adb shell
# am start -n {包(package)名}/{包名}.{活动(activity)名称}
启动的方法为
# am start -n 包(package)名/包名.活动(activity)名称
启动的方法可以从每个应用的AndroidManifest.xml的文件中得到
Music 和 Video(音乐和视频)的启动方法为:
# am start -n com.android.music/com.android.music.MusicBrowserActivity
# am start -n com.android.music/com.android.music.VideoBrowserActivity
# am start -n com.android.music/com.android.music.MediaPlaybackActivity
Camera(照相机)的启动方法为:
# am start -n com.android.camera/com.android.camera.Camera
Browser(浏览器)的启动方法为:
# am start -n com.android.browser/com.android.browser.BrowserActivity
启动浏览器 :
am start -a android.intent.action.VIEW -d http://www.google.cn/
拨打电话 :
am start -a android.intent.action.CALL -d tel:10086
启动 google map 直接定位到北京 :
am start -a android.intent.action.VIEW geo:0,0?q=beijing
adb logcat 详解
Android Debug Bridge version 1.0.29
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s - directs command to the USB device or emulator with
the given serial number. Overrides ANDROID_SERIAL
environment variable.
-p - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect [:] - connect to a device via TCP/IP
Port 5555 is used by default if no port number is specified.
disconnect [[:]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devices.
device commands:
adb push - copy file/dir to device
adb pull [] - copy file/dir from device
adb sync [ ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell - run remote shell command
adb emu - run emulator console command
adb logcat [ ] - View device log
adb forward - forward socket connections
forward specs are one of:
tcp:
localabstract:
localreserved:
localfilesystem:
dev:
jdwp: (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] [--algo --key --iv ]
- push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-s' means install on SD card instead of internal storage)
('--algo', '--key', and '--iv' mean the file is encrypted already)
adb uninstall [-k] - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f ] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosystem] []
- write an archive of the device's data to .
If no -f option is supplied then the data is written
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks themselves
in the archive; the default is noapk.)
(-shared|-noshared enable/disable backup of the device's
shared storage / SD card contents; the default is noshared.)
(-all means to back up all installed applications)
(-system|-nosystem toggles whether -all automatically includes
system applications; the default is to include system apps)
( is the list of applications to be backed up. If
the -all or -shared flags are passed, then the package
list is optional. Applications explicitly given on the
command line will be included even if -nosystem would
ordinarily cause them to be omitted.)
adb restore - restore device contents from the backup archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints:
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ ]
can be interpreted in several ways:
- If is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list of the following values
or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed.
查看所有当前通过USB设备连接的设备
# adb devices List of devices attached emulator-5554 device 0288424641407417 device HT9CRP810308 device
指定某一个模拟器或真机
# adb -s emulator-5554 shell
打印日志
# adb logcat
(1) 下面命令将只会显示AndroidRuntime类型的Error消息:
adb logcat -s AndroidRuntime
(2) 显示全部日志信息:adb logcat
(3) 显示某一TAG的日志信息:adb logcat -s TAG名称
(4) 显示某一TAG的某一级别的日志信息:adb logcat TAG名称:级别.....TAG名称:级别 *:S
注:日志级别(V-verbose,D-debug,I-info,W-warning,E-error,F-fatal,S-silent),*:S(确保日志输出的时候是按照过滤器的说明限制)
(5) 显示某一级别以上的全部日志信息:adb logcat *:级别
(6) 以某种格式显示日志信息:adb logcat -v 格式
注:日志格式(brief,process,tag,thread,raw,time,long)
(7) 显示缓冲区中的日志信息:adb logcat -b 缓冲区类型
注:缓冲区类型(radio-无线缓冲区,events-事件缓冲区,main-主缓冲区,默认)
(8) 清理已经存在的日志:adb logcat -c
(9) 将日志显示在控制台后退出:adb logcat -d
(10) 将日志输出到文件:adb logcat -f 文件名
注:DDMS的LogCat中文乱码:修改MultiLineReceiver类中的addOutput()方法,将其中的"ISO-8859-1"改成"UTF-8",重新编译源码。
实例:adb logcat -v time -s videocamera
意思是说,会打印出 log 信息中时间,以及包含关键字 "videocamera" 的所有 log
本文转自:http://www.cnblogs.com/laughingQing/p/4555145.html