Z-Wave Battery Support Basics ZWAVE如何实时控制电池供电设备

最新推荐文章于 2020-10-21 10:11:02 发布

飞越丛林

最新推荐文章于 2020-10-21 10:11:02 发布

阅读量1.7k

点赞数 1

分类专栏： IOT 文章标签： ZWAVE battery powered FLiRS

本文链接：https://blog.csdn.net/junglefly/article/details/53332487

版权

Z-Wave通过FLiRS技术实现了对外界电源和电池供电设备的实时控制，同时兼顾电池寿命。电池设备如门锁在大部分时间休眠，但在特定间隔醒来监听命令。FLiRS利用'beaming'技术快速唤醒设备，减少电池消耗。WakeUp Nodes则以较长间隔醒来，用于周期性通信和健康监测。

摘要由CSDN通过智能技术生成

Z-Wave Battery Support Basics

qq:380939960

Mains powered devices and battery devicesconfigured as Frequently Listening Routing Slave (FLiRS) can be controlled atany time. 外界电源供电的设备，以及被配置为FLiRS的电池供电设备，都可以在任何时刻被控制。

Power source: Mains powered devices areaccessible immediately and are always listening devices. Battery powereddevices focus on battery lifetime extension as one of the primary objectives. 外界电源供电的设备由于不太需要看看电池寿命，因此可以立即被访问，也始终处于侦听状态。而电池供电设备的主要关注点是如何尽可能低延长电池的工作寿命。

FLiRS: Frequently listening Routing Slave; Abattery-powered node type which may be reached within a few 100 ms. Typicallyused for applications such as door bells, networked smoke alarms, etc. 这种类型的节点虽然是电池供电的，但是可以在100ms内控制和访问它。典型的应用是门铃（door bells），门锁，联网的烟感传感器(networked smoke alarms)等等。

Wake-up Node: A battery-powered node typewhich stays in low power mode for long periods. When waking up, it may just doa single measurement before returning to sleep. The node autonomously decideswhen to send a report or a WakeUpNotification to a mailbox node.WakeUpNotifications may be sent at very long intervals. 这种节点是电池供电的节点类型，长期处于低功耗模式。当醒来时，它可以在返回睡眠之前仅进行一次测量工作。这种节点自主决定何时向mailbox节点发送测量报告或WakeUpNotificatio