Le Farfadet Spatial n00b ![n00b n00b](https://i-blog.csdnimg.cn/blog_migrate/586b8c413b753e47139b54953871fcb8.gif) 注册时间: 2011-01-03 帖子: 70 |
发表于: Sat Jul 16, 2011 12:02 pm 发表主题: [Solved] Missing dependencies in the kernel | ![引用并回复 引用并回复](https://i-blog.csdnimg.cn/blog_migrate/62a1b504ffc16d7453174bb95ac38c14.gif) |
| Hello everybody out there! After more than ten years using Linux, it is the first time I compile a kernel! Well, as it is the first time, I have some troubles. Not that many, in fact. I have done "emerge gentoo-sources". After leaving "make menuconfig", I get the following warnings:
代码: | warning: (SCHED_AUTOGROUP) selects CGROUP_SCHED which has unmet direct dependencies (CGROUPS && EXPERIMENTAL) warning: (ACPI_HOTPLUG_CPU) selects ACPI_CONTAINER which has unmet direct dependencies (ACPI && EXPERIMENTAL) warning: (MEDIA_TUNER) selects MEDIA_TUNER_TEA5761 which has unmet direct dependencies (MEDIA_SUPPORT && VIDEO_MEDIA && I2C && EXPERIMENTAL) | All the hardware is a brand new one, and I do not want anything experimental in this kernel. Therefore, I do not want to enable "EXPERIMENTAL", and I need to deselect those options. The trouble is, I do not want to directly change ".config" (comments explicitly tell not to do so anyway), and I have some trouble to find out the options into "menuconfig". After a long while, I have finally found out that "SCHED_AUTOGROUP" stands for "General setup --> Automatic process group scheduling," and I have disabled it. But, after long searching, I have not been able to find out what "ACPI_HOTPLUG_CPU" and "MEDIA_TUNER" stand for. Can somebody help me? Best regards. The Spacial Sprite 最后进行编辑的是 Le Farfadet Spatial on Mon Jul 18, 2011 6:33 pm, 总计第 2 次编辑 | |
返回页首 |
|
![](https://i-blog.csdnimg.cn/blog_migrate/9d9c1dde738d74f1156114f3fe31f3da.gif) |
Aquous l33t ![l33t l33t](https://i-blog.csdnimg.cn/blog_migrate/e5a4e9770b787ba90f974a1c0b420f02.gif) 注册时间: 2011-01-08 帖子: 622 |
发表于: Sat Jul 16, 2011 12:31 pm 发表主题: | ![引用并回复 引用并回复](https://i-blog.csdnimg.cn/blog_migrate/62a1b504ffc16d7453174bb95ac38c14.gif) |
| Press / in menuconfig to enter search mode. | |
返回页首 |
|
![](https://i-blog.csdnimg.cn/blog_migrate/9d9c1dde738d74f1156114f3fe31f3da.gif) |
Le Farfadet Spatial n00b ![n00b n00b](https://i-blog.csdnimg.cn/blog_migrate/586b8c413b753e47139b54953871fcb8.gif) 注册时间: 2011-01-03 帖子: 70 |
发表于: Sat Jul 16, 2011 4:22 pm 发表主题: | ![引用并回复 引用并回复](https://i-blog.csdnimg.cn/blog_migrate/62a1b504ffc16d7453174bb95ac38c14.gif) |
| Hello everybody out there!
Aquous 写到: | Press / in menuconfig to enter search mode. | Thank you. Indeed, pressing "/," I can make some search for configure string. Anyway, I still have some trouble localising either "ACPI_HOTPLUG_CPU" or "MEDIA_TUNER". The search result does not give any location for them, as if they are located in the main menu (Kernel Configuration). Though, I cannot find any corresponding option in the main menu. It seems like these options are hidden until you select an option, but I do not know what option will make them appear. I have tried to enable "Prompt for development and/or incomplete code/drivers" (EXPERIMENTAL), but it did not make them appear. Best regards. The Spacial Sprite | |
返回页首 |
|
![](https://i-blog.csdnimg.cn/blog_migrate/9d9c1dde738d74f1156114f3fe31f3da.gif) |
Hu Watchman ![Watchman Watchman](https://i-blog.csdnimg.cn/blog_migrate/4cc305eb7da5b4198309b2299c2614b2.gif) 注册时间: 2007-03-06 帖子: 7748 |
发表于: Sat Jul 16, 2011 4:51 pm 发表主题: | ![引用并回复 引用并回复](https://i-blog.csdnimg.cn/blog_migrate/62a1b504ffc16d7453174bb95ac38c14.gif) |
| Some options are not directly available to the user, and are instead used to aggregate other settings. You did not specify the kernel version you are using, but I can point you in the general direction.
drivers/acpi/Kconfig: | config ACPI_HOTPLUG_CPU bool depends on ACPI_PROCESSOR && HOTPLUG_CPU select ACPI_CONTAINER default y |
drivers/media/common/tuners/Kconfig: | config MEDIA_TUNER tristate default VIDEO_MEDIA && I2C depends on VIDEO_MEDIA && I2C select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_MT20XX if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_TEA5761 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_TEA5767 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_TDA9887 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_MC44S803 if !MEDIA_TUNER_CUSTOMISE | | |
返回页首 |
|
![](https://i-blog.csdnimg.cn/blog_migrate/9d9c1dde738d74f1156114f3fe31f3da.gif) |
Le Farfadet Spatial n00b ![n00b n00b](https://i-blog.csdnimg.cn/blog_migrate/586b8c413b753e47139b54953871fcb8.gif) 注册时间: 2011-01-03 帖子: 70 |
发表于: Sat Jul 16, 2011 7:33 pm 发表主题: | ![引用并回复 引用并回复](https://i-blog.csdnimg.cn/blog_migrate/62a1b504ffc16d7453174bb95ac38c14.gif) |
| Hello everybody out there.
Hu 写到: | Some options are not directly available to the user, and are instead used to aggregate other settings. | If I understand well, it means that I need to deselect "ACPI_PROCESSOR," "HOTPLUG_CPU," "VIDEO_MEDIA" and "I2C," needn’t I? Well, actually I want to only deselect experimental stuff. I guess there is a way to know what is experimental and what is not experimental. The question is: what is that way?
引用: | You did not specify the kernel version you are using | 2.6.38 Regards. The Spacial Sprite | |
返回页首 |
|
![](https://i-blog.csdnimg.cn/blog_migrate/9d9c1dde738d74f1156114f3fe31f3da.gif) |
Le Farfadet Spatial n00b ![n00b n00b](https://i-blog.csdnimg.cn/blog_migrate/586b8c413b753e47139b54953871fcb8.gif) 注册时间: 2011-01-03 帖子: 70 |
发表于: Sat Jul 16, 2011 10:46 pm 发表主题: | ![引用并回复 引用并回复](https://i-blog.csdnimg.cn/blog_migrate/62a1b504ffc16d7453174bb95ac38c14.gif) |
| Hello everybody out there! When "EXPERIMENTAL" is not enable, I cannot find "ACPI_CONTAINER." When "EXPERIMENTAL" is enable, then I can find "ACPI_CONTAINER", but I can only either build it in or modularised it, I cannot disable it. Tell me if I am mistaken, as it seems that I have to choose between some experimental support of ACPI or no ACPI at all. Some ACPI support can be useful, so I have enabled "EXPERIMENTAL" and modularised "ACPI_CONTAINER." At least, I can hope being able to unload the module if I get some trouble with it. Anyway, with this configuration, I have no more missing dependencies, I can boot this kernel with no error message and I do not have any trouble while running it. So far … Before I turn this thread as resolved, is it possible to confirm with you that my understanding is correct? Regards. The Spacial Sprite | |
返回页首 |
|
![](https://i-blog.csdnimg.cn/blog_migrate/9d9c1dde738d74f1156114f3fe31f3da.gif) |
Le Farfadet Spatial n00b ![n00b n00b](https://i-blog.csdnimg.cn/blog_migrate/586b8c413b753e47139b54953871fcb8.gif) 注册时间: 2011-01-03 帖子: 70 |
发表于: Mon Jul 18, 2011 6:32 pm 发表主题: | ![引用并回复 引用并回复](https://i-blog.csdnimg.cn/blog_migrate/62a1b504ffc16d7453174bb95ac38c14.gif) |
| Hello everybody out there! I guess that nobody giving any answer either means that I have understood well or nobody can give me any more information. I set this thread as solved, thank you. Best regards. The Spacial Sprite | |
返回页首 |
|
![](https://i-blog.csdnimg.cn/blog_migrate/9d9c1dde738d74f1156114f3fe31f3da.gif) |
Punchcutter Apprentice ![Apprentice Apprentice](https://i-blog.csdnimg.cn/blog_migrate/4bdcfed31d5b33cdcd851c91f3c48a36.gif) ![](https://i-blog.csdnimg.cn/blog_migrate/f61ee5032de65d5c6b7a945121d09d76.jpeg) 注册时间: 2007-02-11 帖子: 209 |
发表于: Sun Sep 25, 2011 11:37 pm 发表主题: | ![引用并回复 引用并回复](https://i-blog.csdnimg.cn/blog_migrate/62a1b504ffc16d7453174bb95ac38c14.gif) |
| I'm just compiling gentoo-sources 2.6.39-r3, and running into these troubles. Thanks to those on this thread for helping me find my way around. What I found regarding the MEDIA_TUNER stuff was that I had to enable Customize analog and hybrid tuner modules to build, then go into the tuners subscreen, where everything was turned on (as modules). If I turned them all off, then went up a level and turned off the aforementioned customization category, after I exited menuconfig, everything would be returned to the original state (with all the device modules turned on). So what I did was turn off all the individual device modules but left Customize analog and hybrid tuner modules to build activated. In this way, the device modules appear to remain turned off. As for the CPU hotplugging problem, I found (similarly), that if I turn on EXPERIMENTAL in order to modularize the CONTAINER (change to M), and then try to turn off EXPERIMENTAL again, the CONTAINER is reverted to Y. I have decided to accept this state of affairs, rather than leave EXPERIMENTAL turned on. I hope these problems are temporary quirks in this particular kernel version, or series, and that they will go away in later versions. | |
返回页首 |
|
![](https://i-blog.csdnimg.cn/blog_migrate/9d9c1dde738d74f1156114f3fe31f3da.gif) |
genterminl Guru ![Guru Guru](https://i-blog.csdnimg.cn/blog_migrate/700449581513fa2a7dbcbf24f6935bc1.gif) ![](http://forums.gentoo.org/images/avatars/18394718174d3781450d1a8.jpg) 注册时间: 2005-02-12 帖子: 323 来自: Connecticut, USA |
发表于: Mon Nov 14, 2011 8:14 pm 发表主题: | ![引用并回复 引用并回复](https://i-blog.csdnimg.cn/blog_migrate/62a1b504ffc16d7453174bb95ac38c14.gif) |
| I'm still seeing the same issue trying to configure MEDIA_TUNER in 3.0.6. I do not remember seeing these issues previously, and I'm now running 2.6.39-r3 (gentoo-sources) | |
返回页首 |
|
![](https://i-blog.csdnimg.cn/blog_migrate/9d9c1dde738d74f1156114f3fe31f3da.gif) |
robinmarlow Tux's lil' helper ![Tux's lil' helper Tux's lil' helper](https://i-blog.csdnimg.cn/blog_migrate/be818a499cc947fbeb3b63bbaa06704c.gif) 注册时间: 2004-03-10 帖子: 148 |
发表于: Tue Oct 09, 2012 9:28 pm 发表主题: | ![引用并回复 引用并回复](https://i-blog.csdnimg.cn/blog_migrate/62a1b504ffc16d7453174bb95ac38c14.gif) |
| In case anyone else finds this through google, I just met a similar issue with kernel 3.6.1 had the error: warning: (VIDEO_EM28XX && VIDEO_PVRUSB2 && VIDEO_TLG2300 && VIDEO_CX231XX && VIDEO_TM6000 && VIDEO_USBVISION && VIDEO_BT848 && VIDEO_CX18 && VIDEO_CX23885 && VIDEO_CX88 && VIDEO_IVTV && VIDEO_MXB && VIDEO_SAA7134 && VIDEO_SAA7164 && VIDEO_GO7007) selects VIDEO_TUNER which has unmet direct dependencies (MEDIA_SUPPORT && MEDIA_TUNER) but couldn't understand how to enable MEDIA_TUNER I eventually found that even though I'm just using DVB cards I needed to enable CONFIG_MEDIA_ANALOG_TV_SUPPORT as hidden within the notes were: "Note: There are several DVB cards that are based on chips that support both analog and digital TV. Disabling this option will disable support for them." Robin | |