phpStorm 安装 Xdebug

我是在网上下载了最新的XAMPP，结果发现里面没有Xdebug（或者说是我没有找到）。所以在网上搜索了一番终于把 phpStorm 里的 Xdebug 配置好了。写下这篇文章以来给以后的自己一个存档，也跟大家分享一下。

首先确认你的 Mac 安装了 Homebrew，然后在终端里面输入如下代码安装 php5.6：

brew install homebrew/php/php56

安装成功：

To enable PHP in Apache add the following to httpd.conf and restart Apache:
    LoadModule php5_module    /usr/local/opt/php56/libexec/apache2/libphp5.so

The php.ini file can be found in:
    /usr/local/etc/php/5.6/php.ini

✩✩✩✩ Extensions ✩✩✩✩

If you are having issues with custom extension compiling, ensure that
you are using the brew version, by placing /usr/local/bin before /usr/sbin in your PATH:

      PATH="/usr/local/bin:$PATH"

PHP56 Extensions will always be compiled against this PHP. Please install them
using --without-homebrew-php to enable compiling against system PHP.

✩✩✩✩ PHP CLI ✩✩✩✩

If you wish to swap the PHP you use on the command line, you should add the following to ~/.bashrc,
~/.zshrc, ~/.profile or your shell's equivalent configuration file:

      export PATH="$(brew --prefix homebrew/php/php56)/bin:$PATH"

✩✩✩✩ FPM ✩✩✩✩

To launch php-fpm on startup:
    mkdir -p ~/Library/LaunchAgents
    cp /usr/local/opt/php56/homebrew.mxcl.php56.plist ~/Library/LaunchAgents/
    launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.php56.plist

The control script is located at /usr/local/opt/php56/sbin/php56-fpm

OS X 10.8 and newer come with php-fpm pre-installed, to ensure you are using the brew version you need to make sure /usr/local/sbin is before /usr/sbin in your PATH:

  PATH="/usr/local/sbin:$PATH"

You may also need to edit the plist to use the correct "UserName".

Please note that the plist was called 'homebrew-php.josegonzalez.php56.plist' in old versions
of this formula.

To have launchd start homebrew/php/php56 now and restart at login:
  brew services start homebrew/php/php56
==> Summary
  /usr/local/Cellar/php56/5.6.23: 331 files, 48.9M

然后再输入如下代码安装对应的 Xdebug：

brew install php56-xdebug

Xdebug 安装好后，它会告诉你已经把之前安装的 php5.6 和 Xdebug 『绑在一起了』：

/usr/local/etc/php/5.6/conf.d/ext-xdebug.ini was created

现在再到 phpStorm 里面找到这个界面：

按照我标出来的顺序操作，新建一个 php 的编译器配置，在进行完第4步后会显示 php 和 Xdebug 的版本，这样就算是成功了。

参考网站：
1. https://xdebug.org/docs/install
2. https://github.com/Homebrew/homebrew-php#installation