TMS320F28335出现故障调试

##研旭DSP一体板故障调试
CCS6.0使用调试器XDS100 V2时不能连接上TMS320F28335，并出现如下报错：

C28xx: Failed CPU Reset: (Error -1137 @ 0x0) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 5.1.450.0) 
C28xx: Trouble Reading Register PC: (Error -1137 @ 0x0) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 5.1.450.0) 
C28xx: Trouble Reading Register ST1: (Error -1137 @ 0x6) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 5.1.450.0) 
C28xx: GEL: Error while executing OnReset(1): Target failed to read register ST1 	at (ST1&~(0x0100)) [f28335.gel:312] 	at C28x_Mode() [f28335.gel:38] 	at OnReset(1) .
C28xx: Power Failure on Target CPU

测试板上各点电压发现为输入电源故障，本来为5V输入转3.3V与1.8V，结果5V的输入只剩3.46V，达不到AMS1117降压芯片的最低输入电压要求，使DSP芯片不能正常工作。

更换输入电源后板子即可正常工作。