路由实验3

配置

lsw2

[sw2]int GigabitEthernet 0/0/3

[sw2-GigabitEthernet0/0/3]port default vlan 3

[sw2]interface GigabitEthernet 0/0/1

[sw2-GigabitEthernet0/0/1]port link-type trunk 

[sw2-GigabitEthernet0/0/1]port trunk allow-pass vlan all

ar1

[r1]ospf 1 router-id 1.1.1.1

[r1-ospf-1]area 0

[r1-ospf-1-area-0.0.0.0]network 192.168.1.0 0.0.0.15

[r1-ospf-1-area-0.0.0.0]network 192.168.1.33 0.0.0.0

[r1]interface GigabitEthernet 0/0/0

[r1-GigabitEthernet0/0/0]ospf dr-priority 0

ar2

[r2]interface GigabitEthernet 0/0/0

[r2-GigabitEthernet0/0/0]ip address 192.168.1.34 28

[r2]interface LoopBack 0

[r2-LoopBack0]ip address 192.168.1.17 28

[r2]ospf 1 router-id 2.2.2.2

[r2-ospf-1-area-0.0.0.0]network 192.168.1.16 0.0.0.15

[r2-ospf-1-area-0.0.0.0]network 192.168.1.34 0.0.0.0

[r2]interface GigabitEthernet 0/0/0

[r2-GigabitEthernet0/0/0]ospf dr-priority 0

ar3

ar4

[r4]interface GigabitEthernet 0/0/0

[r4-GigabitEthernet0/0/0]ip address 192.168.1.130 30

[r4]interface LoopBack 0

[r4-LoopBack0]ip address 4.4.4.1 24

[r4]ospf 1 router-id 4.4.4.4

[r4-ospf-1]area 1

[r4-ospf-1-area-0.0.0.1]network 192.168.1.130 0.0.0.0

ping

pc1

pc2

 

ar1