Linux下安装SVN服务端

[color=green][b]1、登录官网现在介质[/b][/color]
http://subversion.tigris.org/servlets/ProjectDocumentList?folderID=260&expandFolder=74
下载下面两个安装介质
subversion-[color=green]${version}[/color].tar.gz
subversion-deps-[color=green]${version}[/color].tar.gz
注：绿色部分为版本号，需要两个一致

[color=green][b]2、下载、安装依赖[/b][/color]
openssl

wget http://www.openssl.org/source/openssl-1.0.0a.tar.gz
cp openssl-1.0.0a.tar.gz /usr/local
cd openssl-1.0.0a
./config
./config -t
make depend
make
make test
make install

vi /etc/profile
PATH=/usr/local/ssl/bin:$PATH
export PATH
source /etc/profile

zlib

wget http://zlib.net/zlib-1.2.5.tar.gz
cp zlib-1.2.5.tar.gz /usr/local
cd zlib-1.2.5
./configure
make
make install
ln -s zlib-1.2.5 zlib

[color=green][b]3、安装subversion[/b][/color]

cp subversion-${version}.tar.gz /usr/local
cp subversion-deps-${version}.tar.gz /usr/local
cd /usr/local
tar -xvf subversion-${version}.tar.gz
tar -xvf subversion-deps-${version}.tar.gz
cd subversion-${version}
./configure --with-openssl=/usr/local/ssl --with-zlib=/usr/local/zlib --with-ssl --with-libs=/usr/local/ssl
make && make install

#检查安装是否成功

svn --version

[color=green][b]4、配置SVN[/b][/color]
#创建版本库

svnadmin create /usr/svn/repos
cd /usr/svn/repos/conf

[color=red]cat svnserve.conf[/color]
[code="python"]# cat svnserve.conf
### This file controls the configuration of the svnserve daemon, if you
### use it to allow access to this repository. (If you only allow
### access through http: and/or file: URLs, then this file is
### irrelevant.)

### Visit http://subversion.tigris.org/ for more information.

[general]
### These options control access to the repository for unauthenticated
### and authenticated users. Valid values are "write", "read",
### and "none". The sample settings below are the defaults.
anon-access = none
auth-access = write
### The password-db option controls the location of the password
### database file. Unless you specify a path starting with a /,
### the file's location is relative to the directory containing
### this configuration file.
### If SASL is enabled (see below), this file will NOT be used.
### Uncomment the line below to use the default password file.
password-db = passwd
### The authz-db option controls the location of the authorization
### rules for path-based access control. Unless you specify a path
### starting with a /, the file's location is relative to the the
### directory containing this file. If you don't specify an
### authz-db, no path-based access control is done.
### Uncomment the line below to use the default authorization file.
authz-db = authz
### This option specifies the authentication realm of the repository.
### If two repositories have the same authentication realm, they should
### have the same password database, and vice versa. The default realm
### is repository's uuid.
# realm = My First Repository
# realm = test

[sasl]
### This option specifies whether you want to use the Cyrus SASL
### library for authentication. Default is false.
### This section will be ignored if svnserve is not built with Cyrus
### SASL support; to check, run 'svnserve --version' and look for a line
### reading 'Cyrus SASL authentication is available.'
# use-sasl = true
### These options specify the desired strength of the security layer
### that you want SASL to provide. 0 means no encryption, 1 means
### integrity-checking only, values larger than 1 are correlated
### to the effective key length for encryption (e.g. 128 means 128-bit
### encryption). The values below are the defaults.
# min-encryption = 0
# max-encryption = 256
# [/code]


[color=red]cat passwd[/color]

### This file is an example password file for svnserve.
### Its format is similar to that of svnserve.conf. As shown in the
### example below it contains one section labelled [users].
### The name and password for each user follow, one account per line.

[users]
yuanjun = yuanjun
# harry = harryssecret
# sally = sallyssecret

[color=red]cat authz[/color]

### This file is an example authorization file for svnserve.
### Its format is identical to that of mod_authz_svn authorization
### files.
### As shown below each section defines authorizations for the path and
### (optional) repository specified by the section name.
### The authorizations follow. An authorization line can refer to:
###  - a single user,
###  - a group of users defined in a special [groups] section,
###  - an alias defined in a special [aliases] section,
###  - all authenticated users, using the '$authenticated' token,
###  - only anonymous users, using the '$anonymous' token,
###  - anyone, using the '*' wildcard.
###
### A match can be inverted by prefixing the rule with '~'. Rules can
### grant read ('r') access, read-write ('rw') access, or no access
### ('').

[aliases]
# joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average

[groups]
g1 = yuanjun
# harry_and_sally = harry,sally
# harry_sally_and_joe = harry,sally,&joe

# [/foo/bar]
# harry = rw
# &joe = r
# * =

# [repository:/baz/fuz]
# @harry_and_sally = rw
# * = r

[/]
@g1 = rw

[color=green][b]5、启动SVN服务端[/b][/color]

svnserve -d -r /usr/svn/ --config-file=/usr/svn/repos/conf/svnserve.conf

[color=green][b]6、测试下[/b][/color]

svn list svn://192.168.56.4/repos

[color=green][b]7、启停服务脚本[/b][/color]

vi run.sh
#!/bin/bash

if [ ! $# -eq 1 ];then
echo "Using run.sh start[stop|restart]"
exit 0
fi

start(){
svnserve -d -r /usr/svn/ --config-file=/usr/svn/repos/conf/svnserve.conf
}

stop(){
sn=`ps -ef|grep svn|grep -v grep|awk '{print $2}'`
if [ -n "$sn" ];then
kill -9 $sn
fi
}

case $1 in
start)
start
;;
stop)
stop
;;
restart)
stop
start
;;
*)
echo "$1 is unsupport param!"
exit 0
;;
esac

[color=green][b]参考[/b][/color]
[url]http://subversion.tigris.org/servlets/ProjectDocumentList?folderID=260&expandFolder=74[/url]
[url]http://blog.sina.com.cn/s/blog_70291fc101012guq.html[/url]
[url]http://liulijun-cn-2011.iteye.com/blog/2031654[/url]
[url]http://blog.csdn.net/cdl2008sky/article/details/6431529[/url]
[url]http://blog.sina.com.cn/s/blog_5542414f0100vw1l.html[/url]
[url]http://92xzz.diandian.com/post/2012-08-03/40037388390[/url]