tp_smapi用于控制电池充电和提供额外的电池信息。
参考页面:http://www.thinkwiki.org/wiki/Tp_smapi#Battery_charge_control_features
Ubuntu集成这个软件自从Hardy以后的版本, 可以直接使用,无需安装。
电池充电控制
设置开始与停止充电的阀值(百分比)
-
# echo 40 > /sys/devices/platform/smapi/BAT0/start_charge_thresh
-
# echo 70 > /sys/devices/platform/smapi/BAT0/stop_charge_thresh
-
# cat /sys/devices/platform/smapi/BAT0/*_charge_thresh
(表示低于40%时开始充电,高于70%就停止)
设置禁止充电时间
17分内防止充电到BAT0(首选电池):
-
# echo 17 > /sys/devices/platform/smapi/BAT0/inhibit_charge_minutes
取消禁止充电:
-
# echo 0 > /sys/devices/platform/smapi/BAT0/inhibit_charge_minutes
强制禁止充电(即使接AC):
-
# echo 1 > /sys/devices/platform/smapi/BAT0/force_discharge
取消强制禁止充电:
-
# echo 0 > /sys/devices/platform/smapi/BAT0/force_discharge
显示电池状态信息
显示额外的电池状态,比如充电情况、电压、电流、容量、充电次数和型号信息:
# cat /sys/devices/platform/smapi/BAT0/installed
# cat /sys/devices/platform/smapi/BAT0/state # idle/charging/discharging
# cat /sys/devices/platform/smapi/BAT0/cycle_count
# cat /sys/devices/platform/smapi/BAT0/current_now # instantaneous current
# cat /sys/devices/platform/smapi/BAT0/current_avg # last minute average
# cat /sys/devices/platform/smapi/BAT0/power_now # instantaneous power
# cat /sys/devices/platform/smapi/BAT0/power_avg # last minute average
# cat /sys/devices/platform/smapi/BAT0/last_full_capacity
# cat /sys/devices/platform/smapi/BAT0/remaining_percent
# cat /sys/devices/platform/smapi/BAT0/remaining_running_time
# cat /sys/devices/platform/smapi/BAT0/remaining_charging_time
# cat /sys/devices/platform/smapi/BAT0/remaining_capacity
# cat /sys/devices/platform/smapi/BAT0/design_capacity
# cat /sys/devices/platform/smapi/BAT0/voltage
# cat /sys/devices/platform/smapi/BAT0/design_voltage
# cat /sys/devices/platform/smapi/BAT0/manufacturer
# cat /sys/devices/platform/smapi/BAT0/model
# cat /sys/devices/platform/smapi/BAT0/barcoding
# cat /sys/devices/platform/smapi/BAT0/chemistry
# cat /sys/devices/platform/smapi/BAT0/serial
# cat /sys/devices/platform/smapi/BAT0/manufacture_date
# cat /sys/devices/platform/smapi/BAT0/first_use_date
# cat /sys/devices/platform/smapi/BAT0/temperature # in milli-Celsius
# cat /sys/devices/platform/smapi/ac_connected