C/C++中常见错误

1."c" not an argument in function sum 该标识符不是函数的参数  
2.array bounds missing ] in function main 缺少数组界限符 "]"  
3.Array size too large in function main 数组规模太大  
4.bad file name format in include directive 在包含指令中的文件名格式不正确.
5.Call of non-function in function main 调用未经过定义的函数.
6.cannot modify a const object in function main 对常量不能进行修改.
7.character constant too long in function main 字符常量太大. 
8.constant expression required in funtion main 数组定义的时候,数组大小要求是常数  
9.compound statment missing } in function main 复合语句漏掉符号 "{"
10.declaration syntax error in function main 宣告语法错误
11.expression syntax in function main 表达式语法错误 
12. extra parameter in call to sum in function 调用函数时使用了过多的参数
13.illegal use of floating point in function main 浮点数的不合法使用 
14.illegal pionter subtraction in function main 不合法的指针相减  
15.invalid pointer addition in function main 无效的指针相加  
16.out of memory in function main 内存不足  
17.statement missing ; in function main 语句后面漏掉分号.  
警告报错  
18."k" is assigned a value which is never used 定义了一个变量,但程序从来没用过  
19.possibiy incorrect assignment in function main 这样的赋值可能不正确  
20.suspicious pointer conversion in function main 可疑的指针转换  
22.code has no effect in funtion main 代码对程序没效果  
23.Ambiguous operators need parentheses:不明确的运算需要用括号括起  
24.Ambiguous symbol 'xxx' :不明确的符号  
25.Argument list syntax error:参数表语法错误  
26.Array bounds missing :丢失数组界限符  
27.Array size toolarge :数组尺寸太大  
28.Bad character in paramenters :参数中有不适当的字符  
29.Bad file name format in include directive :包含命令中文件名格式不正确  
30.Bad ifdef directive synatax :编译预处理ifdef有语法错  
31.Bad undef directive syntax :编译预处理undef有语法错  
32.Bit field too large :位字段太长  
33.Call of non-function :调用未定义的函数  
34.Call to function with no prototype :调用函数时没有函数的说明  
35.Cannot modify a const object :不允许修改常量对象  
36.Case outside of switch :漏掉了case 语句  
37.Case syntax error :Case 语法错误  
38.Code has no effect :代码不可述不可能执行到  
39.Compound statement missing{ :分程序漏掉"{"  
40.Conflicting type modifiers :不明确的类型说明符  
41.Constant expression required :要求常量表达式 
42.Constant out of range in comparison :在比较中常量超出范围  
43.Conversion may lose significant digits :转换时会丢失意义的数字  
44.Conversion of near pointer not allowed :不允许转换近指针  
45.Could not find file 'xxx' :找不到XXX文件  
46.Declaration missing ; :说明缺少"；"  
47.Declaration syntax error :说明中出现语法错误  

48.Default outside of switch efault 出现在switch语句之外  
49.Define directive needs an identifier :定义编译预处理需要标识符  
50.Division by zero :用零作除数  
51.Do statement must have while o-while语句中缺少while部分  
52.Enum syntax error :枚举类型语法错误  
53.Enumeration constant syntax error :枚举常数语法错误  
54.Error directive :xxx :错误的编译预处理命令  
55.Error writing output file :写输出文件错误  
56.Expression syntax error :表达式语法错误  
57.Extra parameter in call :调用时出现多余错误  
58.File name too long :文件名太长  
59.Function call missing ) :函数调用缺少右括号  
60.Fuction definition out of place :函数定义位置错误  
61.Fuction should return a value :函数必需返回一个值  
62.Goto statement missing label :Goto语句没有标号  
63.Hexadecimal or octal constant too large :16进制或8进制常数太大  
64.Illegal character 'x' :非法字符x  
65.Illegal initialization :非法的初始化  
66.Illegal octal digit :非法的8进制数字  
67.Illegal pointer subtraction :非法的指针相减  
68.Illegal structure operation :非法的结构体操作  
69.Illegal use of floating point :非法的浮点运算  
70.Illegal use of pointer :指针使用非法  
71.Improper use of a typedefsymbol :类型定义符号使用不恰当  
72.In-line assembly not allowed :不允许使用行间汇编  
73.Incompatible storage class :存储类别不相容  
74.Incompatible type conversion :不相容的类型转换  
75.Incorrect number format :错误的数据格式  
76.Incorrect use of default efault使用不当  
77.Invalid indirection 无效的间接运算  
78.Invalid pointer addition 指针相加无效  
79.Irreducible expression tree 无法执行的表达式运算  
80.Lvalue required 需要逻辑值0或非0值  
81.Macro argument syntax error 宏参数语法错误  
82.Macro expansion too long 宏的扩展以后太长  
83.Mismatched number of parameters in definition 定义中参数个数不匹配  
84.Misplaced break 此处不应出现break语句  
85.Misplaced continue 此处不应出现continue语句  
86.Misplaced decimal point 此处不应出现小数点  
87.Misplaced elif directive 不应编译预处理elif  
88.Misplaced else 此处不应出现else  
89.Misplaced else directive 此处不应出现编译预处理else  
90.Misplaced endif directive 此处不应出现编译预处理endif  
91.Must be addressable 必须是可以编址的  
92.Must take address of memory location 必须存储定位的地址  
93.No declaration for function 'xxx' 没有函数xxx的说明  
94.No stack 缺少堆栈  
95.No type information 没有类型信息  
96.Non-portable pointer assignment 不可移动的指针（地址常数）赋值  
97.Non-portable pointer comparison 不可移动的指针（地址常数）比较  
98.Non-portable pointer conversion 不可移动的指针（地址常数）转换  
99.Not a valid expression format type 不合法的表达式格式  
100.Not an allowed type 不允许使用的类型  
101.Numeric constant too large 数值常太大  
102.Out of memory 内存不够用  
103.Parameter 'xxx' is never used 能数xxx没有用到  
104.Pointer required on left side of -> 符号->的左边必须是指针  
105.Possible use of 'xxx' before definition 在定义之前就使用了xxx（警告）  
106.Possibly incorrect assignment 赋值可能不正确  
107.Redeclaration of 'xxx' 重复定义了xxx  
108.Redefinition of 'xxx' is not identical xx的两次定义不一致  
109.Register allocation failure 寄存器定址失败  
110.Repeat count needs an lvalue 重复计数需要逻辑值  
111.Size of structure or array not known 结构体或数给大小不确定  
112.Statement missing ; 语句后缺少"；"  
113.Structure or union syntax error X构体或联合体语法错误  
114.Structure size too large 结构体尺寸太大  
115.Sub scripting missing ] 下标缺少右方括号  
116.Superfluous & with function or array 函数或数组中有多余的"&"  
117.Suspicious pointer conversion 可疑的指针转换  
118.Symbol limit exceeded 符号超限  
119.Too few parameters in call 函数调用时的实参少于函数的参数不  
120.Too many default cases Default太多(switch语句中一个)  
121.Too many error or warning messages 错误或警告信息太多  
122.Too many type in declaration 说明中类型太多  
123.Too much auto memory in function 函数用到的局部存储太多  
124.Too much global data defined in file 文件中全局数据太多  
125.Two consecutive dots 两个连续的句点  
126.Type mismatch in parameter xxx 数xxx类型不匹配  
127.Type mismatch in redeclaration of 'xxx' xx重定义的类型不匹配  
128.Unable to create output file 'xxx' 无法建立输出文件xxx  
129.Unable to open include file 'xxx' 无法打开被包含的文件xxx  
130.Unable to open input file 'xxx' 无法打开输入文件xxx  
131.Undefined label 'xxx' 没有定义的标号xxx  
132.Undefined structure 'xxx' 没有定义的结构xxx  
133.Undefined symbol 'xxx' 没有定义的符号xxx  
134.Unexpected end of file in comment started on line xxx 从xxx行开始的注解尚未结束文件不能结束  
135.Unexpected end of file in conditional started on line xxx 从xxx 开始的条件语句尚未结束文件不能结束  
136.Unknown assemble instruction 未知的汇编结构  
137.Unknown option 未知的操作  
138.Unknown preprocessor directive: 'xxx' 不认识的预处理命令xxx  
139.Unreachable code 无路可达的代码  
140.Unterminated string or character constant 字符串缺少引号  
141.User break 用户强行中断了程序  
142.Void functions may not return a value Void类型的函数不应有返回值  
143.Wrong number of arguments 调用函数的参数数目错  
144.'xxx' not an argument xxx不是参数  
145.'xxx' not part of structure xxx不是结构体的一部分  
146.'xxx' statement missing ( xx语句缺少左括号  
147.'xxx' statement missing ) xxx语句缺少右括号  
148.'xxx' statement missing ; xxx缺少分号  
149.'xxx' declared but never used 说明了xxx但没有使用  
150.'xxx' is assigned a value which is never used 给xxx赋了值但未用过  
151.Zero length structure 结构体的长度为零

 

 

原文来自：http://www.cppleyuan.com/viewthread.php?tid=700&extra=page%3D1