cisco 命令 路由 是实现 不同的 vlan 通信

R1:
interface FastEthernet0/0
no ip address
duplex full
!
interface FastEthernet0/0.10
encapsulation dot1Q 10
ip address 192.168.10.1 255.255.255.0
!
interface FastEthernet0/0.11
encapsulation dot1Q 11
ip address 192.168.11.1 255.255.255.0
!
--------------------

R3:
!
interface FastEthernet0/0
ip address 192.168.10.2 255.255.255.0
duplex full
!
ip default-gateway 192.168.10.1

---------------

R4:
interface FastEthernet0/0
ip address 192.168.11.2 255.255.255.0
duplex full
!         
ip default-gateway 192.168.11.1

------------------

S1:
!
interface FastEthernet0/0
switchport trunk allowed vlan 1,10,11,1002-1005
switchport mode trunk
!
interface FastEthernet0/1
switchport access vlan 10
!
interface FastEthernet0/2
switchport access vlan 11

interface Vlan1
ip address 192.168.1.2 255.255.255.0
no ip route-cache
!
interface Vlan10
no ip address
no ip route-cache
!
interface Vlan11
no ip address
no ip route-cache

------------------

S1 MAC address table

switch-1#show mac-address-table
Destination Address  Address Type  VLAN  Destination Port
-------------------  ------------  ----  --------------------
cc00.0f44.0000          Self          1     Vlan1
cc00.0f44.0000          Self         10     Vlan10
cc00.0f44.0000          Self         11     Vlan11
ca00.0f94.0000          Dynamic      10     FastEthernet0/1
ca00.1778.0000          Dynamic       1     FastEthernet0/0
ca00.1350.0000          Dynamic      11     FastEthernet0/2
ca00.1778.0000          Dynamic      11     FastEthernet0/0

 

 

也可以参考

http://wenku.baidu.com/view/54e2bbf67c1cfad6195fa70f.html