项目数据库为MongoDB,分片DB,每个片为一个复制集,每复制集三台DB,
现在需给其中一个复制集增加一台DB,先把用到的资料贴上来,等有时间了再
整理:
Add Members to a Replica Set --Production Notes
If you have a backup or snapshot of an existing member, you can move the data files (i.e. /data/db or dbpath) to a new system and use them to quickly initiate a new member. These files must be:
1. clean: the existing dataset must be from a consistent copy of the database from a member of the same replica set. See the Backup and Restoration Strategies document for more information.
http://docs.mongodb.org/manual/administration/backups/
2. recent: the copy must more recent than the oldest operation in the primary member’s oplog. The new secondary must be able to become current using operations from the primary’s oplog.
-------------------------------------------------------------------------------------------
Creating a slave from an existing master's disk image
If you can stop write operations to the master for an indefinite period, you can copy the data files from the master to the new slave, and then start the slave with --fastsync .
![]() | Be careful with --fastsync. If the data is not perfectly in sync, a discrepancy will exist forever. |
--fastsync is a way to start a slave starting with an existing master disk image/backup. This option declares that the adminstrator guarantees the image is correct and completely up to date with that of the master. If you have a full and complete copy of data from a master you can use this option to avoid a full synchronization upon starting the slave.
/
Would like to get documentation for the --fastsync feature. My hope is the ability to make raw file system copies to seed slaves, then tell the slave where to "pick up" reads from the oplog. This would make deploying slaves much faster than performing a initial sync, especially when there is a slow connection between master/slave (i.e. across data centers).
//
Yes. --fastsync is a way to speed up the sync when you have a recent
copy of all the data and oplog
On Feb 24, 3:06Âpm, tetlika <tetl...@xxxxxxxxx> wrote:
> ah ok
>
> I think i understood: fast resync is used just when we have a copy of
> data - including oplogs - it just tells not to do a full resync
>
> when we dont use fastresync all data will be synced, not depending on
> oplog
>
> On 25 ÑÐÐ, 00:55, sridhar <srid...@xxxxxxxxx> wrote:
>
>
>
>
>
>
>
> > fastsync does not replay all the oplog. It only replays the necessary
> > entries post where your database is at. If your oplog is not big
> > enough and has rolled over, fastsync falls back to a full resync.
>
> > On Feb 24, 2:49Âpm, tetlika <tetl...@xxxxxxxxx> wrote:
>
> > > Hi!
>
> > > According to
> > > thehttp://www.mongodb.org/display/DOCS/Adding+a+New+Set+Member
> > > fastsync is just "replaying" ALL Âoplog on the new slave, so if we
> > > dont have the oplog Âbig enough - we need copy data to the new slave
> > > and run it with the fastsync option?
Creating a slave from an existing slave's disk image
You can just copy the other slave's data file snapshot without any special options. Note data snapshots should only be taken when a mongod process is down or in fsync-and-lock state.
Sharded Cluster and Replica Set Considerations
The underlying architecture of sharded clusters and replica sets presents several challenges for creating backups. This section describes how to make quality backups in environments with these configurations and how to perform restorations.
Back Up Sharded Clusters
Sharding complicates backup operations, because it is impossible to create a backup of a single moment in time from a distributed cluster of systems and processes.
Depending on the size of your data, you can back up the cluster as a whole or back up each mongod instance. The following section describes both procedures.
Back Up the Cluster as a Whole Using mongodump
If your sharded cluster comprises a small collection of data, you can connect to a mongos and issue the mongodump command. You can use this approach if the following is true:
- It’s possible to store the entire backup on one system or on a single storage device. Consider both backups of entire instances and incremental dumps of data.
- The state of the database at the beginning of the operation is not significantly different than the state of the database at the end of the backup. If the backup operation cannot capture a backup, this is not a viable option.
- The backup can run and complete without affecting the performance of the cluster.
Note
If you use mongodump without specifying the a database or collection, the output will contain both the collection data and the sharding config metadata from the config servers .
You cannot use the --oplog option for mongodump when dumping from a mongos . This option is only available when running directly against a replica set member.
Back Up from All Database Instances
If your sharded cluster is to large for the mongodump command, then you must back up your data either by creating a snapshot of the cluster or by creating a binary dump of each database. This section describes both.
In both cases:
- The backups must capture the database in a consistent state.
- The sharded cluster must be consistent in itself.
This procedure describes both approaches:
-
Disable the balancer process that equalizes the distribution of data among the shards . To disable the balancer, use the sh.stopBalancer() method in the mongo shell, and see the Disable the Balancer procedure.
Warning
It is essential that you stop the balancer before creating backups. If the balancer remains active, your resulting backups could have duplicate data or miss some data, as chunks migrate while recording backups.
-
Lock one member of each replica set in shard so that your backups reflect your entire database system at a single point in time. Lock all shards in as short of an interval as possible.
To lock or freeze a sharded cluster, you must:
- use the db.fsyncLock() method in the mongo shell connected to each shard mongod instance and block write operations.
- Shutdown one of the config servers , to prevent all metadata changes during the backup process.
-
Use mongodump to backup one of the config servers . This backs up the cluster’s metadata. You only need to back up one config server, as they all have replicas of the same information.
Issue this command against one of the config server itself or the mongos :
mongodump --db config
-
Back up the replica set members of the shards that you locked. You may back up shards one at a time or in parallel. For each shard, do one of the following:
- If your system has disk level snapshot capabilities, create a snapshot each shard. Use the procedures in Using Block Level Backup Methods .
- Create a binary dump of each shard using the operations described in Using Binary Database Dumps for Backups .
-
Unlock all locked replica set members of each shard using the db.fsyncUnlock() method in the mongo shell.
-
Restore the balancer with the sh.startBalancer() method according to the Disable the Balancer procedure.
Use the following command sequence when connected to the mongos with the mongo shell:
use config sh . startBalancer ()
Schedule Automated Backups
If you have an automated backup schedule, you can disable all balancing operations for a period of time. For instance, consider the following command:
use
config
db
.
settings
.
update
(
{
_id
:
"balancer"
},
{
$set
:
{
activeWindow
:
{
start
:
"6:00"
,
stop
:
"23:00"
}
}
},
true
)
This operation configures the balancer to run between 6:00 am and 11:00pm, server time. Schedule your backup operation to run and complete in this time. Ensure that the backup can complete during the window when the balancer is running and that the balancer can effectively balance the collection among the shards in the window allotted to each.
Restore Sharded Clusters
-
Stop all mongod and mongos processes.
-
If shard hostnames have changed, you must manually update the shards collection in the Config Database Contents to use the new hostnames. Do the following:
-
Start the three config servers by issuing commands similar to the following, using values appropriate to your configuration:
mongod --configsvr --dbpath /data/configdb --port 27018
-
Restore the Config Database Contents on each config server.
-
Start one mongos instance.
-
Update the Config Database Contents collection named shards to reflect the new hostnames.
-
-
Restore the following:
- Data files for each server in each shard . Because replica sets provide each production shard, restore all the members of the replica set or use the other standard approaches for restoring a replica set from backup.
- Data files for each config server , if you have not already done so in the previous step.
-
Restart the all the mongos instances.
-
Restart all the mongod instances.
-
Connect to a mongos instance from a mongo shell and run use the db.printShardingStatus() method to ensure that the cluster is operational, as follows:
db . printShardingStatus () show collections
Restore a Single Shard
Always restore sharded clusters as a whole. When you restore a single shard, keep in mind that the balancer process might have moved chunks onto or off of this shard since the last backup. If that’s the case, you must manually move those chunks, as described in this procedure.
- Restore the shard.
- For all chunks that migrated away from this shard, you need not do anything. You do not need to delete these documents from the shard because the chunks are automatically filtered out from queries by mongos .
- For chunks that migrated to this shard since the last backup, you must manually recover the chunks. To determine what chunks have moved, view the changelog collection in the Config Database Contents .
Replica Sets
In most cases, backing up data stored in a replica set is similar to backing up data stored in a single instance. It’s possible to lock a single secondary or slave database and then create a backup from that instance. When you unlock the database, the secondary or slave will catch up with the primary or master . You may also chose to deploy a dedicated hidden member for backup purposes.
If you have a sharded cluster where each shard is itself a replica set, you can use this method to create a backup of the entire cluster without disrupting the operation of the node. In these situations you should still turn off the balancer when you create backups.
For any cluster, using a non-primary/non-master node to create backups is particularly advantageous in that the backup operation does not affect the performance of the primary or master. Replication itself provides some measure of redundancy. Nevertheless, keeping point-in time backups of your cluster to provide for disaster recovery and as an additional layer of protection is crucial.