一般的apache配置

 

#

# This is the main Apache server configuration file.  It contains the

# configuration directives that give the server its instructions.

# See <URL:http://httpd.apache.org/docs/2.2/> for detailed information.

# In particular, see

# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>

# for a discussion of each configuration directive.

#

#

# Do NOT simply read the instructions in here without understanding

# what they do.  They're here only as hints or reminders.  If you are unsure

# consult the online docs. You have been warned.  

#

# The configuration directives are grouped into three basic sections:

#  1. Directives that control the operation of the Apache server process as a

#     whole (the 'global environment').

#  2. Directives that define the parameters of the 'main' or 'default' server,

#     which responds to requests that aren't handled by a virtual host.

#     These directives also provide default values for the settings

#     of all virtual hosts.

#  3. Settings for virtual hosts, which allow Web requests to be sent to

#     different IP addresses or hostnames and have them handled by the

#     same Apache server process.

#

# Configuration and logfile names: If the filenames you specify for many

# of the server's control files begin with "/" (or "drive:/" for Win32), the

# server will use that explicit path.  If the filenames do *not* begin

# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"

# with ServerRoot set to "/etc/httpd" will be interpreted by the

# server as "/etc/httpd/logs/foo.log".

#

 

### Section 1: Global Environment

#

# The directives in this section affect the overall operation of Apache,

# such as the number of concurrent requests it can handle or where it

# can find its configuration files.

#

 

#

# Don't give away too much information about all the subcomponents

# we are running.  Comment out this line if you don't mind remote sites

# finding out what major optional modules you are running

ServerTokens Prod

 

#

# ServerRoot: The top of the directory tree under which the server's

# configuration, error, and log files are kept.

#

# NOTE!  If you intend to place this on an NFS (or otherwise network)

# mounted filesystem then please read the LockFile documentation

# (available at <URL:http://httpd.apache.org/docs/2.2/mod/mpm_common.html#lockfile>);

# you will save yourself a lot of trouble.

#

# Do NOT add a slash at the end of the directory path.

#

ServerRoot "/etc/httpd"

 

#

# PidFile: The file in which the server should record its process

# identification number when it starts.

#

PidFile run/httpd.pid

 

#

# Timeout: The number of seconds before receives and sends time out.

#

Timeout 120

 

#

# KeepAlive: Whether or not to allow persistent connections (more than

# one request per connection). Set to "Off" to deactivate.

#

KeepAlive Off

 

#

# MaxKeepAliveRequests: The maximum number of requests to allow

# during a persistent connection. Set to 0 to allow an unlimited amount.

# We recommend you leave this number high, for maximum performance.

#

MaxKeepAliveRequests 100

 

#

# KeepAliveTimeout: Number of seconds to wait for the next request from the

# same client on the same connection.

#

KeepAliveTimeout 15

 

##

## Server-Pool Size Regulation (MPM specific)

## 

 

# prefork MPM

# StartServers: number of server processes to start

# MinSpareServers: minimum number of server processes which are kept spare

# MaxSpareServers: maximum number of server processes which are kept spare

# ServerLimit: maximum value for MaxClients for the lifetime of the server

# MaxClients: maximum number of server processes allowed to start

# MaxRequestsPerChild: maximum number of requests a server process serves

<IfModule prefork.c>

StartServers       8

MinSpareServers    5

MaxSpareServers   20

ServerLimit      256

MaxClients       256

MaxRequestsPerChild  4000

</IfModule>

 

# worker MPM

# StartServers: initial number of server processes to start

# MaxClients: maximum number of simultaneous client connections

# MinSpareThreads: minimum number of worker threads which are kept spare

# MaxSpareThreads: maximum number of worker threads which are kept spare

# ThreadsPerChild: constant number of worker threads in each server process

# MaxRequestsPerChild: maximum number of requests a server process serves

<IfModule worker.c>

StartServers         2

MaxClients         150

MinSpareThreads     25

MaxSpareThreads     75 

ThreadsPerChild     25

MaxRequestsPerChild  0

</IfModule>

 

#

# Listen: Allows you to bind Apache to specific IP addresses and/or

# ports, in addition to the default. See also the <VirtualHost>

# directive.

#

# Change this to Listen on specific IP addresses as shown below to 

# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)

#

#Listen 12.34.56.78:80

Listen 8080

 

#

# Dynamic Shared Object (DSO) Support

#

# To be able to use the functionality of a module which was built as a DSO you

# have to place corresponding `LoadModule' lines at this location so the

# directives contained in it are actually available _before_ they are used.

# Statically compiled modules (those listed by `httpd -l') do not need

# to be loaded here.

#

# Example:

# LoadModule foo_module modules/mod_foo.so

#

LoadModule auth_basic_module modules/mod_auth_basic.so

LoadModule auth_digest_module modules/mod_auth_digest.so

LoadModule authn_file_module modules/mod_authn_file.so

LoadModule authn_alias_module modules/mod_authn_alias.so

LoadModule authn_anon_module modules/mod_authn_anon.so

LoadModule authn_dbm_module modules/mod_authn_dbm.so

LoadModule authn_default_module modules/mod_authn_default.so

LoadModule authz_host_module modules/mod_authz_host.so

LoadModule authz_user_module modules/mod_authz_user.so

LoadModule authz_owner_module modules/mod_authz_owner.so

LoadModule authz_groupfile_module modules/mod_authz_groupfile.so

LoadModule authz_dbm_module modules/mod_authz_dbm.so

LoadModule authz_default_module modules/mod_authz_default.so

LoadModule ldap_module modules/mod_ldap.so

LoadModule authnz_ldap_module modules/mod_authnz_ldap.so

LoadModule include_module modules/mod_include.so

LoadModule log_config_module modules/mod_log_config.so

LoadModule logio_module modules/mod_logio.so

LoadModule env_module modules/mod_env.so

LoadModule ext_filter_module modules/mod_ext_filter.so

LoadModule mime_magic_module modules/mod_mime_magic.so

LoadModule expires_module modules/mod_expires.so

LoadModule deflate_module modules/mod_deflate.so

LoadModule headers_module modules/mod_headers.so

LoadModule usertrack_module modules/mod_usertrack.so

LoadModule setenvif_module modules/mod_setenvif.so

LoadModule mime_module modules/mod_mime.so

LoadModule dav_module modules/mod_dav.so

LoadModule status_module modules/mod_status.so

LoadModule autoindex_module modules/mod_autoindex.so

LoadModule info_module modules/mod_info.so

LoadModule dav_fs_module modules/mod_dav_fs.so

LoadModule vhost_alias_module modules/mod_vhost_alias.so

LoadModule negotiation_module modules/mod_negotiation.so

LoadModule dir_module modules/mod_dir.so

LoadModule actions_module modules/mod_actions.so

LoadModule speling_module modules/mod_speling.so

LoadModule userdir_module modules/mod_userdir.so

LoadModule alias_module modules/mod_alias.so

LoadModule rewrite_module modules/mod_rewrite.so

LoadModule proxy_module modules/mod_proxy.so

LoadModule proxy_balancer_module modules/mod_proxy_balancer.so

LoadModule proxy_ftp_module modules/mod_proxy_ftp.so

LoadModule proxy_http_module modules/mod_proxy_http.so

LoadModule proxy_connect_module modules/mod_proxy_connect.so

LoadModule cache_module modules/mod_cache.so

LoadModule suexec_module modules/mod_suexec.so

LoadModule disk_cache_module modules/mod_disk_cache.so

LoadModule file_cache_module modules/mod_file_cache.so

LoadModule mem_cache_module modules/mod_mem_cache.so

LoadModule cgi_module modules/mod_cgi.so

LoadModule version_module modules/mod_version.so

LoadModule php5_module        /usr/lib/httpd/modules/libphp5.so

 

#

# The following modules are not loaded by default:

#

#LoadModule cern_meta_module modules/mod_cern_meta.so

#LoadModule asis_module modules/mod_asis.so

 

#

# Load config files from the config directory "/etc/httpd/conf.d".

#

Include conf.d/*.conf

 

#

# ExtendedStatus controls whether Apache will generate "full" status

# information (ExtendedStatus On) or just basic information (ExtendedStatus

# Off) when the "server-status" handler is called. The default is Off.

#

#ExtendedStatus On

 

#

# If you wish httpd to run as a different user or group, you must run

# httpd as root initially and it will switch.  

#

# User/Group: The name (or #number) of the user/group to run httpd as.

#  . On SCO (ODT 3) use "User nouser" and "Group nogroup".

#  . On HPUX you may not be able to use shared memory as nobody, and the

#    suggested workaround is to create a user www and use that user.

#  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)

#  when the value of (unsigned)Group is above 60000; 

#  don't use Group #-1 on these systems!

#

User apache

Group apache

 

### Section 2: 'Main' server configuration

#

# The directives in this section set up the values used by the 'main'

# server, which responds to any requests that aren't handled by a

# <VirtualHost> definition.  These values also provide defaults for

# any <VirtualHost> containers you may define later in the file.

#

# All of these directives may appear inside <VirtualHost> containers,

# in which case these default settings will be overridden for the

# virtual host being defined.

#

 

#

# ServerAdmin: Your address, where problems with the server should be

# e-mailed.  This address appears on some server-generated pages, such

# as error documents.  e.g. admin@your-domain.com

#

ServerAdmin root@localhost

 

#

# ServerName gives the name and port that the server uses to identify itself.

# This can often be determined automatically, but we recommend you specify

# it explicitly to prevent problems during startup.

#

# If this is not set to valid DNS name for your host, server-generated

# redirections will not work.  See also the UseCanonicalName directive.

#

# If your host doesn't have a registered DNS name, enter its IP address here.

# You will have to access it by its address anyway, and this will make 

# redirections work in a sensible way.

#

ServerName basic.10.com.cn:8080

 

#

# UseCanonicalName: Determines how Apache constructs self-referencing 

# URLs and the SERVER_NAME and SERVER_PORT variables.

# When set "Off", Apache will use the Hostname and Port supplied

# by the client.  When set "On", Apache will use the value of the

# ServerName directive.

#

UseCanonicalName Off

 

#

# DocumentRoot: The directory out of which you will serve your

# documents. By default, all requests are taken from this directory, but

# symbolic links and aliases may be used to point to other locations.

#

DocumentRoot "/var/www/html"

 

#

# Each directory to which Apache has access can be configured with respect

# to which services and features are allowed and/or disabled in that

# directory (and its subdirectories). 

#

# First, we configure the "default" to be a very restrictive set of 

# features.  

#

<Directory />

    Options FollowSymLinks

    AllowOverride None

</Directory>

 

#

# Note that from this point forward you must specifically allow

# particular features to be enabled - so if something's not working as

# you might expect, make sure that you have specifically enabled it

# below.

#

 

#

# This should be changed to whatever you set DocumentRoot to.

#

<Directory "/var/www/html">

 

#

# Possible values for the Options directive are "None", "All",

# or any combination of:

#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

#

# Note that "MultiViews" must be named *explicitly* --- "Options All"

# doesn't give it to you.

#

# The Options directive is both complicated and important.  Please see

# http://httpd.apache.org/docs/2.2/mod/core.html#options

# for more information.

#

    Options Indexes FollowSymLinks

 

#

# AllowOverride controls what directives may be placed in .htaccess files.

# It can be "All", "None", or any combination of the keywords:

#   Options FileInfo AuthConfig Limit

#

    AllowOverride None

 

#

# Controls who can get stuff from this server.

#

    Order allow,deny

    Allow from all

 

</Directory>

 

#

# UserDir: The name of the directory that is appended onto a user's home

# directory if a ~user request is received.

#

# The path to the end user account 'public_html' directory must be

# accessible to the webserver userid.  This usually means that ~userid

# must have permissions of 711, ~userid/public_html must have permissions

# of 755, and documents contained therein must be world-readable.

# Otherwise, the client will only receive a "403 Forbidden" message.

#

# See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden

#

<IfModule mod_userdir.c>

    #

    # UserDir is disabled by default since it can confirm the presence

    # of a username on the system (depending on home directory

    # permissions).

    #

    UserDir disable

 

    #

    # To enable requests to /~user/ to serve the user's public_html

    # directory, remove the "UserDir disable" line above, and uncomment

    # the following line instead:

    # 

    #UserDir public_html

 

</IfModule>