Debug Mini2440 on Ubuntu

1:usb转串口，usb转串口芯片为pl2303，ubuntu10.04带了该芯片的驱动，插上usb后通过dmesg可以查看驱动打印的信息

 

[   97.620050] usb 5-2: new full speed USB device using ohci_hcd and address 2

[   97.787229] usb 5-2: configuration #1 chosen from 1 choice

[   97.823419] usbcore: registered new interface driver usbserial

[   97.823444] USB Serial support registered for generic

[   97.823484] usbcore: registered new interface driver usbserial_generic

[   97.823486] usbserial: USB Serial Driver core

[   97.857054] USB Serial support registered for pl2303

[   97.857085] pl2303 5-2:1.0: pl2303 converter detected

[   97.878317] usb 5-2: pl2303 converter now attached to ttyUSB0

[   97.878530] usbcore: registered new interface driver pl2303

[   97.878533] pl2303: Prolific PL2303 USB to serial adaptor driver

通过lsusb也可以查看

Bus 005 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port

2：sudo apt-get install minicom

3: sudo minicom -D /dev/ttyUSB0,并在设置中把硬件流控去掉就可以正常使用了。

4：dnw的linux版本，可以在arm9bbs上下载

5：make,

     sudo insmod secbulk.ko

     sudo ./dnw xxx

Done!