1、修改配置文件
cat docker-compose.yaml
version: '3.1'
services:
mariadb:
image: mariadb:10.4.7
restart: always
container_name: mariadb
ports:
# 端口映射
- 3306:3306
volumes:
# 容器与宿主机时间同步
- /etc/localtime:/etc/localtime
# 数据库目录映射
- ./config/mariadb:/var/lib/mysql
# 数据库配置文件映射
#- /home/mysql/config/mariadb-config/my.cnf:/etc/mysql/my.cnf
#如果要使用自定义的MySQL配置,则可以在主机上的目录中创建备用配置文件,然后将该目录位置/etc/mysql/conf.d安装在mariadb容器内。
- ./config/mariadb-config:/etc/mysql/conf.d
environment:
TIME_ZONE: Asia/Shanghai
MYSQL_ROOT_PASSWORD: 123456
#MYSQL_ROOT_PASSWORD: ${q1w2E#R$}
配置文件存放位置 ./config/mariadb-config/my.cnf (可配置可不配)
my.cnf (本文末尾有参考文件)
2、启动
docker-compose up -d
注:如果出现如下问题:
[root@localhost mysql]# docker-compose up -d
Creating network "mysql_default" with the default driver
ERROR: Failed to Setup IP tables: Unable to enable SKIP DNAT rule: (iptables failed: iptables --wait -t nat -I DOCKER -i br-bc4fb14edbe6 -j RETURN: iptables: No chain/target/match by that name.
(exit status 1))
重启docker(因为关闭防火墙docker需要重启)
systemctl restart docker
3、安装客户端,修改密码
mysql -h 172.21.60.2 -u root -P 3306 -p
ALTER USER 'root'@'%' IDENTIFIED BY 'q1w2E#R$$';
参考文件
my.cnf 配置文件
# MariaDB database server configuration file.
#
# You can copy this file to one of:
# - "/etc/mysql/my.cnf" to set global options,
# - "~/.my.cnf" to set user-specific options.
#
# One can use all long options that the program supports.
# Run program with --help to get a list of available options and with
# --print-defaults to see which it would actually understand and use.
#
# For explanations see
# http://dev.mysql.com/doc/mysql/en/server-system-variables.html
# This will be passed to all mysql clients
# It has been reported that passwords should be enclosed with ticks/quotes
# escpecially if they contain "#" chars...
# Remember to edit /etc/mysql/debian.cnf when changing the socket location.
[client]
port = 3306
socket = /var/run/mysqld/mysqld.sock
# Here is entries for some specific programs
# The following values assume you have at least 32M ram
# This was formally known as [safe_mysqld]. Both versions are currently parsed.
[mysqld_safe]
socket = /var/run/mysqld/mysqld.sock
nice = 0
[mysqld]
#
# * Basic Settings
#
#user = mysql
lower_case_table_names = 1
pid-file = /var/run/mysqld/mysqld.pid
socket = /var/run/mysqld/mysqld.sock
port = 3306
basedir = /usr
datadir = /var/lib/mysql
tmpdir = /tmp
lc_messages_dir = /usr/share/mysql
lc_messages = en_US
skip-external-locking
#
# Instead of skip-networking the default is now to listen only on
# localhost which is more compatible and is not less secure.
#bind-address = 127.0.0.1
#
# * Fine Tuning
#
max_connections = 1000
connect_timeout = 5
wait_timeout = 600
max_allowed_packet = 16M
thread_cache_size = 128
sort_buffer_size = 4M
bulk_insert_buffer_size = 16M
tmp_table_size = 32M
max_heap_table_size = 32M
#
# * MyISAM
#
# This replaces the startup script and checks MyISAM tables if needed
# the first time they are touched. On error, make copy and try a repair.
myisam_recover_options = BACKUP
key_buffer_size = 128M
#open-files-limit = 2000
table_open_cache = 400
myisam_sort_buffer_size = 512M
#concurrent_insert = 4
#read_buffer_size = 2M
#read_rnd_buffer_size = 1M
#
# * Query Cache Configuration
#
# Cache only tiny result sets, so we can fit more in the query cache.
query_cache_limit = 128K
#query_cache_size = 64M
# for more write intensive setups, set to DEMAND or OFF
#query_cache_type = DEMAND
#
# * Logging and Replication
#
# Both location gets rotated by the cronjob.
# Be aware that this log type is a performance killer.
# As of 5.1 you can enable the log at runtime!
#general_log_file = /var/log/mysql/mysql.log
#general_log = 1
#
# Error logging goes to syslog due to /etc/mysql/conf.d/mysqld_safe_syslog.cnf.
#
# we do want to know about network errors and such
#log_warnings = 2
#
# Enable the slow query log to see queries with especially long duration
#slow_query_log[={0|1}]
slow_query_log_file = /var/log/mysql/mariadb-slow.log
long_query_time = 10
#log_slow_rate_limit = 1000
#log_slow_verbosity = query_plan
#log-queries-not-using-indexes
#log_slow_admin_statements
#
# The following can be used as easy to replay backup logs or for replication.
# note: if you are setting up a replication slave, see README.Debian about
# other settings you may need to change.
#server-id = 1
#report_host = master1
#auto_increment_increment = 2
#auto_increment_offset = 1
#log_bin = /var/log/mysql/mariadb-bin
#log_bin_index = /var/log/mysql/mariadb-bin.index
# not fab for performance, but safer
#sync_binlog = 1
expire_logs_days = 10
max_binlog_size = 100M
# slaves
#relay_log = /var/log/mysql/relay-bin
#relay_log_index = /var/log/mysql/relay-bin.index
#relay_log_info_file = /var/log/mysql/relay-bin.info
#log_slave_updates
#read_only
#
# If applications support it, this stricter sql_mode prevents some
# mistakes like inserting invalid dates etc.
#sql_mode = NO_ENGINE_SUBSTITUTION,TRADITIONAL
#
# * InnoDB
#
# InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/.
# Read the manual for more InnoDB related options. There are many!
default_storage_engine = InnoDB
# you can't just change log file size, requires special procedure
#innodb_log_file_size = 50M
#innodb_buffer_pool_size = 256M
innodb_log_buffer_size = 8M
innodb_file_per_table = 1
innodb_open_files = 400
innodb_io_capacity = 400
innodb_flush_method = O_DIRECT
#tunning memory
innodb_buffer_pool_size = 20G
innodb_buffer_pool_instances=10
sort_buffer_size=12M
read_buffer_size=8M
read_rnd_buffer_size=50M
join_buffer_size=8M
query_cache_size=1024M
thread_concurrency=32 #CPU核数 * 2
#
# * Security Features
#
# Read the manual, too, if you want chroot!
# chroot = /var/lib/mysql/
#
# For generating SSL certificates I recommend the OpenSSL GUI "tinyca".
#
# ssl-ca=/etc/mysql/cacert.pem
# ssl-cert=/etc/mysql/server-cert.pem
# ssl-key=/etc/mysql/server-key.pem
#
# * Galera-related settings
#
[galera]
# Mandatory settings
#wsrep_on=ON
#wsrep_provider=
#wsrep_cluster_address=
#binlog_format=row
#default_storage_engine=InnoDB
#innodb_autoinc_lock_mode=2
#
# Allow server to accept connections on all interfaces.
#
#bind-address=0.0.0.0
#
# Optional setting
#wsrep_slave_threads=1
#innodb_flush_log_at_trx_commit=0
[mysqldump]
quick
quote-names
max_allowed_packet = 16M
[mysql]
#no-auto-rehash # faster start of mysql but no tab completion
[isamchk]
key_buffer = 16M
#
# * IMPORTANT: Additional settings that can override those from this file!
# The files must end with '.cnf', otherwise they'll be ignored.
#
!include /etc/mysql/mariadb.cnf
!includedir /etc/mysql/conf.d/