文章来源：http://www.ctkn.net/tag/epel-repo-centos-6/
Toenable EPEL (Extra Packages for Enterprise Linux) for CentOS 5 x86 or x64,login to SSH on your server and execute the following command (dependent onyourOS – unsure of whatversion of CentOS you are running?):
CentOS6.x32-bit (x86/i386):
rpm -Uvh http://download.fedoraproject.org/pub/epel/6/i386/epel-release-6-5.noarch.rpm
CentOS6.x 64-bit(x64):
rpm -Uvh http://download.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-5.noarch.rpm
CentOS5.x 32-bit(x86/i386):
rpm -Uvh http://dl.fedoraproject.org/pub/epel/5/i386/epel-release-5-4.noarch.rpm
CentOS5.x 64-bit(x64):
rpm -Uvh http://dl.fedoraproject.org/pub/epel/5/x86_64/epel-release-5-4.noarch.rpm
DisableEPELRepo:
Ifyou want to disable the EPEL repo on your server, set“enabled=0″ in“/etc/yum.repos.d/epel.repo”:
vim /etc/yum.repos.d/epel.repo
Installing RPMforge
RPMforge is a collaboration of Dag and other packagers. They provide over 5000 packages for CentOS, including wine, vlc, mplayer, xmms-mp3, and other popular media tools. It is not part of Red Hat or CentOS but is designed to work with those distributions. See also Using RPMforge and Repoforge.
Note: Because this repository is NOT part of CentOS, you should direct support questions to its maintainers at the Repoforge Users mailing list.
Packages are supplied in RPM format and in most cases are ready to use. The default RPMforge repository does not replace official CentOS base packages.
1. RPMforge for CentOS 6
The default RPMforge repository does not replace any CentOS base packages. In the past it used to, but those packages are now in a separate repository (rpmforge-extras) which is disabled by default.
You can find a complete listing of the RPMforge package packages at http://packages.sw.be/
Download the rpmforge-release package. Choose one of the two links below, selecting to match your host's architecture. If you are unsure of which one to use you can check your architecture with the commanduname -i
-
i686 http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.i686.rpm
-
x86_64 http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm
The preferred rpmforge-release package to retrieve and to install in order to enable that repository is one of the two listed above.
Install DAG's GPG key
rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt
If you get an error message like the following the key has already been imported:
error: http://apt.sw.be/RPM-GPG-KEY.dag.txt: key 1 import failed.
Verify the package you have downloaded
rpm -K rpmforge-release-0.5.2-2.el6.rf.*.rpm
Security warning: The rpmforge-release package imports GPG keys into your RPM database. As long as you have verified the md5sum of the key injection package, and trust Dag, et al., then it should be as safe as your trust of them extends.
Install the package
rpm -i rpmforge-release-0.5.2-2.el6.rf.*.rpm
This will add a yum repository config file and import the appropriate GPG keys.
Then try to install something like this
yum install htop
2. RPMforge for CentOS 5
The default RPMforge repository does not replace any CentOS base packages. In the past it used to, but those packages are now in a separate repository (rpmforge-extras) which is disabled by default.
You can find a complete listing of the RPMforge package packages at http://packages.sw.be/
Download the rpmforge-release package. Choose one of the two links below, selecting to match your host's architecture. If you are unsure of which one to use you can check your architecture with the commanduname -i
-
i386 http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el5.rf.i386.rpm
-
x86_64 http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el5.rf.x86_64.rpm
The preferred rpmforge-release package to retrieve and to install in order to enable that repository is one of the two listed above.
Install DAG's GPG key
rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt
Verify the package you have downloaded
rpm -K rpmforge-release-0.5.2-2.el5.rf.*.rpm
Security warning: The rpmforge-release package imports GPG keys into your RPM database. As long as you have verified the md5sum of the key injection package, and trust Dag, et al., then it should be as safe as your trust of them extends.
Install the package
rpm -i rpmforge-release-0.5.2-2.el5.rf.*.rpm
This will add a yum repository config file and import the appropriate GPG keys.
Then try to install something like this
yum install htop
3. RPMforge for CentOS 4
The default RPMforge repository does not replace any CentOS base packages. In the past it used to, but those packages are now in a separate repository (rpmforge-extras) which is disabled by default.
You can find a complete listing of the RPMforge packages at http://packages.sw.be/
Download the rpmforge-release package. Choose one of the two links below, selecting to match your host's architecture. If you are unsure of which one to use you can check your architecture with the commanduname -i
-
i386 http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el4.rf.i386.rpm
-
x86_64 http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el4.rf.x86_64.rpm
The preferred rpmforge-release package to retrieve and to install in order to enable that repository is one of the two listed above.
Install DAG's GPG key
rpm --import http://dag.wieers.com/rpm/packages/RPM-GPG-KEY.dag.txt
Verify the package you have downloaded
rpm -K rpmforge-release-0.5.2-2.el4.rf.*.rpm
Security warning: The rpmforge-release package imports GPG keys into your RPM database. As long as you have verified the md5sum of the key injection package, and trust Dag, et al., then it should be as safe as your trust of them extends.
Install the package
rpm -i rpmforge-release-0.5.2-2.el4.rf.*.rpm
This will add a yum repository config file and import the appropriate GPG keys.
Then try to install something like this
yum install htop
8244
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
