SGM2593DXTDI6G/TR 模拟和混合信号单通道配电EN脚控制2.5-6v

最新推荐文章于 2024-06-12 15:06:04 发布

ivy15986837715

最新推荐文章于 2024-06-12 15:06:04 发布

阅读量394

点赞数 3

文章标签： c语言开发语言单片机 A/D 转换器视频编解码

本文链接：https://blog.csdn.net/ivy15986837715/article/details/137018898

版权

SGM2593DXTDI6G/TR 模拟和混合信号单通道配电EN脚控制2.5-6v

The SGM2593 and SGM2593D are single channel power distribution switches. The switch is controlled by the EN pin and operates from 2.5V to 6V supply voltage. It can be used in USB power distribution applications.
The device integrates programmable current limit to protect the upstream power supply from damage during over-current or short-circuit condition. It also has the function of over-temperature protection.
The device is designed with soft-start circuit to cope with inrush currents when large capacitive loads are connected. The nFAULT output will be asserted to low level during over-current, over-temperature or reverse voltage condition.
The SGM2593D further reduces the total solution size by integrating a 47Ω pull-down resistor for output discharge when the switch is shut down by EN.
The SGM2593 and SGM2593D are available in Green TDFN-2×2-6AL and SOT-23-6 packages

特点：
High-side N-MOSFET
On-Resistance:
TDFN-2×2-6AL: 60mΩ (TYP)
SOT-23-6: 65mΩ (TYP)
Programmable Current Limit Range: 0.1A to 3A
1.5A at RILIM = 4.53kΩ
Input Voltage Range: 2.5V to 6V
Quiescent Current: 27μA (TYP)
Shutdown Current: 0.28μA (TYP)
Soft-Start Function
Over-Temperature Protection
Under-Voltage Lockout Protection for VIN
No Reversed Leakage Current (Reverse Blocking)
Fault Flag (nFAULT Pin)
Quick Output Discharge (SGM2593D Only)
1.2MΩ Pull-Down Resistor at EN Pin
Available in Green TDFN-2×2-6AL and SOT-23-6 Packages