导读:
/*****************************************from luofuchong**********************************/
1、让内核支持热插拔
│ General setup --->
Configure standard kernel features (for small systems) --->
Support for hot-pluggable devices (NEW)
2.USB驱动设置
Device Drivers --->
Generic Driver Options --->
<*>Userspace firmware loading support
Block devices --->
<*>Low Performance USB Block driver
SCSI device support --->
<*>SCSI generic support
Probe all LUNs on each SCSI device
USB support --->
<*>Support for Host-side USB
USB device filesystem
<*>OHCI HCD support
<*>USB Mass Storage support
USB Monitor
3、加入了MSDOS fs和VFAT fs的支持。
File systems --->
DOS/FAT/NT Filesystems --->
<*>MSDOS fs support
<*>VFAT (Windows-95) fs support
(936) Default codepage for FAT
(cp936) Default iocharset for FAT
File systems --->
Partition Types --->
PC BIOS (MSDOS partition tables) support
4. 加入中文字体库(可惜在我的板上还是没能正常显示中文~_~,知道的朋友麻烦告诉我一声,大家一起探讨)
Native Language Support --->
<*>Simplified Chinese charset (CP936, GB2312)
<*>NLS UTF8
5、另外,如果想让内核把它当成SCSI设备来处理的话,只要把上面:
Device Drivers --->
Block devices --->
<*>Low Performance USB Block driver
的 Low Performance USB Block driver这个选项去掉,然后把:
Device Drivers --->
SCSI device support --->
<*>SCSI disk support
的SCSI disk support这个选项选上,重新编译内核就行。
/***************************************end from*********************************************/
本文转自
http://www.lpi-china.org/bbs/viewthread.php?tid=4146&extra=page%3D1
/*****************************************from luofuchong**********************************/
1、让内核支持热插拔
│ General setup --->
Configure standard kernel features (for small systems) --->
Support for hot-pluggable devices (NEW)
2.USB驱动设置
Device Drivers --->
Generic Driver Options --->
<*>Userspace firmware loading support
Block devices --->
<*>Low Performance USB Block driver
SCSI device support --->
<*>SCSI generic support
Probe all LUNs on each SCSI device
USB support --->
<*>Support for Host-side USB
USB device filesystem
<*>OHCI HCD support
<*>USB Mass Storage support
USB Monitor
3、加入了MSDOS fs和VFAT fs的支持。
File systems --->
DOS/FAT/NT Filesystems --->
<*>MSDOS fs support
<*>VFAT (Windows-95) fs support
(936) Default codepage for FAT
(cp936) Default iocharset for FAT
File systems --->
Partition Types --->
PC BIOS (MSDOS partition tables) support
4. 加入中文字体库(可惜在我的板上还是没能正常显示中文~_~,知道的朋友麻烦告诉我一声,大家一起探讨)
Native Language Support --->
<*>Simplified Chinese charset (CP936, GB2312)
<*>NLS UTF8
5、另外,如果想让内核把它当成SCSI设备来处理的话,只要把上面:
Device Drivers --->
Block devices --->
<*>Low Performance USB Block driver
的 Low Performance USB Block driver这个选项去掉,然后把:
Device Drivers --->
SCSI device support --->
<*>SCSI disk support
的SCSI disk support这个选项选上,重新编译内核就行。
/***************************************end from*********************************************/
本文转自
http://www.lpi-china.org/bbs/viewthread.php?tid=4146&extra=page%3D1