Windows修改IP地址的脚本

由于最近经常在实验室和办公室来回跑，实验室的IP地址是固定的，每个端口的IP地址都是固定的；而办公室又必须采用DCHP，所以每次换来换去很麻烦。就写了下面两个脚本，用来更改IP地址。

首先是换成DHCP的脚本：

@echo off                                                    
                                                             
netsh interface ip set address name="Local Area Connection" source=dhcp
                                                             
netsh interface ip set dns name="Local Area Connection" source=dhcp   
                                                             
pause                

其次是固定IP地址的脚本：

@echo off                                                                                    
                                                                                             
netsh interface ip set address "Local Area Connection" static 135.251.193.87 255.255.255.128 135.251.193.1
netsh interface ip add address "Local Area Connection" 135.251.197.163 255.255.255.0 135.251.197.1
netsh interface ip add address "Local Area Connection" 192.168.1.100 255.255.255.0 192.168.1.1
                                                                                             
netsh interface ip set dnsservers "Local Area Connection" static 172.24.208.127 primary  
                                                                                                
pause                       

由于我经常用到三个IP地址，所以在固定IP定制的脚本里加了三个IP地址。