分类: LINUX
系统环境:
Vmware Workstation 11
CentOS 6.5 x64
网络环境:
192.168.234.133
软件环境
Opensips 2.1.2
http://opensips.org/pub/opensips/
安装mysql
# yum -y install mysql-server mysql mysql-devel
# /etc/init.d/mysqld start
# mysql_secure_installation
安装编译
# yum -y install gcc gcc-c++ glibc bison flex zlib-devel ncurses ncurses-devel
# tar xf opensips-2.1.2.tar.gz
# make menuconfig 执行此命令直接退出,会在源码根目录下生成Makefile.cfg文件或者直接复制Makefile.cfg.temple(使用左右键进入/返回菜单;opensis中默认是不支持mysql的,需要手动修改Makefile.cfg文件)
![](https://i-blog.csdnimg.cn/blog_migrate/0d1ecab3bf770849dffe04d03dd81ee9.png)
在exclude_modules中删掉db_mysql,在include_modules中添加db_mysql,修改安装目录为PREFIX=/usr/local/opensips/
![](https://i-blog.csdnimg.cn/blog_migrate/f863f805f42b5edf0e98676cb3a8783b.png)
# make all
# make install
# cd /usr/local/opensips/
目录结构如下![](https://i-blog.csdnimg.cn/blog_migrate/27ca83a197f5fe368a1f48d28226bf94.png)
# cd /usr/local/opensips/etc/opensips
修改opensipsctlrc文件![](https://i-blog.csdnimg.cn/blog_migrate/2ad8a2dfd1660744e19370bd09d782bc.png)
修改opensips.cfg文件(ps:此处有大坑,请注意;网上的教程千篇一律的说在此文件中打开mysql的注释项,然而此文件中并没有任何与mysql相关的配置项;虽然我们在开始编译安装的时候已经include了mysql模块,我们自己生成一个cfg文件吧!)
![](https://i-blog.csdnimg.cn/blog_migrate/6e1b7ee3c1725a4b1eb9fb86e90581da.png)
![](https://i-blog.csdnimg.cn/blog_migrate/6cd63ff158d7a6e8c469952011d8f912.png)
![](https://i-blog.csdnimg.cn/blog_migrate/aee71a2d1a7c69ffb0072aa0d3a760be.png)
![](https://i-blog.csdnimg.cn/blog_migrate/f6ad0c012cef31805726dbf524694aad.png)
![](https://i-blog.csdnimg.cn/blog_migrate/51985642d9dc1d83f89cfa20e466a36e.png)
# mv opensips_residential_2016-2-24_4\:57\:26.cfg opensips.cfg
现在开始真正的修改opensips.cfg
listen=udp:192.168.234.133:5060 # CUSTOMIZE ME
listen=tcp:192.168.234.133:5060 # CUSTOMIZE ME
loadmodule "db_mysql.so"
mysql://opensips:opensipsrw@localhost/opensips #这个应该有四处,注意mysql服务器的连接地址
以下是我的配置文件
点击(此处)折叠或打开
- #
- # $Id$
- #
- # OpenSIPS residential configuration script
- # by OpenSIPS Solutions
- #
- # This script was generated via "make menuconfig", from
- # the "Residential" scenario.
- # You can enable / disable more features / functionalities by
- # re-generating the scenario with different options.#
- #
- # Please refer to the Core CookBook at:
- # http://www.opensips.org/Resources/DocsCookbooks
- # for a explanation of possible statements, functions and parameters.
- #
- ####### Global Parameters #########
- debug=3
- log_stderror=no
- log_facility=LOG_LOCAL0
- fork=yes
- children=4
- /* uncomment the following lines to enable debugging */
- #debug=6
- #fork=no
- #log_stderror=yes
- /* uncomment the next line to enable the auto temporary blacklisting of
- not available destinations (default disabled) */
- #disable_dns_blacklist=no
- /* uncomment the next line to enable IPv6 lookup after IPv4 dns
- lookup failures (default disabled) */
- #dns_try_ipv6=yes
- /* comment the next line to enable the auto discovery of local aliases
- based on revers DNS on IPs */
- auto_aliases=no
- listen=udp:192.168.234.133:5060 # CUSTOMIZE ME
- listen=tcp:192.168.234.133:5060 # CUSTOMIZE ME
- ####### Modules Section ########
- #set module path
- mpath="/usr/local/opensips/lib64/opensips/modules/"
- #### SIGNALING module
- loadmodule "signaling.so"
- #### StateLess module
- loadmodule "sl.so"
- #### Transaction Module
- loadmodule "tm.so"
- modparam("tm", "fr_timeout", 5)
- modparam("tm", "fr_inv_timeout", 30)
- modparam("tm", "restart_fr_on_each_reply", 0)
- modparam("tm", "onreply_avp_mode", 1)
- #### Record Route Module
- loadmodule "rr.so"
- /* do not append from tag to the RR (no need for this script) */
- modparam("rr", "append_fromtag", 0)
- #### MAX ForWarD module
- loadmodule "maxfwd.so"
- #### SIP MSG OPerationS module
- loadmodule "sipmsgops.so"
- #### FIFO Management Interface
- loadmodule "mi_fifo.so"
- modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")
- modparam("mi_fifo", "fifo_mode", 0666)
- #### URI module
- loadmodule "uri.so"
- modparam("uri", "use_uri_table", 0)
- #### MYSQL module
- loadmodule "db_mysql.so"
- #### USeR LOCation module
- loadmodule "usrloc.so"
- modparam("usrloc", "nat_bflag", "NAT")
- modparam("usrloc", "db_mode", 2)
- modparam("usrloc", "db_url",
- "mysql://opensips:opensipsrw@localhost/opensips") # CUSTOMIZE ME
- #### REGISTRAR module
- loadmodule "registrar.so"
- modparam("registrar", "tcp_persistent_flag", "TCP_PERSISTENT")
- /* uncomment the next line not to allow more than 10 contacts per AOR */
- #modparam("registrar", "max_contacts", 10)
- #### ACCounting module
- loadmodule "acc.so"
- /* what special events should be accounted ? */
- modparam("acc", "early_media", 0)
- modparam("acc", "report_cancels", 0)
- /* by default we do not adjust the direct of the sequential requests.
- if you enable this parameter, be sure the enable "append_fromtag"
- in "rr" module */
- modparam("acc", "detect_direction", 0)
- modparam("acc", "failed_transaction_flag", "ACC_FAILED")
- /* account triggers (flags) */
- modparam("acc", "db_flag", "ACC_DO")
- modparam("acc", "db_missed_flag", "ACC_MISSED")
- modparam("acc", "db_url",
- "mysql://opensips:opensipsrw@localhost/opensips") # CUSTOMIZE ME
- #### AUTHentication modules
- loadmodule "auth.so"
- loadmodule "auth_db.so"
- modparam("auth_db", "calculate_ha1", yes)
- modparam("auth_db", "password_column", "password")
- modparam("auth_db|uri", "db_url",
- "mysql://opensips:opensipsrw@localhost/opensips") # CUSTOMIZE ME
- modparam("auth_db", "load_credentials", "")
- #### DIALOG module
- loadmodule "dialog.so"
- modparam("dialog", "dlg_match_mode", 1)
- modparam("dialog", "default_timeout", 21600) # 6 hours timeout
- modparam("dialog", "db_mode", 2)
- modparam("dialog", "db_url",
- "mysql://opensips:opensipsrw@localhost/opensips") # CUSTOMIZE ME
- loadmodule "proto_udp.so"
- loadmodule "proto_tcp.so"
- ####### Routing Logic ########
- # main request routing logic
- route{
- if (!mf_process_maxfwd_header("10")) {
- sl_send_reply("483","Too Many Hops");
- exit;
- }
- if (has_totag()) {
- # sequential request withing a dialog should
- # take the path determined by record-routing
- if (loose_route()) {
- # validate the sequential request against dialog
- if ( $DLG_status!=NULL && !validate_dialog() ) {
- xlog("In-Dialog $rm from $si (callid=$ci) is not valid according to dialog\n");
- ## exit;
- }
- if (is_method("BYE")) {
- setflag(ACC_DO); # do accounting ...
- setflag(ACC_FAILED); # ... even if the transaction fails
- } else if (is_method("INVITE")) {
- # even if in most of the cases is useless, do RR for
- # re-INVITEs alos, as some buggy clients do change route set
- # during the dialog.
- record_route();
- }
- # route it out to whatever destination was set by loose_route()
- # in $du (destination URI).
- route(relay);
- } else {
- if ( is_method("ACK") ) {
- if ( t_check_trans() ) {
- # non loose-route, but stateful ACK; must be an ACK after
- # a 487 or e.g. 404 from upstream server
- t_relay();
- exit;
- } else {
- # ACK without matching transaction ->
- # ignore and discard
- exit;
- }
- }
- sl_send_reply("404","Not here");
- }
- exit;
- }
- # CANCEL processing
- if (is_method("CANCEL"))
- {
- if (t_check_trans())
- t_relay();
- exit;
- }
- t_check_trans();
- if ( !(is_method("REGISTER") ) ) {
- if (from_uri==myself)
- {
- # authenticate if from local subscriber
- # authenticate all initial non-REGISTER request that pretend to be
- # generated by local subscriber (domain from FROM URI is local)
- if (!proxy_authorize("", "subscriber")) {
- proxy_challenge("", "0");
- exit;
- }
- if (!db_check_from()) {
- sl_send_reply("403","Forbidden auth ID");
- exit;
- }
- consume_credentials();
- # caller authenticated
- } else {
- # if caller is not local, then called number must be local
- if (!uri==myself) {
- send_reply("403","Rely forbidden");
- exit;
- }
- }
- }
- # preloaded route checking
- if (loose_route()) {
- xlog("L_ERR",
- "Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]");
- if (!is_method("ACK"))
- sl_send_reply("403","Preload Route denied");
- exit;
- }
- # record routing
- if (!is_method("REGISTER|MESSAGE"))
- record_route();
- # account only INVITEs
- if (is_method("INVITE")) {
- # create dialog with timeout
- if ( !create_dialog("B") ) {
- send_reply("500","Internal Server Error");
- exit;
- }
- setflag(ACC_DO); # do accounting
- }
- if (!uri==myself) {
- append_hf("P-hint: outbound\r\n");
- route(relay);
- }
- # requests for my domain
- if (is_method("PUBLISH|SUBSCRIBE"))
- {
- sl_send_reply("503", "Service Unavailable");
- exit;
- }
- if (is_method("REGISTER"))
- {
- # authenticate the REGISTER requests
- if (!www_authorize("", "subscriber"))
- {
- www_challenge("", "0");
- exit;
- }
- if (!db_check_to())
- {
- sl_send_reply("403","Forbidden auth ID");
- exit;
- }
- if ( proto==TCP || 0 ) setflag(TCP_PERSISTENT);
- if (!save("location"))
- sl_reply_error();
- exit;
- }
- if ($rU==NULL) {
- # request with no Username in RURI
- sl_send_reply("484","Address Incomplete");
- exit;
- }
- # do lookup with method filtering
- if (!lookup("location","m")) {
- if (!db_does_uri_exist()) {
- send_reply("420","Bad Extension");
- exit;
- }
- t_newtran();
- t_reply("404", "Not Found");
- exit;
- }
- # when routing via usrloc, log the missed calls also
- setflag(ACC_MISSED);
- route(relay);
- }
- route[relay] {
- # for INVITEs enable some additional helper routes
- if (is_method("INVITE")) {
- t_on_branch("per_branch_ops");
- t_on_reply("handle_nat");
- t_on_failure("missed_call");
- }
- if (!t_relay()) {
- send_reply("500","Internal Error");
- };
- exit;
- }
- branch_route[per_branch_ops] {
- xlog("new branch at $ru\n");
- }
- onreply_route[handle_nat] {
- xlog("incoming reply\n");
- }
- failure_route[missed_call] {
- if (t_was_cancelled()) {
- exit;
- }
- # uncomment the following lines if you want to block client
- # redirect based on 3xx replies.
- ##if (t_check_status("3[0-9][0-9]")) {
- ##t_reply("404","Not found");
- ## exit;
- ##}
- }
- local_route {
- if (is_method("BYE") && $DLG_dir=="UPSTREAM") {
- acc_db_request("200 Dialog Timeout", "acc");
- }
- }
检测配置文件语法
# ./opensips -C
创建数据库
# cd /usr/local/opensips/sbin
# ./opensipsdbctl create
![](https://i-blog.csdnimg.cn/blog_migrate/ef277bbe906b9e5c870369ad73c7cbb6.png)
# ./opensipsctl start
如果有报错,可以查看/var/log/messages 查看![](https://i-blog.csdnimg.cn/blog_migrate/976e51e71723791d9aaf85f797fa6511.png)
![](https://i-blog.csdnimg.cn/blog_migrate/a7b410284755c4360f4c44616baa1a49.png)
添加账号
# ./opensipsctl add 1000 1000
# ./opensipsctl add 2000 2000
添加的账号在数据库subscriber表中
查看在线用户
# ./opensipsctl ul show
# ./opensipsctl online
可以使用X-lite相互拨号测试
![](https://i-blog.csdnimg.cn/blog_migrate/e9c9ce1c9dab559136ea94cd7188e199.png)
![](https://i-blog.csdnimg.cn/blog_migrate/3e4a308be1412d86bfe87aa568e6edcc.png)