DNW For Tiny6410

由于开发环境迁移到了Redhat6.2环境上，估重新整理了dnw for linux，以下代码均已通过验证=

/* dnw linux main file. This depends on libusb.  
* You should use lsusb to find out the actual vender ID & product ID of board.  
* License:    GPL  
*/  
#include <stdio.h>   
#include <usb.h>   
#include <errno.h>   
#include <sys/stat.h>   
#include <fcntl.h>   
#include <unistd.h>   
#define QQ2440_VENDOR_ID        0x5345   
#define QQ2440_PRODUCT_ID       0x1234   
#define FS2410_VENDOR_ID        0x5345   
#define FS2410_PRODUCT_ID       0x1234   
#define EZ6410_VENDOR_ID        0x5345   
#define EZ6410_PRODUCT_ID       0x1234   
#define EZ6410_RAM_BASE         0x50200000   
#define FS2410_RAM_BASE         0x30200000   
/*  
// FS2410  
#define RAM_BASE            FS2410_RAM_BASE  
#define VENDOR_ID           FS2410_VENDOR_ID  
#define PRODUCT_ID          FS2410_PRODUCT_ID  
*/  
// EZ6410   
#define RAM_BASE            EZ6410_RAM_BASE   
#define VENDOR_ID           EZ6410_VENDOR_ID   
#define PRODUCT_ID          EZ6410_PRODUCT_ID   
struct usb_dev_handle * open_port()   
{   
    struct usb_bus *busses, *bus;   
    usb_init();   
    usb_find_busses();   
    usb_find_devices();   
    busses = usb_get_busses();   
    for(bus=busses;bus;bus=bus->next)   
    {   
        struct usb_device *dev;   
        for(dev=bus->devices;dev;dev=dev->next)   
        {   
            if( VENDOR_ID==dev->descriptor.idVendor   
            &&  PRODUCT_ID==dev->descriptor.idProduct)   
            {   
                printf("Target usb device found!\n");   
                struct usb_dev_handle *hdev = usb_open(dev);   
                if(!hdev)   
                {   
                    perror("Cannot open device");      
                }   
                else  
                {   
                    if(0!=usb_claim_interface(hdev, 0))   
                    {   
                        perror("Cannot claim interface");   
                        usb_close(hdev);   
                        hdev = NULL;   
                    }   
                }   
                return hdev;   
            }   
        }   
    }   
      
    printf("Target usb device not found!\n");   
    return NULL;   
}   
void usage()   
{   
    printf("Usage: dnw2 <file>\n\n");   
}   
static u_int16_t ace_csum(const unsigned char *data, u_int32_t len)   
{   
        u_int16_t csum = 0;   
        int j;   
        for (j = 0; j < len; j ++) {   
                csum += data[j];   
        }   
        return csum;   
}   
unsigned char* prepare_write_buf(char *filename, unsigned int *len)   
{   
    unsigned char *write_buf = NULL;   
    struct stat fs;   
    int fd = open(filename, O_RDONLY);   
    if(-1==fd)   
    {   
        perror("Cannot open file");   
        return NULL;   
    }   
    if(-1==fstat(fd, &fs))   
    {   
        perror("Cannot get file size");   
        goto error;   
    }   
    write_buf = (unsigned char*)malloc(fs.st_size+10);   
    if(NULL==write_buf)   
    {   
        perror("malloc failed");   
        goto error;   
    }   
    if(fs.st_size != read(fd, write_buf+8, fs.st_size))   
    {   
        perror("Reading file failed");   
        goto error;   
    }   
    printf("Filename : %s\n", filename);   
    printf("Filesize : %lu bytes\n", fs.st_size);   
    *((u_int32_t*)write_buf) = RAM_BASE;        //download address   
    *((u_int32_t*)write_buf+1) = fs.st_size + 10;    //download size;   
    *len = fs.st_size + 10;   
       
    // calculate checksum value   
    u_int16_t csum = ace_csum(write_buf+8, fs.st_size);   
    *(write_buf+fs.st_size+8) = csum & 0xff;   
    *(write_buf+fs.st_size+9) = (csum >> 8) & 0xff;   
    return write_buf;   
error:   
    if(fd!=-1) close(fd);   
    if(NULL!=write_buf) free(write_buf);   
    fs.st_size = 0;   
    return NULL;   
      
}   
int main(int argc, char *argv[])   
{   
    if(2!=argc)   
    {   
        usage();   
        return 1;   
    }   
    struct usb_dev_handle *hdev = open_port();   
    if(!hdev)   
    {   
        return 1;   
    }   
    unsigned int len = 0;   
    unsigned char* write_buf = prepare_write_buf(argv[1], &len);   
    if(NULL==write_buf) return 1;   
    unsigned int remain = len;   
    unsigned int towrite;   
    printf("Writing data ...\n");   
    while(remain)   
    {   
        towrite = remain>512 ? 512 : remain;   
        if(towrite != usb_bulk_write(hdev, 0x02, write_buf+(len-remain), towrite, 3000))   
        {   
            perror("usb_bulk_write failed");   
            break;   
        }   
        remain-=towrite;   
        printf("\r%d%%\t %d bytes     ", (len-remain)*100/len, len-remain);   
        fflush(stdout);   
    }   
    if(0==remain) printf("Done!\n");   
    return 0;   
}