Cisco 1200 AP中 AP所扮演的角色

以下是原文翻譯--若有改進之處  懇請四方先進給與指教http://life.iiietc.ncu.edu.tw/xms/content/show.php?id=10181

Role in Radio Network

Select the role in the radio network for each device. Depending on which device you are using, the roles can vary. You can also configure a fallback role for root access points. The wireless device automatically assumes the fallback role when its Ethernet port is disabled or disconnected from the wired LAN. Choose one of the three access point (root) settings if the access point is connected to the wired LAN.

• Access Point (AP 1100, 1130, 1200, 1240, 1310)無線存取點模式
  This default setting enables wireless clients to continue to associate even when there is no connection to the wired LAN.

即使當失去了與有線網路連線時此預設會啟動無線通訊的clients 保持持續連線

• Access Point (Fallback to Radio Shutdown)通訊設備關閉模式
  When the wired connection is lost, the radio shuts down. This fallback forces the clients to associate to another access point if one is available.

   當失去與有線網路連線時  無線通訊會停止運作  將迫使clients自動連結到其他可用的AP

 

 

• Access Point (Fallback to Repeater)中繼模式
  When the wired connection is lost, the radio becomes a repeater. The repeater parent should be configured to allow data to be wirelessly transferred to another access point.

當失去與有線網路連線時，無線通訊(無線廣播)會自動轉換成中繼器(中繼站)。中繼器的來源必須被設定為允許資料透過無線方式轉換(傳送)到其他AP

Repeater (AP1100, 1130, 1200, 1240, 1310) 中繼模式

Choose this setting if the access point is not connected to the wired LAN. Client data is transferred to the access pointselected as the repeater parent. The repeater parent may be configured as an access point or another repeater.

假設AP沒有連結到有線網路時選擇此設定   Client 的data 被轉換到被選為中繼站來源之AP，(此中繼來源可被設定為無線存取點或中繼器)

• Root Bridge with Wireless Client (AP1200, 1240, 1310) 具單一無線Client端之根橋模式
  Specifies that the root bridge mode accepts associations from client devices. A root bridge can be an access point or a bridge. Wireless clients, non-root bridges, repeaters, and workgroup bridges can associate with a root bridge.

      詳細說明:接受來自Client 設備連結的根橋模式，   根橋可以扮演一個無線存取點或一個橋接器。無線client端，非根橋模式，中繼模式，和工作群組橋接器可以與根橋連繫)

• Non-Root Bridge with Wireless Clients (AP1200, 1240, 1310) 具無線Clients端之非根橋模式
  Specifies that the non-root bridge mode accepts associations from client devices. Wireless bridges can associate only with non-root bridges.

詳細說明: 「非根橋」接受來自Client 設備的連結   (無線橋接器只可與非根橋結器連結)

 

• Root Bridge without Wireless Clients (AP1200, 1240, 1310, BR1410)   
  Only non-root bridges can associate with root bridges.

只有「非根橋」可以與「根橋」連結 

 

• Non-Root Bridge without Wireless Clients (AP1200, 1240, 1310, BR1410)
  Specifies that the access point operates as a non-root bridge and must associate to a root bridge. No wireless clients can associate with non-root bridges.

詳細說明 : 無線存取點當作「非根橋」來運作必須與根橋連結。  無網路線client不能與非根橋連結

Workgroup Bridge(AP1100, 1130, 1200, 1240, 1310)
In workgroup bridge mode, the unit associates to another access point as a client and provides a network connectionto the devices connected to its Ethernet port. The workgroup bridge associates to an access point on your network. When you configure one radio interface as a workgroup bridge, the other radio interface is automatically disabled.

在workgroup bridge mode模式下，組合件像client一樣連結其他無線存取點燃後提供一個連結Ethernet port網路連結裝置。workgroup bridge 連結到一個無線存取點

 

• Scanner (AP1100, 1130, 1200, 1240, 1310)
  This option is supported only when used with a WLSE device on your network. It specifies that the access point operates as a radio scanner only and does not accept associations from client devices. As a scanner, the access point collects radio data and sends it to the WDS access point on your network.
• 當WLSE裝置用在您的網路時,AP當作掃描無線廣播的裝置.並且不同意與其他用戶端裝置連結,身為一個掃描的裝置,AP收集無線廣播資料,並送出到您網路上的WDS AP