更多ceph-csi其他源码分析，请查看下面这篇博文：kubernetes ceph-csi分析目录导航
ceph-csi源码分析（4）-rbd driver-controllerserver分析
当ceph-csi组件启动时指定的driver type为rbd时，会启动rbd driver相关的服务。然后再根据controllerserver、nodeserver的参数配置，决定启动ControllerServer与IdentityServer，或NodeServer与IdentityServer。
基于tag v3.0.0
https://github.com/ceph/ceph-csi/releases/tag/v3.0.0
rbd driver分析将分为4个部分，分别是服务入口分析、controllerserver分析、nodeserver分析与IdentityServer分析。
这节进行controllerserver分析，controllerserver主要包括了CreateVolume（创建存储）、DeleteVolume（删除存储）、ControllerExpandVolume（存储扩容）、CreateSnapshot（创建存储快照）、DeleteSnapshot（删除存储快照）操作，这里主要对CreateVolume（创建存储）、DeleteVolume（删除存储）、ControllerExpandVolume（存储扩容）进行分析。
controllerserver分析
（1）CreateVolume
简介
调用ceph存储后端，创建存储（rbd image）。
CreateVolume creates the volume in backend.
大致步骤：
（1）检查该driver是否支持存储的创建，不支持则直接返回错误；
（2）构建ceph请求凭证，生成volume ID；
（3）调用ceph存储后端，创建存储。
三种创建来源：
（1）从已有image拷贝；
（2）根据快照创建image；
（3）直接创建新的image。
CreateVolume
主体流程：
（1）检查该driver是否支持存储的创建，不支持则直接返回错误；
（2）根据secret构建ceph请求凭证（secret由external-provisioner组件传入）；
（3）处理请求参数，并转换为rbdVol结构体（根据请求参数clusterID，从本地ceph配置文件中读取该clusterID对应的monitor信息，将clusterID与monitor赋值给rbdVol结构体；检查请求参数imageFeatures，只支持Layering；根据请求参数VolumeCapabilities决定在存储挂载时是否启动in-use检查，即多节点挂载检查；存储大小只支持整数，对小数做进一处理）；
（4）检查并获取锁（同名存储在同一时间，只能做创建、删除、扩容操作中的一个，通过该锁来保证互斥）；
（5）创建与Ceph集群的连接；
（6）生成RbdImageName与ReservedID，并生成volume ID；
（7）调用createBackingImage去创建image；
（8）释放锁。
（暂时跳过从已有image拷贝与根据快照创建image的分析）
//ceph-csi/internal/rbd/controllerserver.go
func (cs *ControllerServer) CreateVolume(ctx context.Context, req *csi.CreateVolumeRequest) (*csi.CreateVolumeResponse, error) {
// （1）校验请求参数；
if err := cs.validateVolumeReq(ctx, req); err != nil {
return nil, err
}
// （2）根据secret构建ceph请求凭证；
cr, err := util.NewUserCredentials(req.GetSecrets())
if err != nil {
return nil, status.Error(codes.Internal, err.Error())
}
defer cr.DeleteCredentials()
// （3）将请求参数转换为rbdVol结构体；
rbdVol, err := cs.parseVolCreateRequest(ctx, req)
if err != nil {
return nil, err
}
defer rbdVol.Destroy()
// Existence and conflict checks
if acquired := cs.VolumeLocks.TryAcquire(req.GetName()); !acquired {
klog.Errorf(util.Log(ctx, util.VolumeOperationAlreadyExistsFmt), req.GetName())
return nil, status.Errorf(codes.Aborted, util.VolumeOperationAlreadyExistsFmt, req.GetName())
}
defer cs.VolumeLocks.Release(req.GetName())
// （4）创建与Ceph集群的连接；
err = rbdVol.Connect(cr)
if err != nil {
klog.Errorf(util.Log(ctx, "failed to connect to volume %v: %v"), rbdVol.RbdImageName, err)
return nil, status.Error(codes.Internal, err.Error())
}
parentVol, rbdSnap, err := checkContentSource(ctx, req, cr)
if err != nil {
return nil, err
}
found, err := rbdVol.Exists(ctx, parentVol)
if err != nil {
return nil, getGRPCErrorForCreateVolume(err)
}
if found {
if rbdSnap != nil {
// check if image depth is reached limit and requires flatten
err = checkFlatten(ctx, rbdVol, cr)
if err != nil {
return nil, err
}
}
return buildCreateVolumeResponse(ctx, req, rbdVol)
}
err = validateRequestedVolumeSize(rbdVol, parentVol, rbdSnap, cr)
if err != nil {
return nil, err
}
err = flattenParentImage(ctx, parentVol, cr)
if err != nil {
return nil, err
}
// （5）生成rbd image name并生成volume ID；
err = reserveVol(ctx, rbdVol, rbdSnap, cr)
if err != nil {
return nil, status.Error(codes.Internal, err.Error())
}
defer func() {
if err != nil {
if !errors.Is(err, ErrFlattenInProgress) {
errDefer := undoVolReservation(ctx, rbdVol, cr)
if errDefer != nil {
klog.Warningf(util.Log(ctx, "failed undoing reservation of volume: %s (%s)"), req.GetName(), errDefer)
}
}
}
}()
// （6）调用createBackingImage去创建image。
err = cs.createBackingImage(ctx, cr, rbdVol, parentVol, rbdSnap)
if err != nil {
if errors.Is(err, ErrFlattenInProgress) {
return nil, status.Error(codes.Aborted, err.Error())
}
return nil, err
}
volumeContext := req.GetParameters()
volumeContext["pool"] = rbdVol.Pool
volumeContext["journalPool"] = rbdVol.JournalPool
volumeContext["imageName"] = rbdVol.RbdImageName
volume := &csi.Volume{
VolumeId: rbdVol.VolID,
CapacityBytes: rbdVol.VolSize,
VolumeContext: volumeContext,
ContentSource: req.GetVolumeContentSource(),
}
if rbdVol.Topology != nil {
volume.AccessibleTopology =
[]*csi.Topology{
{
Segments: rbdVol.Topology,
},
}
}
return &csi.CreateVolumeResponse{Volume: volume}, nil
}
1 reserveVol
用于生成RbdImageName与ReservedID，并生成volume ID。调用j.ReserveName获取imageName，调用util.GenerateVolID生成volume ID。
//ceph-csi/internal/rbd/rbd_journal.go
// reserveVol is a helper routine to request a rbdVolume name reservation and generate the
// volume ID for the generated name.
func reserveVol(ctx context.Context, rbdVol *rbdVolume, rbdSnap *rbdSnapshot, cr *util.Credentials) error {
var (
err error
)
err = updateTopologyConstraints(rbdVol, rbdSnap)
if err != nil {
return err
}
journalPoolID, imagePoolID, err := util.GetPoolIDs(ctx, rbdVol.Monitors, rbdVol.JournalPool, rbdVol.Pool, cr)
if err != nil {
return err
}
kmsID := ""
if rbdVol.Encrypted {
kmsID = rbdVol.KMS.GetID()
}
j, err := volJournal.Connect(rbdVol.Monitors, cr)
if err != nil {
return err
}
defer j.Destroy()
// 生成rbd image name
rbdVol.ReservedID, rbdVol.RbdImageName, err = j.ReserveName(
ctx, rbdVol.JournalPool, journalPoolID, rbdVol.Pool, imagePoolID,
rbdVol.RequestName, rbdVol.NamePrefix, "", kmsID)
if err != nil {
return err
}
// 生成volume ID
rbdVol.VolID, err = util.GenerateVolID(ctx, rbdVol.Monitors, cr, imagePoolID, rbdVol.Pool,
rbdVol.ClusterID, rbdVol.ReservedID, volIDVersion)
if err != nil {
return err
}
util.DebugLog(ctx, "generated Volume ID (%s) and image name (%s) for request name (%s)",
rbdVol.VolID, rbdVol.RbdImageName, rbdVol.RequestName)
return nil
}
1.1 GenerateVolID
调用vi.ComposeCSIID()来生成volume ID。
//ceph-csi/internal/util/util.go
func GenerateVolID(ctx context.Context, monitors string, cr *Credentials, locationID int64, pool, clusterID, objUUID string, volIDVersion uint16) (string, error) {
var err error
if locationID == InvalidPoolID {
locationID, err = GetPoolID(monitors, cr, pool)
if err != nil {
return "", err
}
}
// generate the volume ID to return to the CO system
vi := CSIIdentifier{
LocationID: locationID,
EncodingVersion: volIDVersion,
ClusterID: clusterID,
ObjectUUID: objUUID,
}
volID, err := vi.ComposeCSIID()
return volID, err
}
vi.ComposeCSIID()为生成volume ID的方法，volume ID由csi_id_version+ length of clusterID+ clusterID+ poolID+ ObjectUUID组成，共64bytes。
//ceph-csi/internal/util/volid.go
/*
ComposeCSIID composes a CSI ID from passed in parameters.
Version 1 of the encoding scheme is as follows,
[csi_id_version=1:4byte] + [-:1byte]
[length of clusterID=1:4byte] + [-:1byte]
[clusterID:36bytes (MAX)] + [-:1byte]
[poolID:16bytes] + [-:1byte]
[ObjectUUID:36bytes]
Total of constant field lengths, including '-' field separators would hence be,
4+1+4+1+1+16+1+36 = 64
*/
func (ci CSIIdentifier) ComposeCSIID() (string, error) {
buf16 := make([]byte, 2)
buf64 := make([]byte, 8)
if (knownFieldSize + len(ci.ClusterID)) > maxVolIDLen {
return "", errors.New("CSI ID encoding length overflow")
}
if len(ci.ObjectUUID) != uuidSize {
return "", errors.New("CSI ID invalid object uuid")
}
binary.BigEndian.PutUint16(buf16, ci.EncodingVersion)
versionEncodedHex := hex.EncodeToString(buf16)
binary.BigEndian.PutUint16(buf16, uint16(len(ci.ClusterID)))
clusterIDLength := hex.EncodeToString(buf16)
binary.BigEndian.PutUint64(buf64, uint64(ci.LocationID))
poolIDEncodedHex := hex.EncodeToString(buf64)
return strings.Join([]string{versionEncodedHex, clusterIDLength, ci.ClusterID,
poolIDEncodedHex, ci.ObjectUUID}, "-"), nil
}
2 createBackingImage
主要流程：
（1）调用createImage创建image；
（2）调用j.StoreImageID存储image ID等信息进omap。
//ceph-csi/internal/rbd/controllerserver.go
func (cs *ControllerServer) createBackingImage(ctx context.Context, cr *util.Credentials, rbdVol, parentVol *rbdVolume, rbdSnap *rbdSnapshot) error {
var err error
var j = &journal.Connection{}
j, err = volJournal.Connect(rbdVol.Monitors, cr)
if err != nil {
return status.Error(codes.Internal, err.Error())
}
defer j.Destroy()
// nolint:gocritic // this ifElseChain can not be rewritten to a switch statement
if rbdSnap != nil {
if err = cs.OperationLocks.GetRestoreLock(rbdSnap.SnapID); err != nil {
klog.Error(util.Log(ctx, err.Error()))
return status.Error(codes.Aborted, err.Error())
}
defer cs.OperationLocks.ReleaseRestoreLock(rbdSnap.SnapID)
err = cs.createVolumeFromSnapshot(ctx, cr, rbdVol, rbdSnap.SnapID)
if err != nil {
return err
}
util.DebugLog(ctx, "created volume %s from snapshot %s", rbdVol.RequestName, rbdSnap.RbdSnapName)
} else if parentVol != nil {
if err = cs.OperationLocks.GetCloneLock(parentVol.VolID); err != nil {
klog.Error(util.Log(ctx, err.Error()))
return status.Error(codes.Aborted, err.Error())
}
defer cs.OperationLocks.ReleaseCloneLock(parentVol.VolID)
return rbdVol.createCloneFromImage(ctx, parentVol)
} else {
err = createImage(ctx, rbdVol, cr)
if err != nil {
klog.Errorf(util.Log(ctx, "failed to create volume: %v"), err)
return status.Error(codes.Internal, err.Error())
}
}
util.DebugLog(ctx, "created volume %s backed by image %s", rbdVol.RequestName, rbdVol.RbdImageName)
defer func() {
if err != nil {
if !errors.Is(err, ErrFlattenInProgress) {
if deleteErr := deleteImage(ctx, rbdVol, cr); deleteErr != nil {
klog.Errorf(util.Log(ctx, "failed to delete rbd image: %s with error: %v"), rbdVol, deleteErr)
}
}
}
}()
err = rbdVol.getImageID()
if err != nil {
klog.Errorf(util.Log(ctx, "failed to get volume id %s: %v"), rbdVol, err)
return status.Error(codes.Internal, err.Error())
}
err = j.StoreImageID(ctx, rbdVol.JournalPool, rbdVol.ReservedID, rbdVol.ImageID, cr)
if err != nil {
klog.Errorf(util.Log(ctx, "failed to reserve volume %s: %v"), rbdVol, err)
return status.Error(codes.Internal, err.Error())
}
if rbdSnap != nil {
err = rbdVol.flattenRbdImage(ctx, cr, false, rbdHardMaxCloneDepth, rbdSoftMaxCloneDepth)
if err != nil {
klog.Errorf(util.Log(ctx, "failed to flatten image %s: %v"), rbdVol, err)
return err
}
}
if rbdVol.Encrypted {
err = rbdVol.ensureEncryptionMetadataSet(rbdImageRequiresEncryption)
if err != nil {
klog.Errorf(util.Log(ctx, "failed to save encryption status, deleting image %s: %s"),
rbdVol, err)
return status.Error(codes.Internal, err.Error())
}
}
return nil
}
2.1 StoreImageID
调用setOMapKeys将ImageID与ReservedID存入omap中。
//ceph-csi/internal/journal/voljournal.go
// StoreImageID stores the image ID in omap.
func (conn *Connection) StoreImageID(ctx context.Context, pool, reservedUUID, imageID string, cr *util.Credentials) error {
err := setOMapKeys(ctx, conn, pool, conn.config.namespace, conn.config.cephUUIDDirectoryPrefix+reservedUUID,
map[string]string{conn.config.csiImageIDKey: imageID})
if err != nil {
return err
}
return nil
}
//ceph-csi/internal/journal/omap.go
func setOMapKeys(
ctx context.Context,
conn *Connection,
poolName, namespace, oid string, pairs map[string]string) error {
// fetch and configure the rados ioctx
ioctx, err := conn.conn.GetIoctx(poolName)
if err != nil {
return omapPoolError(err)
}
defer ioctx.Destroy()
if namespace != "" {
ioctx.SetNamespace(namespace)
}
bpairs := make(map[string][]byte, len(pairs))
for k, v := range pairs {
bpairs[k] = []byte(v)
}
err = ioctx.SetOmap(oid, bpairs)
if err != nil {
klog.Errorf(
util.Log(ctx, "failed setting omap keys (pool=%q, namespace=%q, name=%q, pairs=%+v): %v"),
poolName, namespace, oid, pairs, err)
return err
}
util.DebugLog(ctx, "set omap keys (pool=%q, namespace=%q, name=%q): %+v)",
poolName, namespace, oid, pairs)
return nil
}
（2）DeleteVolume
简介
调用ceph存储后端，删除存储（rbd image）。
DeleteVolume deletes the volume in backend and removes the volume metadata from store
大致步骤：
（1）检查该driver是否支持存储的删除，不支持则直接返回错误；
（2）判断image是否还在使用（是否有watchers）；
（3）没被使用则调用ceph存储后端删除该image。
DeleteVolume
主体流程：
（1）检查该driver是否支持存储的删除，不支持则直接返回错误；
（2）根据secret构建ceph请求凭证（secret由external-provisioner组件传入）；
（3）从请求参数获取volumeID；
（4）将请求参数转换为rbdVol结构体；
（5）判断rbd image是否还在被使用，被使用则返回错误；
（6）删除temporary rbd image（clone操作的临时image）；
（7）删除rbd image。
//ceph-csi/internal/rbd/controllerserver.go
func (cs *ControllerServer) DeleteVolume(ctx context.Context, req *csi.DeleteVolumeRequest) (*csi.DeleteVolumeResponse, error) {
// （1）校验请求参数；
if err := cs.Driver.ValidateControllerServiceRequest(csi.ControllerServiceCapability_RPC_CREATE_DELETE_VOLUME); err != nil {
klog.Errorf(util.Log(ctx, "invalid delete volume req: %v"), protosanitizer.StripSecrets(req))
return nil, err
}
// （2）根据secret构建ceph请求凭证；
cr, err := util.NewUserCredentials(req.GetSecrets())
if err != nil {
return nil, status.Error(codes.Internal, err.Error())
}
defer cr.DeleteCredentials()
// （3）从请求参数获取volumeID；
// For now the image get unconditionally deleted, but here retention policy can be checked
volumeID := req.GetVolumeId()
if volumeID == "" {
return nil, status.Error(codes.InvalidArgument, "empty volume ID in request")
}
if acquired := cs.VolumeLocks.TryAcquire(volumeID); !acquired {
klog.Errorf(util.Log(ctx, util.VolumeOperationAlreadyExistsFmt), volumeID)
return nil, status.Errorf(codes.Aborted, util.VolumeOperationAlreadyExistsFmt, volumeID)
}
defer cs.VolumeLocks.Release(volumeID)
// lock out volumeID for clone and expand operation
if err = cs.OperationLocks.GetDeleteLock(volumeID); err != nil {
klog.Error(util.Log(ctx, err.Error()))
return nil, status.Error(codes.Aborted, err.Error())
}
defer cs.OperationLocks.ReleaseDeleteLock(volumeID)
rbdVol := &rbdVolume{}
defer rbdVol.Destroy()
// （4）将请求参数转换为rbdVol结构体；
rbdVol, err = genVolFromVolID(ctx, volumeID, cr, req.GetSecrets())
if err != nil {
if errors.Is(err, util.ErrPoolNotFound) {
klog.Warningf(util.Log(ctx, "failed to get backend volume for %s: %v"), volumeID, err)
return &csi.DeleteVolumeResponse{}, nil
}
// if error is ErrKeyNotFound, then a previous attempt at deletion was complete
// or partially complete (image and imageOMap are garbage collected already), hence return
// success as deletion is complete
if errors.Is(err, util.ErrKeyNotFound) {
klog.Warningf(util.Log(ctx, "Failed to volume options for %s: %v"), volumeID, err)
return &csi.DeleteVolumeResponse{}, nil
}
// All errors other than ErrImageNotFound should return an error back to the caller
if !errors.Is(err, ErrImageNotFound) {
return nil, status.Error(codes.Internal, err.Error())
}
// If error is ErrImageNotFound then we failed to find the image, but found the imageOMap
// to lead us to the image, hence the imageOMap needs to be garbage collected, by calling
// unreserve for the same
if acquired := cs.VolumeLocks.TryAcquire(rbdVol.RequestName); !acquired {
klog.Errorf(util.Log(ctx, util.VolumeOperationAlreadyExistsFmt), rbdVol.RequestName)
return nil, status.Errorf(codes.Aborted, util.VolumeOperationAlreadyExistsFmt, rbdVol.RequestName)
}
defer cs.VolumeLocks.Release(rbdVol.RequestName)
if err = undoVolReservation(ctx, rbdVol, cr); err != nil {
return nil, status.Error(codes.Internal, err.Error())
}
return &csi.DeleteVolumeResponse{}, nil
}
defer rbdVol.Destroy()
// lock out parallel create requests against the same volume name as we
// cleanup the image and associated omaps for the same
if acquired := cs.VolumeLocks.TryAcquire(rbdVol.RequestName); !acquired {
klog.Errorf(util.Log(ctx, util.VolumeOperationAlreadyExistsFmt), rbdVol.RequestName)
return nil, status.Errorf(codes.Aborted, util.VolumeOperationAlreadyExistsFmt, rbdVol.RequestName)
}
defer cs.VolumeLocks.Release(rbdVol.RequestName)
// （5）判断rbd image是否还在被使用，被使用则返回错误；
inUse, err := rbdVol.isInUse()
if err != nil {
klog.Errorf(util.Log(ctx, "failed getting information for image (%s): (%s)"), rbdVol, err)
return nil, status.Error(codes.Internal, err.Error())
}
if inUse {
klog.Errorf(util.Log(ctx, "rbd %s is still being used"), rbdVol)
return nil, status.Errorf(codes.Internal, "rbd %s is still being used", rbdVol.RbdImageName)
}
// （6）删除temporary rbd image；
// delete the temporary rbd image created as part of volume clone during
// create volume
tempClone := rbdVol.generateTempClone()
err = deleteImage(ctx, tempClone, cr)
if err != nil {
// return error if it is not ErrImageNotFound
if !errors.Is(err, ErrImageNotFound) {
klog.Errorf(util.Log(ctx, "failed to delete rbd image: %s with error: %v"),
tempClone, err)
return nil, status.Error(codes.Internal, err.Error())
}
}
// （7）删除rbd image.
// Deleting rbd image
util.DebugLog(ctx, "deleting image %s", rbdVol.RbdImageName)
if err = deleteImage(ctx, rbdVol, cr); err != nil {
klog.Errorf(util.Log(ctx, "failed to delete rbd image: %s with error: %v"),
rbdVol, err)
return nil, status.Error(codes.Internal, err.Error())
}
if err = undoVolReservation(ctx, rbdVol, cr); err != nil {
klog.Errorf(util.Log(ctx, "failed to remove reservation for volume (%s) with backing image (%s) (%s)"),
rbdVol.RequestName, rbdVol.RbdImageName, err)
return nil, status.Error(codes.Internal, err.Error())
}
if rbdVol.Encrypted {
if err = rbdVol.KMS.DeletePassphrase(rbdVol.VolID); err != nil {
klog.Warningf(util.Log(ctx, "failed to clean the passphrase for volume %s: %s"), rbdVol.VolID, err)
}
}
return &csi.DeleteVolumeResponse{}, nil
}
isInUse
通过列出image的watcher来判断该image是否在被使用。当image没有watcher时，isInUse返回false，否则返回true。
//ceph-csi/internal/rbd/rbd_util.go
func (rv *rbdVolume) isInUse() (bool, error) {
image, err := rv.open()
if err != nil {
if errors.Is(err, ErrImageNotFound) || errors.Is(err, util.ErrPoolNotFound) {
return false, err
}
// any error should assume something else is using the image
return true, err
}
defer image.Close()
watchers, err := image.ListWatchers()
if err != nil {
return false, err
}
// because we opened the image, there is at least one watcher
return len(watchers) != 1, nil
}
（3）ControllerExpandVolume
简介
调用ceph存储后端，扩容存储（rbd image）。
ControllerExpandVolume expand RBD Volumes on demand based on resizer request.
大致步骤：
（1）检查该driver是否支持存储扩容，不支持则直接返回错误；
（2）调用ceph存储后端扩容该image。
实际上，存储扩容分为两大步骤，第一步是external-provisioner组件调用rbdType-ControllerServer类型的ceph-csi进行ControllerExpandVolume，主要负责将底层存储扩容；第二步是kubelet调用rbdType-NodeServer类型的ceph-csi进行NodeExpandVolume，主要负责将底层rbd image的扩容信息同步到rbd/nbd device，对xfs/ext文件系统进行扩展（当volumemode是block，则不用进行node端扩容操作）。
ControllerExpandVolume
主体流程：
（1）检查该driver是否支持存储扩容，不支持则直接返回错误；
（2）根据secret构建ceph请求凭证（secret由external-provisioner组件传入）；
（3）将请求参数转换为rbdVol结构体；
（4）调用rbdVol.resize去扩容image。
func (cs *ControllerServer) ControllerExpandVolume(ctx context.Context, req *csi.ControllerExpandVolumeRequest) (*csi.ControllerExpandVolumeResponse, error) {
if err := cs.Driver.ValidateControllerServiceRequest(csi.ControllerServiceCapability_RPC_EXPAND_VOLUME); err != nil {
klog.Errorf(util.Log(ctx, "invalid expand volume req: %v"), protosanitizer.StripSecrets(req))
return nil, err
}
volID := req.GetVolumeId()
if volID == "" {
return nil, status.Error(codes.InvalidArgument, "volume ID cannot be empty")
}
capRange := req.GetCapacityRange()
if capRange == nil {
return nil, status.Error(codes.InvalidArgument, "capacityRange cannot be empty")
}
// lock out parallel requests against the same volume ID
if acquired := cs.VolumeLocks.TryAcquire(volID); !acquired {
klog.Errorf(util.Log(ctx, util.VolumeOperationAlreadyExistsFmt), volID)
return nil, status.Errorf(codes.Aborted, util.VolumeOperationAlreadyExistsFmt, volID)
}
defer cs.VolumeLocks.Release(volID)
// lock out volumeID for clone and delete operation
if err := cs.OperationLocks.GetExpandLock(volID); err != nil {
klog.Error(util.Log(ctx, err.Error()))
return nil, status.Error(codes.Aborted, err.Error())
}
defer cs.OperationLocks.ReleaseExpandLock(volID)
cr, err := util.NewUserCredentials(req.GetSecrets())
if err != nil {
return nil, status.Error(codes.Internal, err.Error())
}
defer cr.DeleteCredentials()
rbdVol := &rbdVolume{}
defer rbdVol.Destroy()
rbdVol, err = genVolFromVolID(ctx, volID, cr, req.GetSecrets())
if err != nil {
// nolint:gocritic // this ifElseChain can not be rewritten to a switch statement
if errors.Is(err, ErrImageNotFound) {
err = status.Errorf(codes.NotFound, "volume ID %s not found", volID)
} else if errors.Is(err, util.ErrPoolNotFound) {
klog.Errorf(util.Log(ctx, "failed to get backend volume for %s: %v"), volID, err)
err = status.Errorf(codes.NotFound, err.Error())
} else {
err = status.Errorf(codes.Internal, err.Error())
}
return nil, err
}
defer rbdVol.Destroy()
if rbdVol.Encrypted {
return nil, status.Errorf(codes.InvalidArgument, "encrypted volumes do not support resize (%s)",
rbdVol)
}
// always round up the request size in bytes to the nearest MiB/GiB
volSize := util.RoundOffBytes(req.GetCapacityRange().GetRequiredBytes())
// resize volume if required
nodeExpansion := false
if rbdVol.VolSize < volSize {
util.DebugLog(ctx, "rbd volume %s size is %v,resizing to %v", rbdVol, rbdVol.VolSize, volSize)
rbdVol.VolSize = volSize
nodeExpansion = true
err = rbdVol.resize(ctx, cr)
if err != nil {
klog.Errorf(util.Log(ctx, "failed to resize rbd image: %s with error: %v"), rbdVol, err)
return nil, status.Error(codes.Internal, err.Error())
}
}
return &csi.ControllerExpandVolumeResponse{
CapacityBytes: rbdVol.VolSize,
NodeExpansionRequired: nodeExpansion,
}, nil
}
rbdVol.resize
拼接resize命令并执行。
func (rv *rbdVolume) resize(ctx context.Context, cr *util.Credentials) error {
mon := rv.Monitors
volSzMiB := fmt.Sprintf("%dM", util.RoundOffVolSize(rv.VolSize))
args := []string{"resize", rv.String(), "--size", volSzMiB, "--id", cr.ID, "-m", mon, "--keyfile=" + cr.KeyFile}
_, stderr, err := util.ExecCommand(ctx, "rbd", args...)
if err != nil {
return fmt.Errorf("failed to resize rbd image (%w), command output: %s", err, stderr)
}
return nil
}
至此，rbd driver-controllerserver的分析已经完成，下面做个总结。
rbd driver-controllerserver分析总结
（1）controllerserver主要包括了CreateVolume（创建存储）、DeleteVolume（删除存储）、ControllerExpandVolume（存储扩容）、CreateSnapshot（创建存储快照）、DeleteSnapshot（删除存储快照）操作，这里主要对CreateVolume（创建存储）、DeleteVolume（删除存储）、ControllerExpandVolume（存储扩容）进行分析，作用分别如下：
CreateVolume：调用ceph存储后端，创建存储（rbd image）。
DeleteVolume：调用ceph存储后端，删除存储（rbd image）。
ControllerExpandVolume：调用ceph存储后端，扩容存储（rbd image）。
（2）存储扩容分为两大步骤，第一步是external-provisioner组件调用rbdType-ControllerServer类型的ceph-csi进行ControllerExpandVolume，主要负责将底层存储扩容；第二步是kubelet调用rbdType-NodeServer类型的ceph-csi进行NodeExpandVolume，主要负责将底层rbd image的扩容信息同步到rbd/nbd device，对xfs/ext文件系统进行扩展（当volumemode是block，则不用进行node端扩容操作）。
1262
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
