或alias和URI request组合而成
$request_body_file
$request_uri 含有参数的完整的初始URI
$query_string与$args一样
$sheeme http 模式(http,https)尽在要求是评估例如
Rewrite ^(.+)$ $sheme://example.com$; Redirect;
$server_protocol 等同于request的协议,使用“HTTP/或“HTTP/
$server_addr request 到达的server的ip,一般获得此变量的值的目的是进行系统调用。为了避免系统调用,有必要在listen指令中指明ip,并使用bind参数。
$server_name 请求到达的服务器名
$server_port 请求到达的服务器的端口号
$uri 等同于当前request中的URI,可不同于初始值,例如内部重定向时或使用index
location匹配规则
- 以=开头表示精确匹配
- ^~ 匹配普通字符,不是正则匹配不能用正则表达式
- ~ 开头表示区分大小写的正则匹配;
- ~* 开头表示不区分大小写的正则匹配
- / 通用匹配, 如果没有其它匹配,任何请求都会匹配到
location = / {
# 精确匹配 / ,主机名后面不能带任何字符串
}
location / {
# 因为所有的地址都以 / 开头,所以这条规则将匹配到所有请求
# 但是正则和最长字符串会优先匹配
}
location /documents/ {
# 匹配任何以 /documents/ 开头的地址,优先级比较低 [ configuration C ]
}
location ~ /documents/Abc {
# 匹配任何以 /documents/ 开头的地址,匹配符合以后,还要继续往下搜索
# 只有后面的正则表达式没有匹配到时,这一条才会采用这一条
}
location ^~ /images/ {
# 匹配任何以 /images/ 开头的地址,匹配符合以后,停止往下搜索正则,采用这一条。
}
location ~* \.(gif|jpg|jpeg)$ {
# 匹配所有以 gif,jpg或jpeg 结尾的请求
# 然而,所有请求 /images/ 下的图片会被 config D 处理,因为 ^~ 到达不了这一条正则
}
location /images/ {
# 字符匹配到 /images/,继续往下,会发现 ^~ 存在
[ configuration F ]
}
location ~* /js/.*/\.js