LED显示（4）：正常显示与关闭

正常显示与关闭

代码：

#include <linux/init.h> #include <linux/module.h> #include <linux/kernel.h> #define LED_OE 0x20 #define LED_D 0x00 #define LED_S0 0x10 #define LED_S1 0x20 #define LEDCS 0x04 #define FLAG_OE 0x20350000 #define FLAG_INER 0x20360000 #define FLAG_B 0x20380000 #define DATA_OUT 0x20390000 #define led_enable *(volatile unsigned char *)(FLAG_OE) #define write_trig *(volatile unsigned short *)(FLAG_INER) #define disp_select *(volatile unsigned short *)(FLAG_B) #define data2disp *(volatile unsigned short *)(DATA_OUT) const unsigned int led_code[10] = {0x3f, 0x06, 0x5b, 0x4f, 0x66, 0x6d, 0x7d, 0x27, 0x7f, 0x6f}; static inline void udelay(volatile int us) { volatile int i; while(us--) for(i = 30; i > 0; i--); } static inline void mdelay(volatile int ms) { while(ms--) { udelay(700); } } static void led_init(void) { led_enable = (0xff & (~LED_OE)); //mdelay(1); } static inline void led_delet(void) { //led_enable |= LED_OE; led_enable = 0xff; } static void led_display(unsigned char led_num, unsigned char data) { printk(KERN_INFO "led_num:%d data:%d/n", led_num, data); switch(led_num) { case 1: disp_select = LED_D; break; case 2: disp_select = LED_S0; break; case 3: disp_select = LED_S1; break; default: printk("ERROR!/n"); break; } data2disp = led_code[data]; write_trig = 0x00; //mdelay(1000); write_trig = LEDCS; } static int __init sample_module_init(void) { printk(KERN_INFO "init led module /n"); led_init(); led_display(1, 1); mdelay(1000); led_display(2, 2); return 0; } static void __exit sample_module_cleanup(void) { printk(KERN_INFO "cleanup led module /n"); led_display(3, 3); mdelay(1000); led_display(4, 4); led_delet(); } module_init(sample_module_init); module_exit(sample_module_cleanup); MODULE_DESCRIPTION("sample module"); MODULE_LICENSE("GPL");  

小bug：该函数结束之后还是保存最后显示的数据，觉得还是CPLD硬件的问题，
1. led_display(1, 1);
2. led_display(2, 2);
3. led_display(3, 3);
1.2显示之后，执行显示3  ，1。2 都还是在显示的。类似的模块关卸载后重新加载之前的数还是会显示出来
当然在关闭在前对它们进行写0叫他们都不亮这样就看不出来了，知道了就好了问题不是太大，能正常显示和关闭是关键。