[b]一,大硬盘挂载[/b]
1 查看所有的磁盘
2 设置磁盘
3 格式化硬盘
4 自动挂载
加入以下信息
/dev/sdb1 /mnt/kfs ext3 defaults 0 2
注意挂盘的时候一定要挂自己建立的文件目录,这样才可以很随意的换硬盘
[b]二 修复了Ubuntu 变成了只读文件系统的错误[/b]
发现修改/etc/fstab,提示只读文件系统,:w!也失败。
运行以下语句即可
[b]三 SSH 配置互通[/b]
只需修改 authorized_keys 的IP 为 192.168.1.*即可达到通配的效果
1 查看所有的磁盘
sudo fdisk -l |more
2 设置磁盘
sudo fdisk /dev/sdb
-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u')
WARNING : DOS
Command (m for help):c <enter>
DOS Compatibility flag is not set (不兼容DOS的模式,如果不用这个模式不能把硬盘设置成1T以上的)
Command (m for help): m <enter>
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
Command (m for help):n <enter>
Command action
e extended
p primary partition (1-4)
p <enter>
Partition number (1-4):
1 <enter>
Command (m for help):w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
3 格式化硬盘
sudo mke2fs -t ext3 /dev/sdb1
4 自动挂载
sudo nano /etc/fstab
加入以下信息
/dev/sdb1 /mnt/kfs ext3 defaults 0 2
注意挂盘的时候一定要挂自己建立的文件目录,这样才可以很随意的换硬盘
[b]二 修复了Ubuntu 变成了只读文件系统的错误[/b]
发现修改/etc/fstab,提示只读文件系统,:w!也失败。
运行以下语句即可
mount /dev/sda1 / -o rw,remount
[b]三 SSH 配置互通[/b]
只需修改 authorized_keys 的IP 为 192.168.1.*即可达到通配的效果