19c-rac 心跳网卡绑定模式

bestsun999

已于 2023-08-03 20:36:55 修改

阅读量878

点赞数

分类专栏： Linux Oracle_19c 文章标签： oracle linux

于 2023-06-01 15:53:25 首次发布

本文链接：https://blog.csdn.net/kevinyu998/article/details/130989701

版权

Linux 同时被 2 个专栏收录

57 篇文章 1 订阅

订阅专栏

Oracle_19c

49 篇文章 0 订阅

订阅专栏

心跳网卡使用了bonding，但在rac部署检测时发现节点db1和db2的网络接口bonding模式设置为非推荐的802.3ad，推荐的是0（balance-rr）或1（active-backup）。修正配置为推荐模式后，错误不再出现。

摘要由CSDN通过智能技术生成

心跳网卡采用了2个网卡bond，rac部署检测的时候报错如下

Network interface bonding status of private interconnect network interfaces - Checks if the network bonding feature, if used for private interconnect network interfaces, is configured using correct bonding mode?Error:
??PRVE-0464 : Network bonding feature is enabled on nodes "db1,db2" with a bonding mode discouraged for cluster private interconnect usage. ? Cause:?An incorrect bonding mode was used for the network bonds in which private interconnect network interfaces participate on the indicated nodes. ? Action:?Ensure that the network bonding mode is set to the recommended value of 0 or 1 for all the network bonds in which private interconnect network interfaces participate.

Verification WARNING result on node: db1 燚etails:
??PRVE-0463 : Network bonding feature is enabled on node "db1" with bonding mode "802.3ad" which is not a recommended value of 0 "balance-rr" or 1 "active-backup" for private interconnect network interfaces "eno2,eno1" ? Cause:?The bonding mode specified for the network interfaces used as private cluster interconnect was not a recommended value. ? Action:?Configure network bonding mode 0 or 1 on interfaces used for private cluster interconnect.

Verification WARNING result on node: db2 燚etails:
??PRVE-0463 : Network bonding feature is enabled on node "db2" with bonding mode "802.3ad" which is not a recommended value of 0 "balance-rr" or 1 "active-backup" for private interconnect network interfaces "eno2,eno1" ? Cause:?The bonding mode specified for the network interfaces used as private cluster interconnect was not a recommended value. ? Action:?Configure network bonding mode 0 or 1 on interfaces used for private cluster interconnect.

BONDING_OPTS='mode=4 miimon=100 primary=eno1 updelay=0 downdelay=0 num_grat_arp=50'