hpux11.31 磁带备份报错-no space on the LIF volume

硬件环境：hp superdome 9000 PA

系统环境：hpux 11.31

在此环境下，安装完成 oracle11.2.0.3后， 系统根盘做mirror，完成后，进行磁带备份。

备份过程中报错如下：

cqlsdb#[/tmp]make_tape_recovery -Av -a /dev/rmt/2mn
* Creating local directories for configuration files and archive.

======= 12/21/12 18:07:42 EAT Started make_tape_recovery. (Fri Dec 21 18:07:42 EAT 2012)
@(#)Ignite-UX Revision C.7.13.240
@(#)ignite/net_recovery (opt) Revision: /branches/IUX_RA1109/ignite/src@83765 Last Modified: 2011-06-14 10:28:20 +0530 (Tue, 14 Jun 2011)

* Recovery Archive Description = Recovery Archive

* Recovery Archive Location = /dev/rmt/2mn

* Number of Archives to Save = 2

* Pax type = tar


In? dsk/vg name minor# Associated disks/mountpoints
2 v /dev/vg00 0x00 /dev/disk/disk84
/dev/vg00/lvol1 /stand 2
/dev/vg00/lvol2
/dev/vg00/lvol3 / 2
/dev/vg00/lvol4 /tmp 2
/dev/vg00/lvol5 /home 2
/dev/vg00/lvol6 /opt 2
/dev/vg00/lvol7 /usr 2
/dev/vg00/lvol8 /var 2
/dev/vg00/oracle /oracle 2

** 0 - The Volume Group or Filesystem is Not included in the
System Recovery Archive
** 1 - The Volume Group or Filesystem is Partially included in the
System Recovery Archive
** 2 - The Volume Group or Filesystem is Fully included in the
System Recovery Archive

* Checking Versions of Ignite-UX filesets
* Scanning system for IO devices...
* Boot device is: 0/0/9/0/1.0x9.0x0
* Creating System Configuration.
* /opt/ignite/bin/save_config -f /var/opt/ignite/recovery/2012-12-21,18:07/system_cfg vg00
* Backing Up Volume Group /dev/vg00
* /usr/sbin/vgcfgbackup /dev/vg00
* Creating Map Files for Volume Group /dev/vg00
* /usr/sbin/vgexport -s -p -m /etc/lvmconf/vg00.mapfile /dev/vg00

* Creating Control Configuration.
* Creating Archive File List
* Creating Archive Configuration

* /opt/ignite/lbin/make_arch_config -c /var/opt/ignite/recovery/2012-12-21,18:07/archive_cfg -g /var/opt/ignite/recovery/2012-12-21,18:07/flist -n 2012-12-21,18:07 -r pa -b 64 -d
Recovery\ Archive -t 1 -i 1 -m t
* Saving the information about archive to /var/opt/ignite/recovery/previews
* Creating The Tape Archive
* Checking configuration file for Syntax
make_medialif: ERROR: Cannot lifcp -r -K2 file "/opt/ignite/data/Rel_B.11.31/SYSCMDSIA" to "/var/tmp/uxinstlf.recovery:SYSCMDSIA":
lifcp: Cannot create SYSCMDSIA ; no space on the LIF volume
ERROR: System Error, /opt/ignite/bin/make_medialif failed creating boot LIF file.
ERROR: Failed to generate LIF on tape.

解决办法：

In /opt/ignite/bin/make_medialif

change LIFVolSize='500000000' to LIFVolSize='750000000'.

there is obviously not enough space in the defined LIF area to hold all the files.

注：hp superdome 9000 IA + hpux 11.31 备份不会出现上述问题， 不需要更改。