在并发编程中很常用的实用工具类

中的一个亮点就是将Doug Lea的并发库引入到Java标准库中。Doug Lea确实是一个牛人,能教书,能出书,能编码,不过这在国外还是比较普遍的,而国内的教授们就相差太远了。  


一般的服务器都需要线程池,比如Web、FTP等服务器,不过它们一般都自己实现了线程池,比如以前介绍过的Tomcat、Resin和Jetty等,现在有了JDK5,我们就没有必要重复造车轮了,直接使用就可以,何况使用也很方便,性能也非常高。


Java代码


[*]package concurrent;

[*]import java.util.concurrent.ExecutorService;

[*]import java.util.concurrent.Executors;

[*]public class TestThreadPool {

[*]public static void main(String args[]) throws InterruptedException {

[*]// only two threads

[*]ExecutorService exec = Executors.newFixedThreadPool(2);

[*]for(int index = 0; index 100; index++) {

[*]Runnable run = new Runnable() {

[*]public void run() {

[*]long time = (long) (Math.random() * 1000);

[*]System.out.println(“Sleeping ” + time + “ms”);

[*]try {

[*]Thread.sleep(time);

[*]} catch (InterruptedException e) {

[*]}

[*]}

[*]};

[*]exec.execute(run);

[*]}

[*]// must shutdown

[*]exec.shutdown();

[*]}

[*]}


上面是一个简单的例子,使用了2个大小的线程池来处理100个线程。但有一个问题:在for循环的过程中,会等待线程池有空闲的线程,所以主线程会阻塞的。为了解决这个问题,一般启动一个线程来做for循环,就是为了避免由于线程池满了造成主线程阻塞。不过在这里我没有这样处理。[重要修正:经过测试,即使线程池大小小于实际线程数大小,线程池也不会阻塞的,这与Tomcat的线程池不同,它将Runnable实例放到一个“无限”的BlockingQueue中,所以就不用一个线程启动for循环,Doug Lea果然厉害]


另外它使用了Executors的静态函数生成一个固定的线程池,顾名思义,线程池的线程是不会释放的,即使它是Idle。这就会产生性能问题,比如如果线程池的大小为200,当全部使用完毕后,所有的线程会继续留在池中,相应的内存和线程切换(while(true)+sleep循环)都会增加。如果要避免这个问题,就必须直接使用ThreadPoolExecutor()来构造。可以像Tomcat的线程池一样设置“最大线程数”、“最小线程数”和“空闲线程keepAlive的时间”。通过这些可以基本上替换Tomcat的线程池实现方案。

需要注意的是线程池必须使用shutdown来显式关闭,否则主线程就无法退出。shutdown也不会阻塞主线程。

许多长时间运行的应用有时候需要定时运行任务完成一些诸如统计、优化等工作,比如在电信行业中处理用户话单时,需要每隔1分钟处理话单;网站每天凌晨统计用户访问量、用户数;大型超时凌晨3点统计当天销售额、以及最热卖的商品;每周日进行数据库备份;公司每个月的10号计算工资并进行转帐等,这些都是定时任务。通过 java的并发库concurrent可以轻松的完成这些任务,而且非常的简单。


Java代码


[*]package concurrent;

[*]import static java.util.concurrent.TimeUnit.SECONDS;

[*]import java.util.Date;

[*]import java.util.concurrent.Executors;

[*]import java.util.concurrent.ScheduledExecutorService;

[*]import java.util.concurrent.ScheduledFuture;

[*]public class TestScheduledThread {

[*]public static void main(String[] args) {

[*]final ScheduledExecutorService scheduler = Executors

[*].newScheduledThreadPool(2);

[*]final Runnable beeper = new Runnable() {

[*]int count = 0;

[*]public void run() {

[*]System.out.println(new Date() + ” beep ” + (++count));

[*]}

[*]};

[*]// 1秒钟后运行,并每隔2秒运行一次

[*]final ScheduledFuture beeperHandle = scheduler.scheduleAtFixedRate(

[*]beeper, 1, 2, SECONDS);

[*]// 2秒钟后运行,并每次在上次任务运行完后等待5秒后重新运行

[*]final ScheduledFuture beeperHandle2 = scheduler

[*].scheduleWithFixedDelay(beeper, 2, 5, SECONDS);

[*]// 30秒后结束关闭任务,并且关闭Scheduler

[*]scheduler.schedule(new Runnable() {

[*]public void run() {

[*]beeperHandle.cancel(true);

[*]beeperHandle2.cancel(true);

[*]scheduler.shutdown();

[*]}

[*]}, 30, SECONDS);

[*]}

[*]}


为了退出进程,上面的代码中加入了关闭Scheduler的操作。而对于24小时运行的应用而言,是没有必要关闭Scheduler的。


在实际应用中,有时候需要多个线程同时工作以完成同一件事情,而且在完成过程中,往往会等待其他线程都完成某一阶段后再执行,等所有线程都到达某一个阶段后再统一执行。

比如有几个旅行团需要途经深圳、广州、韶关、长沙最后到达武汉。旅行团中有自驾游的,有徒步的,有乘坐旅游大巴的;这些旅行团同时出发,并且每到一个目的地,都要等待其他旅行团到达此地后再同时出发,直到都到达终点站武汉。

这时候CyclicBarrier就可以派上用场。CyclicBarrier最重要的属性就是参与者个数,另外最要方法是await()。当所有线程都调用了await()后,就表示这些线程都可以继续执行,否则就会等待。


Java代码


[*]package concurrent;

[*]import java.text.SimpleDateFormat;

[*]import java.util.Date;

[*]import java.util.concurrent.BrokenBarrierException;

[*]import java.util.concurrent.CyclicBarrier;

[*]import java.util.concurrent.ExecutorService;

[*]import java.util.concurrent.Executors;

[*]public class TestCyclicBarrier {

[*]// 徒步需要的时间: Shenzhen, Guangzhou, Shaoguan, Changsha, Wuhan

[*]private static int[] timeWalk = { 5, 8, 15, 15, 10 };

[*]// 自驾游

[*]private static int[] timeSelf = { 1, 3, 4, 4, 5 };

[*]// 旅游大巴

[*]private static int[] timeBus = { 2, 4, 6, 6, 7 };

[*]

[*]static String now() {

[*]SimpleDateFormat sdf = new SimpleDateFormat(“HH:mm:ss”);

[*]return sdf.format(new Date()) + “: “;

[*]}

[*]

[*]static class Tour implements Runnable {

[*]private int[] times;

[*]private CyclicBarrier barrier;

[*]private String tourName;

[*]public Tour(CyclicBarrier barrier, String tourName, int[] times) {

[*]this.times = times;

[*]this.tourName = tourName;

[*]this.barrier = barrier;

[*]}

[*]public void run() {

[*]try {

[*]Thread.sleep(times[0] * 1000);

[*]System.out.println(now() + tourName + ” Reached Shenzhen”);

[*]barrier.await();

[*]Thread.sleep(times[1] * 1000);

[*]System.out.println(now() + tourName + ” Reached Guangzhou”);

[*]barrier.await();

[*]Thread.sleep(times[2] * 1000);

[*]System.out.println(now() + tourName + ” Reached Shaoguan”);

[*]barrier.await();

[*]Thread.sleep(times[3] * 1000);

[*]System.out.println(now() + tourName + ” Reached Changsha”);

[*]barrier.await();

[*]Thread.sleep(times[4] * 1000);

[*]System.out.println(now() + tourName + ” Reached Wuhan”);

[*]barrier.await();

[*]} catch (InterruptedException e) {

[*]} catch (BrokenBarrierException e) {

[*]}

[*]}

[*]}

[*]

[*]public static void main(String[] args) {

[*]// 三个旅行团

[*]CyclicBarrier barrier = new CyclicBarrier(3);

[*]ExecutorService exec = Executors.newFixedThreadPool(3);

[*]exec.submit(new Tour(barrier, “WalkTour”, timeWalk));

[*]exec.submit(new Tour(barrier, “SelfTour”, timeSelf));

[*]exec.submit(new Tour(barrier, “BusTour”, timeBus));

[*]exec.shutdown();

[*]}

[*]}


运行结果:
00:02:25: SelfTour Reached Shenzhen
00:02:25: BusTour Reached Shenzhen
00:02:27: WalkTour Reached Shenzhen
00:02:30: SelfTour Reached Guangzhou
00:02:31: BusTour Reached Guangzhou
00:02:35: WalkTour Reached Guangzhou
00:02:39: SelfTour Reached Shaoguan
00:02:41: BusTour Reached Shaoguan


并发库中的BlockingQueue是一个比较好玩的类,顾名思义,就是阻塞队列。该类主要提供了两个方法put()和take(),前者将一个对象放到队列中,如果队列已经满了,就等待直到有空闲节点;后者从head取一个对象,如果没有对象,就等待直到有可取的对象。

下面的例子比较简单,一个读线程,用于将要处理的文件对象添加到阻塞队列中,另外四个写线程用于取出文件对象,为了模拟写操作耗时长的特点,特让线程睡眠一段随机长度的时间。另外,该Demo也使用到了线程池和原子整型(AtomicInteger),AtomicInteger可以在并发情况下达到原子化更新,避免使用了synchronized,而且性能非常高。由于阻塞队列的put和take操作会阻塞,为了使线程退出,特在队列中添加了一个“标识”,算法中也叫“哨兵”,当发现这个哨兵后,写线程就退出。

当然线程池也要显式退出了。


Java代码


[*]package concurrent;

[*]import java.io.File;

[*]import java.io.FileFilter;

[*]import java.util.concurrent.BlockingQueue;

[*]import java.util.concurrent.ExecutorService;

[*]import java.util.concurrent.Executors;

[*]import java.util.concurrent.LinkedBlockingQueue;

[*]import java.util.concurrent.atomic.AtomicInteger;

[*]

[*]public class TestBlockingQueue {

[*]static long randomTime() {

[*]return (long) (Math.random() * 1000);

[*]}

[*]

[*]public static void main(String[] args) {

[*]// 能容纳100个文件

[*]final BlockingQueue queue = new LinkedBlockingQueue(100);

[*]// 线程池

[*]final ExecutorService exec = Executors.newFixedThreadPool(5);

[*]final File root = new File(“F:\\JavaLib”);

[*]// 完成标志

[*]final File exitFile = new File(“”);

[*]// 读个数

[*]final AtomicInteger rc = new AtomicInteger();

[*]// 写个数

[*]final AtomicInteger wc = new AtomicInteger();

[*]// 读线程

[*]Runnable read = new Runnable() {

[*]public void run() {

[*]scanFile(root);

[*]scanFile(exitFile);

[*]}

[*]

[*]public void scanFile(File file) {

[*]if (file.isDirectory()) {

[*]File[] files = file.listFiles(new FileFilter() {

[*]public boolean accept(File pathname) {

[*]return pathname.isDirectory()

[*]|| pathname.getPath().endsWith(“.java”);

[*]}

[*]});

[*]for (File one : files)

[*]scanFile(one);

[*]} else {

[*]try {

[*]int index = rc.incrementAndGet();

[*]System.out.println(“Read0: ” + index + ” “

[*]+ file.getPath());

[*]queue.put(file);

[*]} catch (InterruptedException e) {

[*]}

[*]}

[*]}

[*]};

[*]exec.submit(read);

[*]// 四个写线程

[*]for (int index = 0; index 4; index++) {

[*]// write thread

[*]final int NO = index;

[*]Runnable write = new Runnable() {

[*]String threadName = “Write” + NO;

[*]public void run() {

[*]while (true) {

[*]try {

[*]Thread.sleep(randomTime());

[*]int index = wc.incrementAndGet();

[*]File file = queue.take();

[*]// 队列已经无对象

[*]if (file == exitFile) {

[*]// 再次添加”标志”,以让其他线程正常退出

[*]queue.put(exitFile);

[*]break;

[*]}

[*]System.out.println(threadName + “: ” + index + ” “

[*]+ file.getPath());

[*]} catch (InterruptedException e) {

[*]}

[*]}

[*]}

[*]};

[*]exec.submit(write);

[*]}

[*]exec.shutdown();

[*]}

[*]}


从名字可以看出,CountDownLatch是一个倒数计数的锁,当倒数到0时触发事件,也就是开锁,其他人就可以进入了。在一些应用场合中,需要等待某个条件达到要求后才能做后面的事情;同时当线程都完成后也会触发事件,以便进行后面的操作。


CountDownLatch最重要的方法是countDown()和await(),前者主要是倒数一次,后者是等待倒数到0,如果没有到达0,就只有阻塞等待了。

一个CountDouwnLatch实例是不能重复使用的,也就是说它是一次性的,锁一经被打开就不能再关闭使用了,如果想重复使用,请考虑使用CyclicBarrier。

下面的例子简单的说明了CountDownLatch的使用方法,模拟了100米赛跑,10名选手已经准备就绪,只等裁判一声令下。当所有人都到达终点时,比赛结束。

同样,线程池需要显式shutdown。


Java代码


[*]package concurrent;

[*]

[*]import java.util.concurrent.CountDownLatch;

[*]import java.util.concurrent.ExecutorService;

[*]import java.util.concurrent.Executors;

[*]

[*]public class TestCountDownLatch {

[*]public static void main(String[] args) throws InterruptedException {

[*]// 开始的倒数锁

[*]final CountDownLatch begin = new CountDownLatch(1);

[*]// 结束的倒数锁

[*]final CountDownLatch end = new CountDownLatch(10);

[*]// 十名选手

[*]final ExecutorService exec = Executors.newFixedThreadPool(10);

[*]for(int index = 0; index 10; index++) {

[*]final int NO = index + 1;

[*]Runnable run = new Runnable(){

[*]public void run() {

[*]try {

[*]begin.await();

[*]Thread.sleep((long) (Math.random() * 10000));

[*]System.out.println(“No.” + NO + ” arrived”);

[*]} catch (InterruptedException e) {

[*]} finally {

[*]end.countDown();

[*]}

[*]}

[*]};

[*]exec.submit(run);

[*]}

[*]System.out.println(“Game Start”);

[*]begin.countDown();

[*]end.await();

[*]System.out.println(“Game Over”);

[*]exec.shutdown();

[*]}

[*]}


运行结果:
Game Start
No.4 arrived
No.1 arrived
No.7 arrived
No.9 arrived
No.3 arrived
No.2 arrived
No.8 arrived
No.10 arrived
No.6 arrived
No.5 arrived
Game Over


有时候在实际应用中,某些操作很耗时,但又不是不可或缺的步骤。比如用网页浏览器浏览新闻时,最重要的是要显示文字内容,至于与新闻相匹配的图片就没有那么重要的,所以此时首先保证文字信息先显示,而图片信息会后显示,但又不能不显示,由于下载图片是一个耗时的操作,所以必须一开始就得下载。


Java的并发库的Future类就可以满足这个要求。Future的重要方法包括get()和cancel(),get()获取数据对象,如果数据没有加载,就会阻塞直到取到数据,而 cancel()是取消数据加载。另外一个get(timeout)操作,表示如果在timeout时间内没有取到就失败返回,而不再阻塞。

下面的Demo简单的说明了Future的使用方法:一个非常耗时的操作必须一开始启动,但又不能一直等待;其他重要的事情又必须做,等完成后,就可以做不重要的事情。


Java代码


[*]package concurrent;

[*]

[*]import java.util.concurrent.Callable;

[*]import java.util.concurrent.ExecutionException;

[*]import java.util.concurrent.ExecutorService;

[*]import java.util.concurrent.Executors;

[*]import java.util.concurrent.Future;

[*]

[*]public class TestFutureTask {

[*]public static void main(String[] args)throws InterruptedException,

[*]ExecutionException {

[*]final ExecutorService exec = Executors.newFixedThreadPool(5);

[*]Callable call = new Callable() {

[*]public String call() throws Exception {

[*]Thread.sleep(1000 * 5);

[*]return “Other less important but longtime things.”;

[*]}

[*]};

[*]Future task = exec.submit(call);

[*]// 重要的事情

[*]Thread.sleep(1000 * 3);

[*]System.out.println(“Let’s do important things.”);

[*]// 其他不重要的事情

[*]String obj = task.get();

[*]System.out.println(obj);

[*]// 关闭线程池

[*]exec.shutdown();

[*]}

[*]}


运行结果:
Let’s do important things.
Other less important but longtime things.


考虑以下场景:浏览网页时,浏览器了5个线程下载网页中的图片文件,由于图片大小、网站访问速度等诸多因素的影响,完成图片下载的时间就会有很大的不同。如果先下载完成的图片就会被先显示到界面上,反之,后下载的图片就后显示。


Java的并发库的CompletionService可以满足这种场景要求。该接口有两个重要方法:submit()和take()。submit用于提交一个runnable或者callable,一般会提交给一个线程池处理;而take就是取出已经执行完毕runnable或者callable实例的Future对象,如果没有满足要求的,就等待了。 CompletionService还有一个对应的方法poll,该方法与take类似,只是不会等待,如果没有满足要求,就返回null对象。


Java代码


[*]package concurrent;

[*]

[*]import java.util.concurrent.Callable;

[*]import java.util.concurrent.CompletionService;

[*]import java.util.concurrent.ExecutionException;

[*]import java.util.concurrent.ExecutorCompletionService;

[*]import java.util.concurrent.ExecutorService;

[*]import java.util.concurrent.Executors;

[*]import java.util.concurrent.Future;

[*]

[*]public class TestCompletionService {

[*]public static void main(String[] args) throws InterruptedException,

[*]ExecutionException {

[*]ExecutorService exec = Executors.newFixedThreadPool(10);

[*]CompletionService serv =

[*]new ExecutorCompletionService(exec);

[*]

[*]for (int index = 0; index 5; index++) {

[*]final int NO = index;

[*]Callable downImg = new Callable() {

[*]public String call() throws Exception {

[*]Thread.sleep((long) (Math.random() * 10000));

[*]return “Downloaded Image ” + NO;

[*]}

[*]};

[*]serv.submit(downImg);

[*]}

[*]

[*]Thread.sleep(1000 * 2);

[*]System.out.println(“Show web content”);

[*]for (int index = 0; index 5; index++) {

[*]Future task = serv.take();

[*]String img = task.get();

[*]System.out.println(img);

[*]}

[*]System.out.println(“End”);

[*]// 关闭线程池

[*]exec.shutdown();

[*]}

[*]}


运行结果:
Show web content
Downloaded Image 1
Downloaded Image 2
Downloaded Image 4
Downloaded Image 0
Downloaded Image 3
End


操作系统的信号量是个很重要的概念,在进程控制方面都有应用。Java并发库的Semaphore可以很轻松完成信号量控制,Semaphore可以控制某个资源可被同时访问的个数,acquire()获取一个许可,如果没有就等待,而release()释放一个许可。比如在Windows下可以设置共享文件的最大客户端访问个数。

Semaphore维护了当前访问的个数,提供同步机制,控制同时访问的个数。在数据结构中链表可以保存“无限”的节点,用Semaphore可以实现有限大小的链表。另外重入锁ReentrantLock也可以实现该功能,但实现上要负责些,代码也要复杂些。

下面的Demo中申明了一个只有5个许可的Semaphore,而有20个线程要访问这个资源,通过acquire()和release()获取和释放访问许可。


Java代码


[*]package concurrent;

[*]

[*]import java.util.concurrent.ExecutorService;

[*]import java.util.concurrent.Executors;

[*]import java.util.concurrent.Semaphore;

[*]

[*]public class TestSemaphore {

[*]public static void main(String[] args) {

[*]// 线程池

[*]ExecutorService exec = Executors.newCachedThreadPool();

[*]// 只能5个线程同时访问

[*]final Semaphore semp = new Semaphore(5);

[*]// 模拟20个客户端访问

[*]for (int index = 0; index 20; index++) {

[*]final int NO = index;

[*]Runnable run = new Runnable() {

[*]public void run() {

[*]try {

[*]// 获取许可

[*]semp.acquire();

[*]System.out.println(“Accessing: ” + NO);

[*]Thread.sleep((long) (Math.random() * 10000));

[*]// 访问完后,释放

[*]semp.release();

[*]} catch (InterruptedException e) {

[*]}

[*]}

[*]};

[*]exec.execute(run);

[*]}

[*]// 退出线程池

[*]exec.shutdown();

[*]}

[*]}


运行结果:
Accessing: 0
Accessing: 1
Accessing: 2
Accessing: 3
Accessing: 4
Accessing: 5
Accessing: 6
Accessing: 7
Accessing: 8
Accessing: 9
Accessing: 10
Accessing: 11
Accessing: 12
Accessing: 13
Accessing: 14
Accessing: 15
Accessing: 16
Accessing: 17
Accessing: 18
Accessing: 19
  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值