本代码来自于韦东山老师嵌入式二期驱动视频所讲解,仅供学习参考。如有侵权等行为,可当即撤销本文章。更多信息请关注www.100ask.com!!!
在linux-2.6.22.6/arch/arm/mach-s3c2440/mach-smdk2440.c找到mach-smdk2440.c这个文件,打开文件,找到如的代码段:
/* 240x320 */
static struct s3c2410fb_mach_info smdk2440_lcd_cfg __initdata = {…
修改为:
/* 240x320 */
static struct s3c2410fb_mach_info smdk2440_lcd_cfg_240x320 __initdata = {…
将复制并在此基础上进行修改为4.3寸lcd的相应参数,修改后的mach-smdk2440.c代码如下:
/* linux/arch/arm/mach-s3c2440/mach-smdk2440.c
*
* Copyright (c) 2004,2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* http://www.fluff.org/ben/smdk2440/
*
* Thanks to Dimity Andric and TomTom for the loan of an SMDK2440.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-lcd.h>
#include <asm/arch/idle.h>
#include <asm/arch/fb.h>
#include <asm/plat-s3c24xx/s3c2410.h>
#include <asm/plat-s3c24xx/s3c2440.h>
#include <asm/plat-s3c24xx/clock.h>
#include <asm/plat-s3c24xx/devs.h>
#include <asm/plat-s3c24xx/cpu.h>
#include <asm/plat-s3c24xx/common-smdk.h>
static struct map_desc smdk2440_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
{
.virtual = (u32)S3C24XX_VA_ISA_WORD,
.pfn = __phys_to_pfn(S3C2410_CS2),
.length = 0x10000,
.type = MT_DEVICE,
}, {
.virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000,
.pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
.length = SZ_4M,
.type = MT_DEVICE,
}, {
.virtual = (u32)S3C24XX_VA_ISA_BYTE,
.pfn = __phys_to_pfn(S3C2410_CS2),
.length = 0x10000,
.type = MT_DEVICE,
}, {
.virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
.pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
.length = SZ_4M,
.type = MT_DEVICE,
}
};
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
static struct s3c2410_uartcfg smdk2440_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
},
/* IR port */
[2] = {
.hwport = 2,
.flags = 0,
.ucon = 0x3c5,
// .ulcon = 0x43, // www.100ask.net
.ulcon = 0x33,
.ufcon = 0x51,
}
};
/* LCD driver info */
static struct s3c2410fb_mach_info smdk2440_lcd_cfg_1024x768 __initdata = {
.regs = {
.lcdcon1 = S3C2410_LCDCON1_TFT16BPP | \
S3C2410_LCDCON1_TFT | \
S3C2410_LCDCON1_CLKVAL(0x01),
.lcdcon2 = S3C2410_LCDCON2_VBPD(1) | \
S3C2410_LCDCON2_LINEVAL(1023) | \
S3C2410_LCDCON2_VFPD(1) | \
S3C2410_LCDCON2_VSPW(1),
.lcdcon3 = S3C2410_LCDCON3_HBPD(15) | \
S3C2410_LCDCON3_HOZVAL(767) | \
S3C2410_LCDCON3_HFPD(199),
.lcdcon4 = S3C2410_LCDCON4_MVAL(13) | \
S3C2410_LCDCON4_HSPW(15),
#if 0
.lcdcon5 = S3C2410_LCDCON5_FRM565 |
S3C2410_LCDCON5_INVVLINE |
S3C2410_LCDCON5_INVVFRAME |
S3C2410_LCDCON5_PWREN |
S3C2410_LCDCON5_HWSWP,
#else
.lcdcon5 = S3C2410_LCDCON5_FRM565 |
S3C2410_LCDCON5_HWSWP,
#endif
},
.lpcsel = 0xf82,
.gpccon = 0xaa955699,
.gpccon_mask = 0xffc003cc,
.gpcup = 0x0000ffff,
.gpcup_mask = 0xffffffff,
.gpdcon = 0xaa95aaa1,
.gpdcon_mask = 0xffc0fff0,
.gpdup = 0x0000faff,
.gpdup_mask = 0xffffffff,
.fixed_syncs = 1,
.type = S3C2410_LCDCON1_TFT,
.width = 1024,
.height = 768,
.xres = {
.min = 1024,
.max = 1024,
.defval = 1024,
},
.yres = {
.max = 768,
.min = 768,
.defval = 768,
},
.bpp = {
.min = 16,
.max = 16,
.defval = 16,
},
};
/* 240x320 */
static struct s3c2410fb_mach_info smdk2440_lcd_cfg_240x320 __initdata = {
.regs = {
.lcdcon1 = S3C2410_LCDCON1_TFT16BPP | \
S3C2410_LCDCON1_TFT | \
S3C2410_LCDCON1_CLKVAL(0x04),
.lcdcon2 = S3C2410_LCDCON2_VBPD(5) | \
S3C2410_LCDCON2_LINEVAL(319) | \
S3C2410_LCDCON2_VFPD(3) | \
S3C2410_LCDCON2_VSPW(1),
.lcdcon3 = S3C2410_LCDCON3_HBPD(10) | \
S3C2410_LCDCON3_HOZVAL(239) | \
S3C2410_LCDCON3_HFPD(1),
.lcdcon4 = S3C2410_LCDCON4_MVAL(13) | \
S3C2410_LCDCON4_HSPW(0),
.lcdcon5 = S3C2410_LCDCON5_FRM565 |
S3C2410_LCDCON5_INVVLINE |
S3C2410_LCDCON5_INVVFRAME |
S3C2410_LCDCON5_PWREN |
S3C2410_LCDCON5_HWSWP,
},
.gpccon = 0xaaaa56aa,
.gpccon_mask = 0xffffffff,
.gpcup = 0xffffffff,
.gpcup_mask = 0xffffffff,
.gpdcon = 0xaaaaaaaa,
.gpdcon_mask = 0xffffffff,
.gpdup = 0xffffffff,
.gpdup_mask = 0xffffffff,
.fixed_syncs = 1,
.type = S3C2410_LCDCON1_TFT,
.width = 240,
.height = 320,
.xres = {
.min = 240,
.max = 240,
.defval = 240,
},
.yres = {
.max = 320,
.min = 320,
.defval = 320,
},
.bpp = {
.min = 16,
.max = 16,
.defval = 16,
},
};
/* 480x272 */
static struct s3c2410fb_mach_info smdk2440_lcd_cfg __initdata = {
.regs = {
.lcdcon1 = S3C2410_LCDCON1_TFT16BPP | \
S3C2410_LCDCON1_TFT | \
S3C2410_LCDCON1_CLKVAL(0x04),
.lcdcon2 = S3C2410_LCDCON2_VBPD(1) | \
S3C2410_LCDCON2_LINEVAL(271) | \
S3C2410_LCDCON2_VFPD(1) | \
S3C2410_LCDCON2_VSPW(9),
.lcdcon3 = S3C2410_LCDCON3_HBPD(1) | \
S3C2410_LCDCON3_HOZVAL(479) | \
S3C2410_LCDCON3_HFPD(1),
.lcdcon4 = S3C2410_LCDCON4_MVAL(13) | \
S3C2410_LCDCON4_HSPW(40),
.lcdcon5 = S3C2410_LCDCON5_FRM565 |
S3C2410_LCDCON5_INVVLINE |
S3C2410_LCDCON5_INVVFRAME |
S3C2410_LCDCON5_PWREN |
S3C2410_LCDCON5_HWSWP,
},
.gpccon = 0xaaaa56aa,
.gpccon_mask = 0xffffffff,
.gpcup = 0xffffffff,
.gpcup_mask = 0xffffffff,
.gpdcon = 0xaaaaaaaa,
.gpdcon_mask = 0xffffffff,
.gpdup = 0xffffffff,
.gpdup_mask = 0xffffffff,
.fixed_syncs = 1,
.type = S3C2410_LCDCON1_TFT,
.width = 480,
.height = 272,
.xres = {
.min = 480,
.max = 480,
.defval = 480,
},
.yres = {
.max = 272,
.min = 272,
.defval = 272,
},
.bpp = {
.min = 16,
.max = 16,
.defval = 16,
},
};
/* 320x240 */
static struct s3c2410fb_mach_info smdk2440_lcd_cfg_320x240 __initdata = {
.regs = {
.lcdcon1 = S3C2410_LCDCON1_TFT16BPP | \
S3C2410_LCDCON1_TFT | \
S3C2410_LCDCON1_CLKVAL(0x04),
.lcdcon2 = S3C2410_LCDCON2_VBPD(1) | \
S3C2410_LCDCON2_LINEVAL(239) | \
S3C2410_LCDCON2_VFPD(5) | \
S3C2410_LCDCON2_VSPW(1),
.lcdcon3 = S3C2410_LCDCON3_HBPD(36) | \
S3C2410_LCDCON3_HOZVAL(319) | \
S3C2410_LCDCON3_HFPD(19),
.lcdcon4 = S3C2410_LCDCON4_MVAL(13) | \
S3C2410_LCDCON4_HSPW(5),
.lcdcon5 = S3C2410_LCDCON5_FRM565 |
S3C2410_LCDCON5_INVVLINE |
S3C2410_LCDCON5_INVVFRAME |
S3C2410_LCDCON5_INVVDEN |
S3C2410_LCDCON5_PWREN |
S3C2410_LCDCON5_HWSWP,
},
.gpccon = 0xaaaa56aa,
.gpccon_mask = 0xffffffff,
.gpcup = 0xffffffff,
.gpcup_mask = 0xffffffff,
.gpdcon = 0xaaaaaaaa,
.gpdcon_mask = 0xffffffff,
.gpdup = 0xffffffff,
.gpdup_mask = 0xffffffff,
.fixed_syncs = 1,
.type = S3C2410_LCDCON1_TFT,
.width = 320,
.height = 240,
.xres = {
.min = 320,
.max = 320,
.defval = 320,
},
.yres = {
.max = 240,
.min = 240,
.defval = 240,
},
.bpp = {
.min = 16,
.max = 16,
.defval = 16,
},
};
/* SDI */
static struct resource s3c2440_sdi_resource[] = {
[0] = {
.start = S3C2410_PA_SDI,
.end = S3C2410_PA_SDI + S3C24XX_SZ_SDI - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_SDI,
.end = IRQ_SDI,
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device s3c2440_device_sdi = {
.name = "s3c2440-sdi",
.id = -1,
.num_resources = ARRAY_SIZE(s3c2440_sdi_resource),
.resource = s3c2440_sdi_resource,
};
static struct platform_device *smdk2440_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_iis,
&s3c2440_device_sdi,
};
static void __init smdk2440_map_io(void)
{
s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
}
static void __init smdk2440_machine_init(void)
{
s3c24xx_fb_set_platdata(&smdk2440_lcd_cfg);
platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices));
smdk_machine_init();
}
MACHINE_START(S3C2440, "SMDK2440")
/* Maintainer: Ben Dooks <ben@fluff.org> */
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
.init_irq = s3c24xx_init_irq,
.map_io = smdk2440_map_io,
.init_machine = smdk2440_machine_init,
.timer = &s3c24xx_timer,
MACHINE_END
保存为4.3寸LCD_mach-smdk2440.c好文件备用,然后把未经修改的内核源码linux-2.6.22.6.tar.bz2、linux-2.6.22.6_jz2440.patch、4.3寸LCD_mach-smdk2440.c这三个文件放到/work/system目录下。
1.tar xjf linux-2.6.22.6.tar.bz2 ,cd linux-2.6.22.6
2. patch -p1 < ../linux-2.6.22.6_jz2440.patch
3.mv ../4.3寸LCD_mach-smdk2440.c arch/arm/mach-s3c2440/mach-smdk2440.c
4.cp config_ok .config
5.make uImage
这样就生成了支持4.3寸lcd的uImage.