恒玄BES调试笔记-BES2500如何修改ESCO重传次数

修改esco重传次数，可以解决某些问题，比如炸裂声等，根据项目需要去更改。

platform\drivers\bt\best2300a\bt_drv_config.c

uint8_t bt_setting_2300a[104] =
{
    0x00,//clk_off_force_even
    0x01,//msbc_pcmdout_zero_flag
    0x04,//ld_sco_switch_timeout
    0x00,//stop_latency2
    0x01,//force_max_slot
    0xc8,0x00,//send_connect_info_to
    0x20,0x03,//sco_to_threshold
    0x40,0x06,//acl_switch_to_threshold
    0x3a,0x00,//sync_win_size
    0x01,//polling_rxseqn_mode
#ifdef __BT_ONE_BRING_TWO__
    0x01,//two_slave_sched_en
#else
    0x00,//two_slave_sched_en
#endif
    0xff,//music_playing_link
    0x06,//wesco_nego = 2;//修改这里