参考链接 c++ - Detecting SSD in Windows - Stack Overflow
#ifndef StorageDeviceTrimProperty
#define StorageDeviceTrimProperty 8
#endif
#ifndef DEVICE_TRIM_DESCRIPTOR
typedef struct _DEVICE_TRIM_DESCRIPTOR {
DWORD Version;
DWORD Size;
BOOLEAN TrimEnabled;
} DEVICE_TRIM_DESCRIPTOR, *PDEVICE_TRIM_DESCRIPTOR;
#endif
#ifndef StorageDeviceSeekPenaltyProperty
#define StorageDeviceSeekPenaltyProperty 7
#endif
#ifndef DEVICE_SEEK_PENALTY_DESCRIPTOR
typedef struct _DEVICE_SEEK_PENALTY_DESCRIPTOR {
DWORD Version;
DWORD Size;
BOOLEAN IncursSeekPenalty;
} DEVICE_SEEK_PENALTY_DESCRIPTOR, *PDEVICE_SEEK_PENALTY_DESCRIPTOR;
#endif
struct ATAIdentifyDeviceQuery
{
ATA_PASS_THROUGH_EX header;
WORD data[256];
};
//Open drive as such: "\\?\PhysicalDriveX" where X is the drive number
//INFO: To get drive number from a logical drive letter, check this method:
// (But keep in mind that a single logical drive, or a volume,
// can span across several physical drives, as a "spanned volume.")
// http://stackoverflow.com/a/11683906/843732
#include <WinIoCtl.h>
#include <Ntddscsi.h>
DWORD bytesReturned;
//As an example, let's test 1st physical drive
HANDLE hDevice = ::CreateFile(L"\\\\?\\PhysicalDrive0",
GENERIC_READ | GENERIC_WRITE, //We need write access to send ATA command to read RPMs
FILE_SHARE_READ | FILE_SHARE_WRITE, NULL,
OPEN_EXISTING, 0, NULL);
if(hDevice != INVALID_HANDLE_VALUE)
{
//Check TRIM -- should be Y for SSD
_tprintf(L"TRIM=");
STORAGE_PROPERTY_QUERY spqTrim;
spqTrim.PropertyId = (STORAGE_PROPERTY_ID)StorageDeviceTrimProperty;
spqTrim.QueryType = PropertyStandardQuery;
bytesReturned = 0;
DEVICE_TRIM_DESCRIPTOR dtd = {0};
if(::DeviceIoControl(hDevice, IOCTL_STORAGE_QUERY_PROPERTY,
&spqTrim, sizeof(spqTrim), &dtd, sizeof(dtd), &bytesReturned, NULL) &&
bytesReturned == sizeof(dtd))
{
//Got it
_tprintf(L"%s", dtd.TrimEnabled ? L"Y" : L"N");
}
else
{
//Failed
int err = ::GetLastError();
_tprintf(L"?");
}
//Check the seek-penalty value -- should be N for SSD
_tprintf(L", seekPenalty=");
STORAGE_PROPERTY_QUERY spqSeekP;
spqSeekP.PropertyId = (STORAGE_PROPERTY_ID)StorageDeviceSeekPenaltyProperty;
spqSeekP.QueryType = PropertyStandardQuery;
bytesReturned = 0;
DEVICE_SEEK_PENALTY_DESCRIPTOR dspd = {0};
if(::DeviceIoControl(hDevice, IOCTL_STORAGE_QUERY_PROPERTY,
&spqSeekP, sizeof(spqSeekP), &dspd, sizeof(dspd), &bytesReturned, NULL) &&
bytesReturned == sizeof(dspd))
{
//Got it
_tprintf(L"%s", dspd.IncursSeekPenalty ? L"Y" : L"N");
}
else
{
//Failed
int err = ::GetLastError();
_tprintf(L"?");
}
//Get drive's RPMs reading -- should be 1 for SSD
//CODE SOURCE: https://emoacht.wordpress.com/2012/11/06/csharp-ssd/
_tprintf(L", RPM=");
ATAIdentifyDeviceQuery id_query;
memset(&id_query, 0, sizeof(id_query));
id_query.header.Length = sizeof(id_query.header);
id_query.header.AtaFlags = ATA_FLAGS_DATA_IN;
id_query.header.DataTransferLength = sizeof(id_query.data);
id_query.header.TimeOutValue = 5; //Timeout in seconds
id_query.header.DataBufferOffset = offsetof(ATAIdentifyDeviceQuery, data[0]);
id_query.header.CurrentTaskFile[6] = 0xec; // ATA IDENTIFY DEVICE
bytesReturned = 0;
if(::DeviceIoControl(hDevice, IOCTL_ATA_PASS_THROUGH,
&id_query, sizeof(id_query), &id_query, sizeof(id_query), &bytesReturned, NULL) &&
bytesReturned == sizeof(id_query))
{
//Got it
//Index of nominal media rotation rate
//SOURCE: http://www.t13.org/documents/UploadedDocuments/docs2009/d2015r1a-ATAATAPI_Command_Set_-_2_ACS-2.pdf
// 7.18.7.81 Word 217
//QUOTE: Word 217 indicates the nominal media rotation rate of the device and is defined in table:
// Value Description
// --------------------------------
// 0000h Rate not reported
// 0001h Non-rotating media (e.g., solid state device)
// 0002h-0400h Reserved
// 0401h-FFFEh Nominal media rotation rate in rotations per minute (rpm)
// (e.g., 7 200 rpm = 1C20h)
// FFFFh Reserved
#define kNominalMediaRotRateWordIndex 217
_tprintf(L"%d", (UINT)id_query.data[kNominalMediaRotRateWordIndex]);
}
else
{
//Failed
int err = ::GetLastError();
_tprintf(L"?");
}
_tprintf(L"\n");
::CloseHandle(hDevice);
}