【H.264】H.264详解（二）—— H264视频码流解析示例源码

声明：此篇示例源码非原创，原作者雷霄骅。雷霄骅，中国传媒大学通信与信息系统专业博士生，在此向雷霄骅雷神致敬。
代码原文地址：视音频数据处理入门：H.264视频码流解析

一、前言

示例源码是一个H.264码流解析程序。该程序可以从H.264码流中分析得到它的基本单元NALU，分离出NALU，然后再分析NALU的各个字段。

关于NALU的相关内容可参考文章【H.264】H.264详解（一）—— 一文看懂H.264协议

二、示例源码

【1】目录结构

project/
├── Makefile
├── h264parser.c
├── sintel.h264

【2】Makefile源码

app:h264parser.c
	gcc -o app h264parser.c
clean:
	rm -f app

【3】h264parser.c源码

#include <stdio.h>
#include <stdlib.h>
#include <string.h>

typedef enum {
	NALU_TYPE_SLICE    = 1,
	NALU_TYPE_DPA      = 2,
	NALU_TYPE_DPB      = 3,
	NALU_TYPE_DPC      = 4,
	NALU_TYPE_IDR      = 5,
	NALU_TYPE_SEI      = 6,
	NALU_TYPE_SPS      = 7,
	NALU_TYPE_PPS      = 8,
	NALU_TYPE_AUD      = 9,
	NALU_TYPE_EOSEQ    = 10,
	NALU_TYPE_EOSTREAM = 11,
	NALU_TYPE_FILL     = 12,
} NaluType;

typedef enum {
	NALU_PRIORITY_DISPOSABLE = 0,
	NALU_PRIRITY_LOW         = 1,
	NALU_PRIORITY_HIGH       = 2,
	NALU_PRIORITY_HIGHEST    = 3
} NaluPriority;

typedef struct{
	int startcodeprefix_len;      //! 4 for parameter sets and first slice in picture, 3 for everything else (suggested)
	unsigned len;                 //! Length of the NAL unit (Excluding the start code, which does not belong to the NALU)
	unsigned max_size;            //! Nal Unit Buffer size
	int forbidden_bit;            //! should be always FALSE
	int nal_reference_idc;        //! NALU_PRIORITY_xxxx
	int nal_unit_type;            //! NALU_TYPE_xxxx    
	char *buf;                    //! contains the first byte followed by the EBSP
} NALU_t;

FILE *h264bitstream = NULL;                //!< the bit stream file

int info2=0, info3=0;

static int FindStartCode2 (unsigned char *Buf){
	if(Buf[0]!=0 || Buf[1]!=0 || Buf[2] !=1) return 0; //0x000001?
	else return 1;
}

static int FindStartCode3 (unsigned char *Buf){
	if(Buf[0]!=0 || Buf[1]!=0 || Buf[2] !=0 || Buf[3] !=1) return 0;//0x00000001?
	else return 1;
}


int GetAnnexbNALU (NALU_t *nalu){
	int pos = 0;
	int StartCodeFound, rewind;
	unsigned char *Buf;

	if ((Buf = (unsigned char*)calloc (nalu->max_size , sizeof(char))) == NULL) 
		printf ("GetAnnexbNALU: Could not allocate Buf memory\n");

	nalu->startcodeprefix_len=3;

	if (3 != fread (Buf, 1, 3, h264bitstream)){
		free(Buf);
		return 0;
	}
	info2 = FindStartCode2 (Buf);
	if(info2 != 1) {
		if(1 != fread(Buf+3, 1, 1, h264bitstream)){
			free(Buf);
			return 0;
		}
		info3 = FindStartCode3 (Buf);
		if (info3 != 1){ 
			free(Buf);
			return -1;
		}
		else {
			pos = 4;
			nalu->startcodeprefix_len = 4;
		}
	}
	else{
		nalu->startcodeprefix_len = 3;
		pos = 3;
	}
	StartCodeFound = 0;
	info2 = 0;
	info3 = 0;

	while (!StartCodeFound){
		if (feof (h264bitstream)){
			nalu->len = (pos-1)-nalu->startcodeprefix_len;
			memcpy (nalu->buf, &Buf[nalu->startcodeprefix_len], nalu->len);     
			nalu->forbidden_bit = nalu->buf[0] & 0x80; //1 bit
			nalu->nal_reference_idc = nalu->buf[0] & 0x60; // 2 bit
			nalu->nal_unit_type = (nalu->buf[0]) & 0x1f;// 5 bit
			free(Buf);
			return pos-1;
		}
		Buf[pos++] = fgetc (h264bitstream);
		info3 = FindStartCode3(&Buf[pos-4]);
		if(info3 != 1)
			info2 = FindStartCode2(&Buf[pos-3]);
		StartCodeFound = (info2 == 1 || info3 == 1);
	}

	// Here, we have found another start code (and read length of startcode bytes more than we should
	// have.  Hence, go back in the file
	rewind = (info3 == 1)? -4 : -3;

	if (0 != fseek (h264bitstream, rewind, SEEK_CUR)){
		free(Buf);
		printf("GetAnnexbNALU: Cannot fseek in the bit stream file");
	}

	// Here the Start code, the complete NALU, and the next start code is in the Buf.  
	// The size of Buf is pos, pos+rewind are the number of bytes excluding the next
	// start code, and (pos+rewind)-startcodeprefix_len is the size of the NALU excluding the start code

	nalu->len = (pos+rewind)-nalu->startcodeprefix_len;
	memcpy (nalu->buf, &Buf[nalu->startcodeprefix_len], nalu->len);//
	nalu->forbidden_bit = nalu->buf[0] & 0x80; //1 bit
	nalu->nal_reference_idc = nalu->buf[0] & 0x60; // 2 bit
	nalu->nal_unit_type = (nalu->buf[0]) & 0x1f;// 5 bit
	free(Buf);

	return (pos+rewind);
}

/**
 * Analysis H.264 Bitstream
 * @param url    Location of input H.264 bitstream file.
 */
int simplest_h264_parser(char *url){
	NALU_t *n = NULL;
	int buffersize=100000;

	//FILE *myout=fopen("output_log.txt","wb+");
	FILE *myout=stdout;

	h264bitstream=fopen(url, "rb+");
	if (h264bitstream==NULL){
		printf("Open file error\n");
		return 0;
	}

	n = (NALU_t*)calloc (1, sizeof(NALU_t));
	if (n == NULL){
		printf("Alloc NALU Error\n");
		return 0;
	}

	n->max_size=buffersize;
	n->buf = (char*)calloc (buffersize, sizeof(char));
	if (n->buf == NULL){
		free (n);
		printf ("AllocNALU: n->buf");
		return 0;
	}

	int data_offset=0;
	int nal_num=0;
	printf("-----+-------- NALU Table ------+---------+\n");
	printf(" NUM |   POS   |   IDC  |  TYPE |   LEN   |\n");
	printf("-----+---------+--------+-------+---------+\n");

	while(!feof(h264bitstream)){
		int data_lenth;
		data_lenth=GetAnnexbNALU(n);

		char type_str[20]={0};
		switch(n->nal_unit_type){
			case NALU_TYPE_SLICE:sprintf(type_str,"SLICE");break;
			case NALU_TYPE_DPA:sprintf(type_str,"DPA");break;
			case NALU_TYPE_DPB:sprintf(type_str,"DPB");break;
			case NALU_TYPE_DPC:sprintf(type_str,"DPC");break;
			case NALU_TYPE_IDR:sprintf(type_str,"IDR");break;
			case NALU_TYPE_SEI:sprintf(type_str,"SEI");break;
			case NALU_TYPE_SPS:sprintf(type_str,"SPS");break;
			case NALU_TYPE_PPS:sprintf(type_str,"PPS");break;
			case NALU_TYPE_AUD:sprintf(type_str,"AUD");break;
			case NALU_TYPE_EOSEQ:sprintf(type_str,"EOSEQ");break;
			case NALU_TYPE_EOSTREAM:sprintf(type_str,"EOSTREAM");break;
			case NALU_TYPE_FILL:sprintf(type_str,"FILL");break;
		}
		char idc_str[20]={0};
		switch(n->nal_reference_idc>>5){
			case NALU_PRIORITY_DISPOSABLE:sprintf(idc_str,"DISPOS");break;
			case NALU_PRIRITY_LOW:sprintf(idc_str,"LOW");break;
			case NALU_PRIORITY_HIGH:sprintf(idc_str,"HIGH");break;
			case NALU_PRIORITY_HIGHEST:sprintf(idc_str,"HIGHEST");break;
		}

		fprintf(myout,"%5d| %8d| %7s| %6s| %8d|\n",nal_num,data_offset,idc_str,type_str,n->len);

		data_offset=data_offset+data_lenth;

		nal_num++;
	}

	//Free
	if (n){
		if (n->buf){
			free(n->buf);
			n->buf=NULL;
		}
		free (n);
	}
	return 0;
}

int main(int argc, char* argv[]){
	simplest_h264_parser("sintel.h264");

	return 0;
}

【4】编译运行

【5】源码下载地址

H.264详解（二）- H264视频码流解析示例源码