毕设成品 基于单片机万用表量程手动自动电阻电流电压设计

量程：电流20-100mA和0-20mA ；电压0-1v和1-5v；电阻0-500和500-1000。手动量程和自动量程，默认是手动切换量程。

​

    #include 
    #include 
    #define uchar	unsigned char
    #define uint	unsigned int
    /***************引脚声明*********************/
    #define lcd P0
    sbit	rs	= P2 ^ 7;       /* LCD液晶控制端 */
    sbit	en	= P2 ^ 6;
    sbit	SPK	= P1 ^ 7;       /* 蜂鸣器引脚 */
    sbit	CS	= P1 ^ 2;       /* 将CS位定义为P1.2引脚 */
    sbit	CLK	= P1 ^ 0;       /* 将CLK位定义为P1.0引脚 */
    sbit	DIO	= P1 ^ 1;       /* 将DIO位定义为P1.1引脚 */
    sbit	key	= P2 ^ 5;       /* 定义按键引脚 */
    sbit	a	= P2 ^ 0;       /* 模拟量通道选择端 */
    sbit	b	= P2 ^ 1;       /* 模拟量通道选择端 */
    sbit	c	= P2 ^ 2;       /* 模拟量通道选择端 */
    sbit    autoKey =P3 ^ 0;	    /***自动切换量程***/
    
    /***********LCD显示数组**************************/
    uchar code	table0[]	= "  DCV(1-5V)       ";
    uchar		table1[]	= "  V=0000.00 v";
    uchar code	table2[]	= "  DCI(20-100mA)   ";
    uchar		table3[]	= "  I=0000.00mA";
    uchar code	table4[]	= "  R(100-1k)       ";
    uchar		table5[]	= "  R=000.0    ";
    
    uchar code	table6[]	= "  DCV(0-1000mV)   ";
    uchar		table7[]	= "  V=0000.00mv          ";
    uchar code	table8[]	= "  DCI(0-20mA)     ";
    uchar		table9[]	= "  I=0000.00mA";
    uchar code	table10[]	= "  R(0-500)       ";
    uchar		table11[]	= "  R=000.0R        ";


    uchar code	table12[]	= "  DCV(0-5V)       ";
    uchar code	table13[]	= "  DCI(0-100mA)   ";
    uchar code	table14[]	= "  R(0-1k)       ";

项目获取:

https://gitee.com/feifei1122/simulation-project