Updating U-Boot Using U-Boot
1. Set device network information as below on Uboot prompt.
setenv serverip <TFTP SERVER IP ADDRESS>
setenv ipaddr <DEVICE IP ADDRESS>
setenv ethaddr <DEVICE MAC ADDRESS>
2. Put the the U-boot binary file to the directory /tftpboot at <TFTP SERVER >
3. Run command as below to copy the U-boot to the device.
tftp 0x80700000 u-boot.bin
4. Now copy u-boot from RAM to NAND by following commands.
nand erase 0x28000 0x20000
nand write 0x80700000 0x28000 0x20000
5. Reset the board
Updating U-boot using U-boot
最新推荐文章于 2024-04-16 20:44:37 发布