LVS+keepalived配置备忘

LVS + keepalived实现负载均衡的文档很多，这里不再重复说明，只记录在配置过程中容易忘记的地方。
1. 确保IP转发功能开启

# sysctl -a | grep ip_forward
net.ipv4.ip_forward = 1

方法有三种
1）sysctl net.ipv4.ip_forward=1
2) echo "1" > /proc/sys/net/ipv4/ip_forward
3) 修改sysctl.conf, net.ipv4.ip_forward = 1, 执行sysctl -p命令

2. virtual ip的配置
keepalived 采用RD转发模式
测试拓扑结构
linux director
ip：192.168.1.199
vip：192.168.1.210
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
| |
real server real server
ip: 192.168.1.13 ip: 192.168.1.14
vip: 192.168.1.210 vip: 192.168.1.210

lvs客户端也就是real server的vip，要和linux director的vip保持一致
lvs-real.sh

#!/bin/bash
VIP=192.168.1.210
/etc/rc.d/init.d/functions
case "$1" in
start)
       ifconfig lo:0 $VIP netmask 255.255.255.255 broadcast $VIP
       /sbin/route add -host $VIP dev lo:0
       echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore
       echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce
       echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore
       echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce
       sysctl -p >/dev/null 2>&1
       echo "RealServer Start OK"
       ;;
stop)
       ifconfig lo:0 down
       route del $VIP >/dev/null 2>&1
       echo "0" >/proc/sys/net/ipv4/conf/lo/arp_ignore
       echo "0" >/proc/sys/net/ipv4/conf/lo/arp_announce
       echo "0" >/proc/sys/net/ipv4/conf/all/arp_ignore
       echo "0" >/proc/sys/net/ipv4/conf/all/arp_announce
       echo "RealServer Stoped"
       ;;
*)
       echo "Usage: $0 {start|stop}"
       exit 1
esac
exit 0

linux director上keepalived.conf

! Configuration File for keepalived

global_defs {
   notification_email {
        #huaying@staff.sina.com.cn
   }
   #notification_email_from Alexandre.Cassen@firewall.loc
   #smtp_server 127.0.0.1
   #smtp_connect_timeout 30
   router_id LVS_DEVEL
}

virtual_server 192.168.1.210 80 {
   delay_loop 3
   lb_algo rr
   lb_kind DR
   persistence_timeout 120
   protocol TCP

   real_server 192.168.1.13 80 {
     weight 100
     TCP_CHECK {
        connect_timeout 3
        nb_get_retry 3
        delay_before_retry 3
        connect_port 80
     }
   }

   real_server 192.168.1.14 80 {
     weight 100
     TCP_CHECK {
        connect_timeout 3
        nb_get_retry 3
        delay_before_retry 3
        connect_port 80
     }
   }
}

说明：由于是测试lvs负责均衡功能，没有配置vrrp_instance，在实际应用中，可以配置双linux director。所以在linux director上手工添加vip：192.168.1.210，可以使用如下方法

# ip addr add 192.168.1.210 dev eth0

3. keepalived DR转发模式，需要将real server的ip与virtual ip设定在同一个网段

4. linux director 需要安装ipvsadm，当ipvsadm启动后可以查看它是否被加载

# lsmod | grep ip_vs
ip_vs                  94742  5 

#lpvsadm -ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  192.168.1.210:80 rr persistent 120
  -> 192.168.1.13:80              Route   100    0          0         
  -> 192.168.1.14:80              Route   100    0          0   

5. 如果配置都正确，需要考虑是否将ipvs框架编译进keepalived
6. 如还不行，考虑其它原因


二. NAT转发模式的配置
1. linux director需要两块网卡，一块对外提供服务，一块对内作为转发用，对内ip作为real server的网关
2. real server 不需要配置成lvs客户端，只要将网关配置为linux director的对内ip即可
3. 如果开启了iptables，请注意调整iptables FORWARD链的规则


参考：
1. [url="http://hi.baidu.com/leolance/item/d2c6c9337b206281c2cf2944"]lvs + keepalived 系统架构测试[/url]
2. [url="http://blog.csdn.net/m582445672/article/details/7670015"]Keepalived+LVS-DR模式配置高可用负载均衡集群[/url]
3.[url="http://www.ultramonkey.org/papers/lvs_tutorial/html/"]Linux Virtual Server Tutorial[/url]
4. [url="http://www.linuxvirtualserver.org/docs/ha/keepalived.html"]The Keepalived Solution[/url]